From: william.wu@rock-chips.com (William Wu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] arm64: dts: rockchip: add usb3 controller node for RK3328 SoCs
Date: Thu, 17 Aug 2017 15:54:49 +0800 [thread overview]
Message-ID: <1502956490-23087-2-git-send-email-william.wu@rock-chips.com> (raw)
In-Reply-To: <1502956490-23087-1-git-send-email-william.wu@rock-chips.com>
RK3328 has one USB 3.0 OTG controller which uses DWC_USB3
core's general architecture. It can act as static xHCI host
controller, static device controller, USB 3.0/2.0 OTG basing
on ID of USB3.0 PHY.
Signed-off-by: William Wu <william.wu@rock-chips.com>
---
Changes in v2:
- Modify the dwc3 quirk "snps,tx-ipgap-linecheck-dis-quirk" to
"snps,dis-tx-ipgap-linecheck-quirk"
.../devicetree/bindings/usb/rockchip,dwc3.txt | 4 +++-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 27 ++++++++++++++++++++++
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
index 0536a93..d6b2e47 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -1,7 +1,9 @@
Rockchip SuperSpeed DWC3 USB SoC controller
Required properties:
-- compatible: should contain "rockchip,rk3399-dwc3" for rk3399 SoC
+- compatible: should be one of the following:
+ - "rockchip,rk3399-dwc3": for rk3399 SoC
+ - "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3": for rk3328 SoC
- clocks: A list of phandle + clock-specifier pairs for the
clocks listed in clock-names
- clock-names: Should contain the following:
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index e6da0ce..14bd8f4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -655,6 +655,33 @@
status = "disabled";
};
+ usbdrd3: usb at ff600000 {
+ compatible = "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3";
+ clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+ <&cru ACLK_USB3OTG>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usbdrd_dwc3: dwc3 at ff600000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff600000 0x0 0x100000>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ status = "disabled";
+ };
+ };
+
gic: interrupt-controller at ff811000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
--
2.0.0
next prev parent reply other threads:[~2017-08-17 7:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-17 7:54 [PATCH v2 0/2] Add usb3 ctrl node on RK3328 SoCs and enable usb3 host on RK3328 evb William Wu
2017-08-17 7:54 ` William Wu [this message]
2017-08-18 9:24 ` [PATCH v2 1/2] arm64: dts: rockchip: add usb3 controller node for RK3328 SoCs Heiko Stuebner
2017-08-21 11:35 ` wlf
2017-08-17 7:54 ` [PATCH v2 2/2] arm64: dts: rockchip: enable usb3 for RK3328 evaluation board William Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502956490-23087-2-git-send-email-william.wu@rock-chips.com \
--to=william.wu@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox