From mboxrd@z Thu Jan 1 00:00:00 1970 From: razvan.stefanescu@nxp.com (Razvan Stefanescu) Date: Tue, 19 Sep 2017 12:01:38 +0300 Subject: [PATCH 6/6] staging: fsl-dpaa2/ethsw: Add TODO In-Reply-To: <1505811698-7338-1-git-send-email-razvan.stefanescu@nxp.com> References: <1505811698-7338-1-git-send-email-razvan.stefanescu@nxp.com> Message-ID: <1505811698-7338-7-git-send-email-razvan.stefanescu@nxp.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add a TODO file describing what needs to be added/changed before the driver can be moved out of staging. Signed-off-by: Razvan Stefanescu --- drivers/staging/fsl-dpaa2/ethsw/TODO | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 drivers/staging/fsl-dpaa2/ethsw/TODO diff --git a/drivers/staging/fsl-dpaa2/ethsw/TODO b/drivers/staging/fsl-dpaa2/ethsw/TODO new file mode 100644 index 0000000..d3f12c3 --- /dev/null +++ b/drivers/staging/fsl-dpaa2/ethsw/TODO @@ -0,0 +1,14 @@ +* Add I/O capabilities on switch port netdevices. This will allow control +traffic to reach the CPU. +* Add ACL to redirect control traffic to CPU. +* Add support for displaying learned FDB entries +* MC firmware uprev; the DPAA2 objects used by the Ethernet Switch driver +need to be kept in sync with binary interface changes in MC +* refine README file +* cleanup + +NOTE: At least first three of the above are required before getting the +DPAA2 Ethernet Switch driver out of staging. Another requirement is that +the fsl-mc bus driver is moved to drivers/bus and dpio driver is moved to +drivers/soc (this is required for I/O). + -- 1.9.1