From: chris.paterson2@renesas.com (Chris Paterson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/8] ARM: dts: iwg22m: Enable SDHI1 controller
Date: Wed, 13 Sep 2017 18:05:36 +0100 [thread overview]
Message-ID: <1505322341-9480-4-git-send-email-chris.paterson2@renesas.com> (raw)
In-Reply-To: <1505322341-9480-1-git-send-email-chris.paterson2@renesas.com>
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Enable the SDHI1 controller on iWave RZ/G1E SoM.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
---
This patch is based on renesas-devel-20170913-v4.13.
arch/arm/boot/dts/r8a7745-iwg22m.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
index e306e7c..f7f9cef 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
+++ b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
@@ -9,6 +9,7 @@
*/
#include "r8a7745.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "iwave,g22m", "renesas,r8a7745";
@@ -38,6 +39,12 @@
function = "mmc";
};
+ sdhi1_pins: sd1 {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <3300>;
+ };
+
i2c3_pins: i2c3 {
groups = "i2c3_b";
function = "i2c3";
@@ -54,6 +61,16 @@
status = "okay";
};
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ cd-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&i2c3 {
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
--
1.9.1
next prev parent reply other threads:[~2017-09-13 17:05 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-13 17:05 [PATCH 0/8] ARM: renesas: Latest r8a774[35] dts updates Chris Paterson
2017-09-13 17:05 ` [PATCH 1/8] ARM: dts: r8a7745: Add APMU node and second CPU core Chris Paterson
2017-09-15 7:45 ` Simon Horman
2017-09-15 8:05 ` Geert Uytterhoeven
2017-09-15 8:57 ` Fabrizio Castro
2017-09-15 11:06 ` Simon Horman
2017-12-06 10:30 ` Geert Uytterhoeven
2017-12-06 11:21 ` Fabrizio Castro
2017-12-06 11:59 ` Fabrizio Castro
2017-09-19 15:03 ` Geert Uytterhoeven
2017-09-13 17:05 ` [PATCH 2/8] ARM: dts: r8a7745: Add SDHI controllers Chris Paterson
2017-09-15 7:54 ` Simon Horman
2017-09-15 15:39 ` Chris Paterson
2017-09-13 17:05 ` Chris Paterson [this message]
2017-09-15 8:11 ` [PATCH 3/8] ARM: dts: iwg22m: Enable SDHI1 controller Simon Horman
2017-09-20 11:16 ` Geert Uytterhoeven
2017-09-20 13:05 ` Chris Paterson
2017-09-21 8:31 ` Simon Horman
2017-09-21 8:38 ` Simon Horman
2017-09-20 13:06 ` Chris Paterson
2017-09-21 8:37 ` Simon Horman
2017-09-13 17:05 ` [PATCH 4/8] ARM: dts: iwg22d: Enable SDHI0 controller Chris Paterson
2017-09-15 8:05 ` Simon Horman
2017-09-18 16:26 ` Fabrizio Castro
2017-09-20 17:17 ` Fabrizio Castro
2017-09-20 11:40 ` Geert Uytterhoeven
2017-09-21 8:38 ` Simon Horman
2017-09-21 8:42 ` Simon Horman
2017-09-21 8:53 ` Fabrizio Castro
2017-09-21 9:03 ` Simon Horman
2017-09-22 6:52 ` Chris Paterson
2017-09-22 13:01 ` [PATCH v2] " Fabrizio Castro
2017-09-22 13:33 ` Fabrizio Castro
2017-09-25 7:18 ` Simon Horman
2017-09-25 7:25 ` Chris Paterson
2017-09-22 14:21 ` Geert Uytterhoeven
2017-09-13 17:05 ` [PATCH 5/8] ARM: dts: r8a7743: Add QSPI support Chris Paterson
2017-09-19 15:09 ` Geert Uytterhoeven
2017-09-21 8:39 ` Simon Horman
2017-09-13 17:05 ` [PATCH 6/8] ARM: dts: iwg20m: Add SPI NOR support Chris Paterson
2017-09-15 8:35 ` Simon Horman
2017-09-15 15:12 ` Chris Paterson
2017-09-21 8:41 ` Simon Horman
2017-09-20 11:10 ` Geert Uytterhoeven
2017-09-13 17:05 ` [PATCH 7/8] ARM: dts: r8a7745: Add QSPI support Chris Paterson
2017-09-19 15:10 ` Geert Uytterhoeven
2017-09-21 8:45 ` Simon Horman
2017-09-13 17:05 ` [PATCH 8/8] ARM: drs: iwg22m: Add SPI NOR support Chris Paterson
2017-09-14 7:07 ` Biju Das
2017-09-20 11:10 ` Geert Uytterhoeven
2017-09-21 8:47 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1505322341-9480-4-git-send-email-chris.paterson2@renesas.com \
--to=chris.paterson2@renesas.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).