linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [GIT PULL 1/3] i.MX device tree updates for 4.14
@ 2017-08-18  7:53 Shawn Guo
  2017-08-18  7:53 ` [GIT PULL 2/3] Freescale arm64 " Shawn Guo
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Shawn Guo @ 2017-08-18  7:53 UTC (permalink / raw)
  To: linux-arm-kernel

The following changes since commit 5771a8c08880cdca3bfb4a3fc6d309d6bba20877:

  Linux v4.13-rc1 (2017-07-15 15:22:10 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.14

for you to fetch changes up to b3766c518172188b220282fa412ff6f6f65be856:

  ARM: dts: imx6q-bx50v3: Enable i2c recovery mechanism (2017-08-14 09:45:13 +0800)

----------------------------------------------------------------
i.MX device tree updates for 4.14:
 - A series from Andrew Lunn updating imx6-rdu2 board to enable
   on-board Marvell switch support.
 - A series from Jagan Teki updating imx6ul-isiot and imx6ul-geam to
   enable audio card and FEC support.
 - Add support for Toradex Ixora V1.1 and Apalis Evaluation Board
   along with some cleanups.
 - Enable DRM display support for imx6ul-evk and imx7d-sdb board.
 - Add i.MX53 based Beckhoff CX9020 board support.
 - Add GPMI NAND and APBH DMA devices for i.MX7 and enables NAND support
   for imx7-colibri board.
 - Enables the ADV7180 analog video decoder sensor connected to the
   IMX6 IPU on various Gateworks Ventana boards.
 - Minor updates on misc boards and some random cleanups.

----------------------------------------------------------------
Andrew Lunn (5):
      ARM: dts: imx6: RDU2: Add Micrel PHY to FEC
      ARM: dts: imx6: RDU2: Add DSA support for the Marvell 88E6352
      ARM: dts: imx6: RDU2: Add Switch EEPROM
      ARM: dts: imx6: RDU2: Add Switch interrupts
      ARM: dts: imx6: RDU2: Add Micrel PHY interrupt

Fabio Estevam (5):
      ARM: dts: imx7d-sdb: Pass phy-reset-gpios
      ARM: dts: imx6qdl-icore-rqs: Remove unneeded 'fsl,mode' property
      ARM: dts: imx6qdl-gw5xxx: Remove the 'uart-has-rtscts' property
      ARM: dts: imx7d-sdb: Add flexcan support
      ARM: dts: imx6ul-14x14-evk: Remove unrelated pin from ENET group

Gary Bisson (2):
      ARM: dts: imx6qdl-sabrelite: fix USB PHY reset
      ARM: dts: imx6qdl-nitrogen6x: fix USB PHY reset

Gautam Bhat (1):
      ARM: dts: imx7d-sdb: Set VLDO4 outpt to 2.8V for MIPI CSI/DSI

Guy Shapiro (1):
      ARM: dts: imx: update snvs-poweroff mask

Jagan Teki (7):
      ARM: dts: imx6ul-isiot: Move common nodes in imx6ul-isiot.dtsi
      ARM: dts: imx6ul-isiot: Add Sound card with codec node
      ARM: dts: imx6ul-isiot: Add FEC node support
      ARM: dts: imx6ul-geam-kit: Remove re-enabled usdhc1
      ARM: dts: imx6ul-geam: Drop imx6ul-geam.dtsi
      ARM: dts: imx6ul-geam: Skip suffix -kit from dts name
      ARM: dts: imx6ul-geam: Add Sound card with codec node

Jose Alarcon (1):
      ARM: dts: imx6q-bx50v3: Enable i2c recovery mechanism

Marcel Ziswiler (6):
      ARM: dts: imx6q-apalis-ixora: combine aliases
      ARM: dts: imx6qdl-apalis: imx6q-apalis-ixora: get rid of tegra legacy gen1_i2c comment
      ARM: dts: imx6qdl-apalis: reword cam i2c comment
      ARM: dts: imx6q-apalis-ixora: get rid of obsolete fusion comment
      ARM: dts: imx6q-apalis-ixora: add camera i2c bus definition
      ARM: dts: imx6qdl-apalis: imx6q-apalis-ixora: use i2c from dwc hdmi

Marcin Niestroj (1):
      ARM: dts: imx6ul-liteboard: Support poweroff

Marco Franchi (4):
      ARM: dts: imx6ul-evk: Add DRM panel support
      ARM: dts: imx6ul-evk: Pass the 'backlight' property
      ARM: dts: imx7d-sdb: Add DRM panel support
      ARM: dts: imx7d-sdb: Pass 'enable-gpios' and 'power-supply' properties

Martyn Welch (1):
      ARM: dts: imx: Correct B850v3 clock assignment

Oleksij Rempel (1):
      ARM: dts: imx6: RIoTboard provide gpio-line-names

Patrick Bruenn (4):
      dt-bindings: arm: Add entry for Beckhoff CX9020
      ARM: dts: imx53: add srtc node
      ARM: dts: imx53: add alternative UART2 configuration
      ARM: dts: imx: add CX9020 Embedded PC device tree

Sanchayan Maity (4):
      ARM: dts: imx6q-apalis-ixora: fix usdhc2 pinctrl property
      ARM: dts: imx6qdl-apalis: split usdhc1 pinctrl to support 4- and 8-bit
      ARM: dts: imx6: add support for Toradex Ixora V1.1 carrier board
      ARM: dts: imx6q-apalis-eval: add support for Apalis Evaluation Board

Stefan Agner (2):
      ARM: dts: imx7: add GPMI NAND and APBH DMA
      ARM: dts: imx7-colibri: add NAND support

Steffen Trumtrar (1):
      ARM: dts: i.MX25: add RNGB node to dtsi

Tim Harvey (1):
      ARM: dts: imx: ventana: add ADV1780 analog video decoder

 Documentation/devicetree/bindings/arm/bhf.txt      |   6 +
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   5 +-
 arch/arm/boot/dts/imx25.dtsi                       |   7 +
 arch/arm/boot/dts/imx53-cx9020.dts                 | 297 +++++++++++++++++++++
 arch/arm/boot/dts/imx53-pinfunc.h                  |   4 +
 arch/arm/boot/dts/imx53.dtsi                       |   9 +
 arch/arm/boot/dts/imx6dl-gw52xx.dts                |  58 ++++
 arch/arm/boot/dts/imx6dl-gw53xx.dts                |  58 ++++
 arch/arm/boot/dts/imx6dl-gw54xx.dts                |  58 ++++
 arch/arm/boot/dts/imx6dl-riotboard.dts             |  45 ++++
 arch/arm/boot/dts/imx6q-apalis-eval.dts            | 278 +++++++++++++++++++
 arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts      | 291 ++++++++++++++++++++
 arch/arm/boot/dts/imx6q-apalis-ixora.dts           |  32 +--
 arch/arm/boot/dts/imx6q-b850v3.dts                 |   2 +-
 arch/arm/boot/dts/imx6q-bx50v3.dtsi                |  42 +++
 arch/arm/boot/dts/imx6q-gw52xx.dts                 |  58 ++++
 arch/arm/boot/dts/imx6q-gw53xx.dts                 |  58 ++++
 arch/arm/boot/dts/imx6q-gw54xx.dts                 |  58 ++++
 arch/arm/boot/dts/imx6qdl-apalis.dtsi              |  44 ++-
 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi              |  54 ++++
 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi              |   1 -
 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi              |   1 -
 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi              |   1 -
 arch/arm/boot/dts/imx6qdl-gw553x.dtsi              |  54 ++++
 arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi           |   1 -
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi          |  19 ++
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi           |  19 ++
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi            | 112 +++++++-
 arch/arm/boot/dts/imx6qdl.dtsi                     |   1 +
 arch/arm/boot/dts/imx6sl.dtsi                      |   1 +
 arch/arm/boot/dts/imx6sx.dtsi                      |   1 +
 arch/arm/boot/dts/imx6ul-14x14-evk.dts             |  40 ++-
 arch/arm/boot/dts/imx6ul-geam-kit.dts              | 101 -------
 .../boot/dts/{imx6ul-geam.dtsi => imx6ul-geam.dts} |  74 +++++
 arch/arm/boot/dts/imx6ul-isiot-common.dtsi         | 141 ----------
 arch/arm/boot/dts/imx6ul-isiot-emmc.dts            |   1 -
 arch/arm/boot/dts/imx6ul-isiot-nand.dts            |   1 -
 arch/arm/boot/dts/imx6ul-isiot.dtsi                | 183 +++++++++++++
 arch/arm/boot/dts/imx6ul-liteboard.dts             |   4 +
 arch/arm/boot/dts/imx6ul.dtsi                      |   1 +
 arch/arm/boot/dts/imx7-colibri.dtsi                |   9 +
 arch/arm/boot/dts/imx7d-sdb.dts                    |  93 ++++---
 arch/arm/boot/dts/imx7s.dtsi                       |  32 +++
 44 files changed, 2003 insertions(+), 353 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/bhf.txt
 create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts
 create mode 100644 arch/arm/boot/dts/imx6q-apalis-eval.dts
 create mode 100644 arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
 delete mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts
 rename arch/arm/boot/dts/{imx6ul-geam.dtsi => imx6ul-geam.dts} (87%)
 delete mode 100644 arch/arm/boot/dts/imx6ul-isiot-common.dtsi

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [GIT PULL 2/3] Freescale arm64 device tree updates for 4.14
  2017-08-18  7:53 [GIT PULL 1/3] i.MX device tree updates for 4.14 Shawn Guo
@ 2017-08-18  7:53 ` Shawn Guo
  2017-08-18 20:46   ` Arnd Bergmann
  2017-08-18  7:53 ` [GIT PULL 3/3] i.MX defconfig " Shawn Guo
  2017-08-18 21:01 ` [GIT PULL 1/3] i.MX device tree " Arnd Bergmann
  2 siblings, 1 reply; 6+ messages in thread
From: Shawn Guo @ 2017-08-18  7:53 UTC (permalink / raw)
  To: linux-arm-kernel

The following changes since commit 5771a8c08880cdca3bfb4a3fc6d309d6bba20877:

  Linux v4.13-rc1 (2017-07-15 15:22:10 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-4.14

for you to fetch changes up to f83de4f0088f396b63d1cf1f013a003f3f094b1b:

  arm64: dts: ls1088: Correction in Board name from "L1088A" to "LS1088A" (2017-08-14 09:39:45 +0800)

----------------------------------------------------------------
Freescale arm64 device tree updates for 4.14:
 - Correct the typo in fsl-ls1088a-rdb board name.
 - A series from Horia Geant? to consolidate aliases node and enable
   crypto support for ls208xa and ls1088a.
 - Enable USB host support for ls1012a.
 - Enable cpuidle support for ls1088a and ls208xa.

----------------------------------------------------------------
Ashish Kumar (1):
      arm64: dts: ls1088: Correction in Board name from "L1088A" to "LS1088A"

Horia Geant? (3):
      arm64: dts: freescale: ls208xa: share aliases node
      arm64: dts: freescale: ls208xa: add crypto node
      arm64: dts: freescale: ls1088a: add crypto node

Ran Wang (1):
      arm64: dts: ls1012a: add USB host controller nodes

Yuantian Tang (2):
      arm64: dts: ls1088a: add cpu idle support
      arm64: dts: ls208xa: add cpu idle support

 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi     | 17 ++++++
 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts  |  2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi     | 65 ++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts  |  5 --
 arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts  |  5 --
 arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts |  5 --
 arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi     | 17 ++++++
 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts  |  5 --
 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts  |  5 --
 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi     | 17 ++++++
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     | 51 +++++++++++++++++
 11 files changed, 168 insertions(+), 26 deletions(-)

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [GIT PULL 3/3] i.MX defconfig updates for 4.14
  2017-08-18  7:53 [GIT PULL 1/3] i.MX device tree updates for 4.14 Shawn Guo
  2017-08-18  7:53 ` [GIT PULL 2/3] Freescale arm64 " Shawn Guo
@ 2017-08-18  7:53 ` Shawn Guo
  2017-08-18 20:30   ` Arnd Bergmann
  2017-08-18 21:01 ` [GIT PULL 1/3] i.MX device tree " Arnd Bergmann
  2 siblings, 1 reply; 6+ messages in thread
From: Shawn Guo @ 2017-08-18  7:53 UTC (permalink / raw)
  To: linux-arm-kernel

The following changes since commit 5771a8c08880cdca3bfb4a3fc6d309d6bba20877:

  Linux v4.13-rc1 (2017-07-15 15:22:10 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-4.14

for you to fetch changes up to b834bc1c52b8d4b5a525eec619ad547da8bc3517:

  ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers (2017-07-25 16:42:51 +0800)

----------------------------------------------------------------
i.MX defconfig updates for 4.14:
 - Enable SPI_GPIO and GPIO_74X164 support which are useful for some
   boards like imx7d-sabresd.
 - Enable build of CODA video codec and staging video4linux drivers.

----------------------------------------------------------------
Fabio Estevam (3):
      ARM: imx_v6_v7_defconfig: Enable SPI_GPIO
      ARM: imx_v6_v7_defconfig: Enable GPIO_74X164
      ARM: imx_v6_v7_defconfig: Select the coda driver as module

Steve Longerbeam (1):
      ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers

 arch/arm/configs/imx_v6_v7_defconfig | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [GIT PULL 3/3] i.MX defconfig updates for 4.14
  2017-08-18  7:53 ` [GIT PULL 3/3] i.MX defconfig " Shawn Guo
@ 2017-08-18 20:30   ` Arnd Bergmann
  0 siblings, 0 replies; 6+ messages in thread
From: Arnd Bergmann @ 2017-08-18 20:30 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Aug 18, 2017 at 9:53 AM, Shawn Guo <shawnguo@kernel.org> wrote:
> The following changes since commit 5771a8c08880cdca3bfb4a3fc6d309d6bba20877:
>
>   Linux v4.13-rc1 (2017-07-15 15:22:10 -0700)
>
> are available in the git repository at:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-4.14
>
> for you to fetch changes up to b834bc1c52b8d4b5a525eec619ad547da8bc3517:
>
>   ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers (2017-07-25 16:42:51 +0800)
>
> ----------------------------------------------------------------
> i.MX defconfig updates for 4.14:
>  - Enable SPI_GPIO and GPIO_74X164 support which are useful for some
>    boards like imx7d-sabresd.
>  - Enable build of CODA video codec and staging video4linux drivers.

Pulled into next/defconfig, thanks!

     Arnd

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [GIT PULL 2/3] Freescale arm64 device tree updates for 4.14
  2017-08-18  7:53 ` [GIT PULL 2/3] Freescale arm64 " Shawn Guo
@ 2017-08-18 20:46   ` Arnd Bergmann
  0 siblings, 0 replies; 6+ messages in thread
From: Arnd Bergmann @ 2017-08-18 20:46 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Aug 18, 2017 at 9:53 AM, Shawn Guo <shawnguo@kernel.org> wrote:
> ----------------------------------------------------------------
> Freescale arm64 device tree updates for 4.14:
>  - Correct the typo in fsl-ls1088a-rdb board name.
>  - A series from Horia Geant? to consolidate aliases node and enable
>    crypto support for ls208xa and ls1088a.
>  - Enable USB host support for ls1012a.
>  - Enable cpuidle support for ls1088a and ls208xa.

Pulled into next/dt64, thanks!

       Arnd

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [GIT PULL 1/3] i.MX device tree updates for 4.14
  2017-08-18  7:53 [GIT PULL 1/3] i.MX device tree updates for 4.14 Shawn Guo
  2017-08-18  7:53 ` [GIT PULL 2/3] Freescale arm64 " Shawn Guo
  2017-08-18  7:53 ` [GIT PULL 3/3] i.MX defconfig " Shawn Guo
@ 2017-08-18 21:01 ` Arnd Bergmann
  2 siblings, 0 replies; 6+ messages in thread
From: Arnd Bergmann @ 2017-08-18 21:01 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Aug 18, 2017 at 9:53 AM, Shawn Guo <shawnguo@kernel.org> wrote:
>
> ----------------------------------------------------------------
> i.MX device tree updates for 4.14:
>  - A series from Andrew Lunn updating imx6-rdu2 board to enable
>    on-board Marvell switch support.
>  - A series from Jagan Teki updating imx6ul-isiot and imx6ul-geam to
>    enable audio card and FEC support.
>  - Add support for Toradex Ixora V1.1 and Apalis Evaluation Board
>    along with some cleanups.
>  - Enable DRM display support for imx6ul-evk and imx7d-sdb board.
>  - Add i.MX53 based Beckhoff CX9020 board support.
>  - Add GPMI NAND and APBH DMA devices for i.MX7 and enables NAND support
>    for imx7-colibri board.
>  - Enables the ADV7180 analog video decoder sensor connected to the
>    IMX6 IPU on various Gateworks Ventana boards.
>  - Minor updates on misc boards and some random cleanups.
>

Pulled into next/dt, thanks!

        Arnd

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2017-08-18 21:01 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-08-18  7:53 [GIT PULL 1/3] i.MX device tree updates for 4.14 Shawn Guo
2017-08-18  7:53 ` [GIT PULL 2/3] Freescale arm64 " Shawn Guo
2017-08-18 20:46   ` Arnd Bergmann
2017-08-18  7:53 ` [GIT PULL 3/3] i.MX defconfig " Shawn Guo
2017-08-18 20:30   ` Arnd Bergmann
2017-08-18 21:01 ` [GIT PULL 1/3] i.MX device tree " Arnd Bergmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).