From mboxrd@z Thu Jan 1 00:00:00 1970 From: fabio.estevam@nxp.com (Fabio Estevam) Date: Wed, 20 Sep 2017 10:56:08 -0300 Subject: [PATCH 1/3] ARM: dts: imx6qdl-sabresd: Use the 'vpcie-supply' property Message-ID: <1505915770-17136-1-git-send-email-fabio.estevam@nxp.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Since commit c26ebe98a103 ("PCI: imx6: Add regulator support"), it is possible to pass the 'vpcie-supply' property to describe the PCIE supply. This way we can remove the 'regulator-always-on' property from the regulator and have a better device tree description. Signed-off-by: Fabio Estevam --- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index b72b6fa..77f7b12 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -67,7 +67,6 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 19 0>; - regulator-always-on; enable-active-high; }; }; @@ -651,6 +650,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; status = "okay"; }; -- 2.7.4