From mboxrd@z Thu Jan  1 00:00:00 1970
From: p.zabel@pengutronix.de (Philipp Zabel)
Date: Thu, 10 Aug 2017 12:37:34 +0200
Subject: [PATCH 3/3] reset: uniphier: add analog amplifiers reset control
In-Reply-To: <20170810072703.32433-3-suzuki.katsuhiro@socionext.com>
References: <20170810072703.32433-1-suzuki.katsuhiro@socionext.com>
 <20170810072703.32433-3-suzuki.katsuhiro@socionext.com>
Message-ID: <1502361454.10792.5.camel@pengutronix.de>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Katsuhiro,

On Thu, 2017-08-10 at 16:27 +0900, Katsuhiro Suzuki wrote:
> Add a reset line for analog signal amplifier core (ADAMV) on
> UniPhier LD11/LD20 SoCs.
> 
> > Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
> ---
> ?drivers/reset/reset-uniphier.c | 15 +++++++++++++++
> ?1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
> index f60c137c17cb..cda4a78a58e2 100644
> --- a/drivers/reset/reset-uniphier.c
> +++ b/drivers/reset/reset-uniphier.c
> @@ -196,6 +196,12 @@ static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
> > ?	UNIPHIER_RESET_END,
> ?};
> ?
> +/* Analog signal amplifiers reset data */
> +static const struct uniphier_reset_data uniphier_ld11_adamv_reset_data[] = {
> > +	UNIPHIER_RESETX(100, 0x10, 6), /* EVEA */
> > +	UNIPHIER_RESET_END,
> +};
> +
> ?/* core implementaton */
> ?struct uniphier_reset_priv {
> > ?	struct reset_controller_dev rcdev;
> @@ -415,6 +421,15 @@ static const struct of_device_id uniphier_reset_match[] = {
> > ?		.compatible = "socionext,uniphier-ld20-peri-reset",
> > ?		.data = uniphier_pro4_peri_reset_data,
> > ?	},
> > +	/* Analog signal amplifiers reset */
> > +	{
> > +		.compatible = "socionext,uniphier-ld11-adamv-reset",
> > +		.data = uniphier_ld11_adamv_reset_data,
> > +	},
> > +	{
> > +		.compatible = "socionext,uniphier-ld20-adamv-reset",
> > +		.data = uniphier_ld11_adamv_reset_data,
> > +	},
> > ?	{ /* sentinel */ }
> ?};
> ?MODULE_DEVICE_TABLE(of, uniphier_reset_match);

Please add a patch to describe the new compatible values in
Documentation/devicetree/bindings/reset/uniphier-reset.txt.

regards
Philipp