From mboxrd@z Thu Jan 1 00:00:00 1970 From: m.purski@samsung.com (Maciej Purski) Date: Thu, 28 Sep 2017 14:50:15 +0200 Subject: [PATCH 4/4] ARM: dts: Add max-expected-current properties for ina231 in Odroid XU3 In-Reply-To: <1506603015-27202-1-git-send-email-m.purski@samsung.com> References: <1506603015-27202-1-git-send-email-m.purski@samsung.com> Message-ID: <1506603015-27202-5-git-send-email-m.purski@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Set max-expected-current to values required by the documentation, in order to achieve desired precision. Signed-off-by: Maciej Purski --- arch/arm/boot/dts/exynos5422-odroidxu3.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index 9ed6564..aa19374 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -28,6 +28,7 @@ compatible = "ti,ina231"; reg = <0x40>; shunt-resistor = <10000>; + max-expected-current = <9000>; }; /* memory: VDD_MEM */ @@ -35,6 +36,7 @@ compatible = "ti,ina231"; reg = <0x41>; shunt-resistor = <10000>; + max-expected-current = <3000>; }; /* GPU: VDD_G3D */ @@ -42,6 +44,7 @@ compatible = "ti,ina231"; reg = <0x44>; shunt-resistor = <10000>; + max-expected-current = <5000>; }; /* A7 cluster: VDD_KFC */ @@ -49,6 +52,7 @@ compatible = "ti,ina231"; reg = <0x45>; shunt-resistor = <10000>; + max-expected-current = <2000>; }; }; -- 2.7.4