From: sricharan@codeaurora.org (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 16/20] rpmsg: glink: Add announce_create ops and preallocate intents
Date: Thu, 24 Aug 2017 12:51:38 +0530 [thread overview]
Message-ID: <1503559302-3744-17-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1503559302-3744-1-git-send-email-sricharan@codeaurora.org>
Preallocate local intent buffers and pass the intent ids
to the remote. This way there are some default intents
available for the remote to start sending data without
having to wait by sending intent requests. Do this by
adding the rpmsg announce_create ops, which gets called
right after the rpmsg device gets probed.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/rpmsg/qcom_glink_native.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 1458bdb..76ee86e 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1002,6 +1002,25 @@ static struct rpmsg_endpoint *qcom_glink_create_ept(struct rpmsg_device *rpdev,
return ept;
}
+static int qcom_glink_announce_create(struct rpmsg_device *rpdev)
+{
+ struct glink_channel *channel = to_glink_channel(rpdev->ept);
+ struct glink_core_rx_intent *intent;
+ struct qcom_glink *glink = channel->glink;
+ int num_intents = glink->intentless ? 0 : 5;
+
+ /* Channel is now open, advertise base set of intents */
+ while (num_intents--) {
+ intent = qcom_glink_alloc_intent(glink, channel, SZ_1K, true);
+ if (!intent)
+ break;
+
+ qcom_glink_advertise_intent(glink, channel, intent);
+ }
+
+ return 0;
+}
+
static void qcom_glink_destroy_ept(struct rpmsg_endpoint *ept)
{
struct glink_channel *channel = to_glink_channel(ept);
@@ -1077,6 +1096,7 @@ static struct device_node *qcom_glink_match_channel(struct device_node *node,
static const struct rpmsg_device_ops glink_device_ops = {
.create_ept = qcom_glink_create_ept,
+ .announce_create = qcom_glink_announce_create,
};
static const struct rpmsg_endpoint_ops glink_endpoint_ops = {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2017-08-24 7:21 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-24 7:21 [PATCH v2 00/20] rpmsg: glink: Add glink smem based transport Sricharan R
2017-08-24 7:21 ` [PATCH v2 01/20] rpmsg: glink: Rename glink_rpm_xx functions to qcom_glink_xx Sricharan R
2017-08-28 11:42 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 02/20] rpmsg: glink: Associate indirections for pipe fifo accessor's Sricharan R
2017-08-28 11:44 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 03/20] rpmsg: glink: Split rpm_probe to reuse the common code Sricharan R
2017-08-28 11:44 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 04/20] rpmsg: glink: Move the common glink protocol implementation to glink_native.c Sricharan R
2017-08-28 11:45 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 05/20] rpmsg: glink: Allow unaligned data access Sricharan R
2017-08-28 11:46 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 06/20] rpmsg: glink: Return -EAGAIN when there is no FIFO space Sricharan R
2017-08-28 11:47 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 07/20] rpmsg: glink: Do a mbox_free_channel in remove Sricharan R
2017-08-28 11:47 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 08/20] rpmsg: glink: Introduce glink smem based transport Sricharan R
2017-08-28 11:48 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 09/20] rpmsg: glink: Fix default case while handling received commands Sricharan R
2017-08-28 11:48 ` Arun Kumar Neelakantam
2017-08-29 20:57 ` Bjorn Andersson
2017-08-24 7:21 ` [PATCH v2 10/20] rpmsg: glink: Add support for transport version negotiation Sricharan R
2017-08-28 11:48 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 11/20] rpmsg: glink: Fix idr_lock from mutex to spinlock Sricharan R
2017-08-28 11:49 ` Arun Kumar Neelakantam
2017-08-28 21:51 ` Chris Lew
2017-08-28 23:13 ` Sricharan R
2017-08-24 7:21 ` [PATCH v2 12/20] rpmsg: glink: Add support for TX intents Sricharan R
2017-08-28 11:49 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 13/20] rpmsg: glink: Use the local intents when receiving data Sricharan R
2017-08-28 11:49 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 14/20] rpmsg: glink: Make RX FIFO peak accessor to take an offset Sricharan R
2017-08-28 11:50 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 15/20] rpmsg: glink: Add rx done command Sricharan R
2017-08-28 11:50 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` Sricharan R [this message]
2017-08-28 11:50 ` [PATCH v2 16/20] rpmsg: glink: Add announce_create ops and preallocate intents Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 17/20] rpmsg: glink: Receive and store the remote intent buffers Sricharan R
2017-08-28 11:51 ` Arun Kumar Neelakantam
2017-08-24 7:21 ` [PATCH v2 18/20] rpmsg: glink: Use the intents passed by remote Sricharan R
2017-08-24 7:21 ` [PATCH v2 19/20] rpmsg: glink: Request for intents when unavailable Sricharan R
2017-08-24 7:21 ` [PATCH v2 20/20] rpmsg: glink: Handle remote rx done command Sricharan R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1503559302-3744-17-git-send-email-sricharan@codeaurora.org \
--to=sricharan@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).