linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: awallis@codeaurora.org (Adam Wallis)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] usb: dwc3: Initialize DMA ops/mask for xhci-hcd
Date: Fri, 25 Aug 2017 14:02:15 -0400	[thread overview]
Message-ID: <1503684135-24207-1-git-send-email-awallis@codeaurora.org> (raw)

The dma ops from the parent DWC device are not getting passed to the
child xhci-hcd device. This patch makes use of
platform_device_register_full to set the DMA ops. For the DT/OF case,
dma_ops were still null after the the device register, so
of_dma_configure is called in only the OF case.

Signed-off-by: Adam Wallis <awallis@codeaurora.org>
---
 drivers/usb/dwc3/host.c | 39 +++++++++++++++++----------------------
 1 file changed, 17 insertions(+), 22 deletions(-)

diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 76f0b0d..662e9e2 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 
 #include "core.h"
 
@@ -56,6 +57,7 @@ int dwc3_host_init(struct dwc3 *dwc)
 {
 	struct property_entry	props[3];
 	struct platform_device	*xhci;
+	struct platform_device_info dwc_plat_info = {};
 	int			ret, irq;
 	struct resource		*res;
 	struct platform_device	*dwc3_pdev = to_platform_device(dwc->dev);
@@ -79,22 +81,22 @@ int dwc3_host_init(struct dwc3 *dwc)
 	dwc->xhci_resources[1].flags = res->flags;
 	dwc->xhci_resources[1].name = res->name;
 
-	xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
-	if (!xhci) {
-		dev_err(dwc->dev, "couldn't allocate xHCI device\n");
-		return -ENOMEM;
-	}
+	dwc_plat_info.name = "xhci-hcd";
+	dwc_plat_info.parent = dwc->dev;
+	dwc_plat_info.res = dwc->xhci_resources;
+	dwc_plat_info.num_res = DWC3_XHCI_RESOURCES_NUM;
+	dwc_plat_info.fwnode = dwc->dev->fwnode;
+	dwc_plat_info.dma_mask = *dwc->dev->dma_mask;
 
-	xhci->dev.parent	= dwc->dev;
+	xhci = platform_device_register_full(&dwc_plat_info);
+	if (IS_ERR(xhci)) {
+		dev_err(dwc->dev, "failed to register xHCI device\n");
+		return PTR_ERR(xhci);
+	}
 
 	dwc->xhci = xhci;
-
-	ret = platform_device_add_resources(xhci, dwc->xhci_resources,
-						DWC3_XHCI_RESOURCES_NUM);
-	if (ret) {
-		dev_err(dwc->dev, "couldn't add resources to xHCI device\n");
-		goto err1;
-	}
+	if (dwc->dev->of_node)
+		of_dma_configure(&xhci->dev, dwc->dev->of_node);
 
 	memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
 
@@ -117,7 +119,7 @@ int dwc3_host_init(struct dwc3 *dwc)
 		ret = platform_device_add_properties(xhci, props);
 		if (ret) {
 			dev_err(dwc->dev, "failed to add properties to xHCI\n");
-			goto err1;
+			goto err;
 		}
 	}
 
@@ -126,19 +128,12 @@ int dwc3_host_init(struct dwc3 *dwc)
 	phy_create_lookup(dwc->usb3_generic_phy, "usb3-phy",
 			  dev_name(dwc->dev));
 
-	ret = platform_device_add(xhci);
-	if (ret) {
-		dev_err(dwc->dev, "failed to register xHCI device\n");
-		goto err2;
-	}
-
 	return 0;
-err2:
+err:
 	phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
 			  dev_name(dwc->dev));
 	phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
 			  dev_name(dwc->dev));
-err1:
 	platform_device_put(xhci);
 	return ret;
 }
-- 
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

             reply	other threads:[~2017-08-25 18:02 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-25 18:02 Adam Wallis [this message]
2017-08-25 23:03 ` [PATCH] usb: dwc3: Initialize DMA ops/mask for xhci-hcd Grygorii Strashko
2017-08-28 15:31   ` Adam Wallis
2017-08-28 13:05 ` Felipe Balbi
2017-08-28 15:29   ` Adam Wallis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1503684135-24207-1-git-send-email-awallis@codeaurora.org \
    --to=awallis@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).