From: vviswana@codeaurora.org (Vijay Viswanath)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/4] mmc: sdhci-msm: Corrections to implementation of power irq
Date: Wed, 27 Sep 2017 11:04:39 +0530 [thread overview]
Message-ID: <1506490483-46871-1-git-send-email-vviswana@codeaurora.org> (raw)
Register writes which change voltage of IO lines or turn the IO bus on/off
require sdhc controller to be ready before progressing further. Once a
register write which affects IO lines is done, the driver should wait for
power irq from controller. Once the irq comes, the driver should acknowledge
the irq by writing to power control register. If the acknowledgement is not
given to controller, the controller may not complete the corresponding
register write action and this can mess up the controller if drivers proceeds
without power irq completing.
Changes since v1:
Patch enabling MMC_IO_ACCESSORS in Kconfig moved up the patch list.
Also corrected a mistake in the patch.
Removed all ifdef CONFIG_MMC_IO_ACCESSORS since the patches using it
will come after MMC_IO_ACCESSORS are enabled.
Merged the patches 3 & 4 of earlier series into 1 patch (patch 4 in
current series).
Corrected a mistake in a comment text in patch 3 of previous series.
Changes since RFC:
wait_for_completion_timeout replaced with wait_event_timeout when
waiting for power irq.
Removed the spinlock within power irq handler and API which waits
for power irq.
Added comments to sdhci msm register write functions, warning that they
can sleep.
Sdhci msm register write functions will do a memory barrier before
writing to the register if the particular register can trigger
power irq.
Instead of enabling SDHCI IO ACCESSORS config in arm64/defconfig, it
will be selected in mmc/host/Kconfig if the platform is MMC_SDHCI_MSM.
Sahitya Tummala (1):
mmc: sdhci-msm: Fix HW issue with power IRQ handling during reset
Subhash Jadavani (1):
mmc: sdhci-msm: fix issue with power irq
Vijay Viswanath (2):
mmc: Kconfig: Enable CONFIG_MMC_SDHCI_IO_ACCESSORS
mmc: sdhci-msm: Add sdhci msm register write APIs which wait for pwr
irq
drivers/mmc/host/Kconfig | 1 +
drivers/mmc/host/sdhci-msm.c | 235 ++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 231 insertions(+), 5 deletions(-)
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
next reply other threads:[~2017-09-27 5:34 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-27 5:34 Vijay Viswanath [this message]
2017-09-27 5:34 ` [PATCH v2 1/4] mmc: sdhci-msm: fix issue with power irq Vijay Viswanath
2017-10-03 11:44 ` Adrian Hunter
2017-09-27 5:34 ` [PATCH v2 2/4] mmc: sdhci-msm: Fix HW issue with power IRQ handling during reset Vijay Viswanath
2017-10-03 11:44 ` Adrian Hunter
2017-09-27 5:34 ` [PATCH v2 3/4] mmc: Kconfig: Enable CONFIG_MMC_SDHCI_IO_ACCESSORS Vijay Viswanath
2017-10-03 11:44 ` Adrian Hunter
2017-09-27 5:34 ` [PATCH v2 4/4] mmc: sdhci-msm: Add sdhci msm register write APIs which wait for pwr irq Vijay Viswanath
2017-10-03 11:44 ` Adrian Hunter
2017-10-14 7:31 ` Bjorn Andersson
2017-10-20 10:54 ` Vijay Viswanath
2017-10-20 18:05 ` Bjorn Andersson
2018-05-29 12:19 ` Georgi Djakov
2018-05-30 7:11 ` Vijay Viswanath
2018-05-30 15:57 ` Georgi Djakov
2017-10-04 8:59 ` [PATCH v2 0/4] mmc: sdhci-msm: Corrections to implementation of power irq Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1506490483-46871-1-git-send-email-vviswana@codeaurora.org \
--to=vviswana@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).