linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: ulrich.hecht+renesas@gmail.com (Ulrich Hecht)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 05/11] drm/bridge: Analogix ANX7688 HDMI -> DP bridge driver
Date: Fri, 29 Sep 2017 15:09:07 +0200	[thread overview]
Message-ID: <1506690553-27357-6-git-send-email-ulrich.hecht+renesas@gmail.com> (raw)
In-Reply-To: <1506690553-27357-1-git-send-email-ulrich.hecht+renesas@gmail.com>

Ported from chromeos-3.18.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
 drivers/gpu/drm/bridge/Kconfig            |   9 ++
 drivers/gpu/drm/bridge/Makefile           |   1 +
 drivers/gpu/drm/bridge/analogix-anx7688.c | 233 ++++++++++++++++++++++++++++++
 3 files changed, 243 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/analogix-anx7688.c

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index a1c0d95..712ac0a 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -38,6 +38,15 @@ config DRM_PARADE_PS8640
 	  The PS8640 is a high-performance and low-power
 	  MIPI DSI to eDP converter
 
+config DRM_ANALOGIX_ANX7688
+	tristate "Analogix ANX7688 bridge"
+	depends on DRM
+	select DRM_KMS_HELPER
+	---help---
+	  ANX7688 is a transmitter to support DisplayPort over USB-C for
+	  smartphone and tablets.
+	  This driver only supports the HDMI to DP component of the chip.
+
 config DRM_ANALOGIX_ANX78XX
 	tristate "Analogix ANX78XX bridge"
 	select DRM_KMS_HELPER
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 6be8a9d..9cbf788 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -1,6 +1,7 @@
 ccflags-y := -Iinclude/drm
 
 obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o
+obj-$(CONFIG_DRM_ANALOGIX_ANX7688) += analogix-anx7688.o
 obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
 obj-$(CONFIG_DRM_GENERIC_GPIO_MUX) += generic-gpio-mux.o
 obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o
diff --git a/drivers/gpu/drm/bridge/analogix-anx7688.c b/drivers/gpu/drm/bridge/analogix-anx7688.c
new file mode 100644
index 0000000..cc995c8
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix-anx7688.c
@@ -0,0 +1,233 @@
+/*
+ * ANX7688 HDMI->DP bridge driver
+ *
+ * Copyright (C) 2016 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <drm/drm_crtc.h>
+
+/* Register addresses */
+#define VENDOR_ID_REG 0x00
+#define DEVICE_ID_REG 0x02
+
+#define FW_VERSION_REG 0x80
+
+#define DP_BANDWIDTH_REG 0x85
+#define DP_LANE_COUNT_REG 0x86
+
+#define VENDOR_ID 0x1f29
+#define DEVICE_ID 0x7688
+
+/* First supported firmware version (0.85) */
+#define MINIMUM_FW_VERSION 0x0085
+
+struct anx7688 {
+	struct drm_bridge bridge;
+	struct i2c_client *client;
+
+	bool filter;
+};
+
+static int anx7688_read(struct i2c_client *client, u8 reg, u8 *data,
+			u16 data_len)
+{
+	int ret;
+	struct i2c_msg msgs[] = {
+		{
+		 .addr = client->addr,
+		 .flags = 0,
+		 .len = 1,
+		 .buf = &reg,
+		 },
+		{
+		 .addr = client->addr,
+		 .flags = I2C_M_RD,
+		 .len = data_len,
+		 .buf = data,
+		 }
+	};
+
+	ret = i2c_transfer(client->adapter, msgs, 2);
+
+	if (ret == 2)
+		return 0;
+	if (ret < 0)
+		return ret;
+	else
+		return -EIO;
+}
+
+static inline struct anx7688 *bridge_to_anx7688(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct anx7688, bridge);
+}
+
+static bool anx7688_bridge_mode_fixup(struct drm_bridge *bridge,
+				      const struct drm_display_mode *mode,
+				      struct drm_display_mode *adjusted_mode)
+{
+	struct anx7688 *anx7688 = bridge_to_anx7688(bridge);
+	u8 regs[2];
+	u8 dpbw, lanecount;
+	int totalbw, requiredbw;
+	int ret;
+
+	if (!anx7688->filter)
+		return true;
+
+	/* Read both regs 0x85 (bandwidth) and 0x86 (lane count). */
+	ret = anx7688_read(anx7688->client, DP_BANDWIDTH_REG, regs, 2);
+	if (ret < 0) {
+		dev_err(&anx7688->client->dev,
+			"Failed to read bandwidth/lane count\n");
+		return false;
+	}
+	dpbw = regs[0];
+	lanecount = regs[1];
+
+	/* Maximum 0x19 bandwidth (6.75 Gbps Turbo mode), 2 lanes */
+	if (dpbw > 0x19 || lanecount > 2) {
+		dev_err(&anx7688->client->dev,
+			"Invalid bandwidth/lane count (%02x/%d)\n",
+			dpbw, lanecount);
+		return false;
+	}
+
+	/* Compute available bandwidth (kHz) */
+	totalbw = dpbw * lanecount * 270000 * 8 / 10;
+
+	/* Required bandwidth (8 bpc, kHz) */
+	requiredbw = mode->clock * 8 * 3;
+
+	dev_dbg(&anx7688->client->dev,
+		"DP bandwidth: %d kHz (%02x/%d); mode requires %d Khz\n",
+		totalbw, dpbw, lanecount, requiredbw);
+
+	if (totalbw == 0) {
+		dev_warn(&anx7688->client->dev,
+			 "Bandwidth/lane count are 0, not rejecting modes\n");
+		return true;
+	}
+
+	return totalbw >= requiredbw;
+}
+
+static const struct drm_bridge_funcs anx7688_bridge_funcs = {
+	.mode_fixup	= anx7688_bridge_mode_fixup,
+};
+
+static int anx7688_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct anx7688 *anx7688;
+	int ret;
+	u8 buffer[4];
+	u16 vendor, device, fwversion;
+
+	anx7688 = devm_kzalloc(&client->dev, sizeof(*anx7688), GFP_KERNEL);
+	if (!anx7688)
+		return -ENOMEM;
+
+#if IS_ENABLED(CONFIG_OF)
+	anx7688->bridge.of_node = client->dev.of_node;
+#endif
+
+	anx7688->client = client;
+	i2c_set_clientdata(client, anx7688);
+
+	/* Read both vendor and device id (4 bytes). */
+	ret = anx7688_read(client, VENDOR_ID_REG, buffer, 4);
+	if (ret) {
+		dev_err(&client->dev, "Failed to read chip vendor/device id\n");
+		return ret;
+	}
+
+	vendor = (u16)buffer[1] << 8 | buffer[0];
+	device = (u16)buffer[3] << 8 | buffer[2];
+	if (vendor != VENDOR_ID || device != DEVICE_ID) {
+		dev_err(&client->dev,
+			"Invalid vendor/device id %04x/%04x\n",
+			vendor, device);
+		return -ENODEV;
+	}
+
+	ret = anx7688_read(client, FW_VERSION_REG, buffer, 2);
+	if (ret) {
+		dev_err(&client->dev, "Failed to read firmware version\n");
+		return ret;
+	}
+
+	fwversion = (u16)buffer[0] << 8 | buffer[1];
+	dev_info(&client->dev, "ANX7688 firwmare version %02x.%02x\n",
+		 buffer[0], buffer[1]);
+
+	/* FW version >= 0.85 supports bandwidth/lane count registers */
+	if (fwversion >= MINIMUM_FW_VERSION) {
+		anx7688->filter = true;
+	} else {
+		/* Warn, but not fail, for backwards compatibility. */
+		dev_warn(&client->dev,
+			 "Old ANX7688 FW version (%02x.%02x), not filtering\n",
+			 buffer[0], buffer[1]);
+	}
+
+	anx7688->bridge.funcs = &anx7688_bridge_funcs;
+	ret = drm_bridge_add(&anx7688->bridge);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to add drm bridge\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int anx7688_i2c_remove(struct i2c_client *client)
+{
+	struct anx7688 *anx7688 = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&anx7688->bridge);
+
+	return 0;
+}
+
+static const struct i2c_device_id anx7688_id[] = {
+	{ "anx7688", 0 },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(i2c, anx7688_id);
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id anx7688_match_table[] = {
+	{ .compatible = "analogix,anx7688", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, anx7688_match_table);
+#endif
+
+static struct i2c_driver anx7688_driver = {
+	.driver = {
+		   .name = "anx7688",
+		   .of_match_table = of_match_ptr(anx7688_match_table),
+		  },
+	.probe = anx7688_i2c_probe,
+	.remove = anx7688_i2c_remove,
+	.id_table = anx7688_id,
+};
+
+module_i2c_driver(anx7688_driver);
+
+MODULE_DESCRIPTION("ANX7688 SlimPort Transmitter driver");
+MODULE_AUTHOR("Nicolas Boichat <drinkcat@chromium.org>");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

  parent reply	other threads:[~2017-09-29 13:09 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-29 13:09 [RFC 00/11] Acer Chromebook R13 support Ulrich Hecht
2017-09-29 13:09 ` [RFC 01/11] soc: mediatek: MediaTek Command Queue (CMDQ) driver Ulrich Hecht
2017-10-02 10:24   ` CK Hu
2017-09-29 13:09 ` [RFC 02/11] drm/bridge: GPIO-controlled display multiplexer driver Ulrich Hecht
2017-09-29 13:09 ` [RFC 03/11] platform/chrome: ChromeOS firmware interface driver Ulrich Hecht
2017-09-29 13:09 ` [RFC 04/11] drm/bridge: Parade PS8640 MIPI DSI -> eDP converter driver Ulrich Hecht
2017-09-29 13:09 ` Ulrich Hecht [this message]
2017-09-29 13:09 ` [RFC 06/11] arm64: dts: mediatek: Add Elm Rev. 3 device tree Ulrich Hecht
2017-10-18  8:49   ` Yingjoe Chen
2018-05-01  8:00     ` Paul Kocialkowski
2017-09-29 13:09 ` [RFC 07/11] hack: mediatek: get mmsys to register as both DRM and clock device Ulrich Hecht
2017-09-29 13:09 ` [RFC 08/11] hack: drm/mediatek: roll back drm_of_find_panel_or_bridge() use Ulrich Hecht
2017-09-29 13:09 ` [RFC 09/11] drm/mediatek: add fbdev support Ulrich Hecht
2017-10-03  5:38   ` CK Hu
2017-09-29 13:09 ` [RFC 10/11] hack: mtk-sd: use old driver from vendor kernel Ulrich Hecht
2017-09-29 13:09 ` [RFC 11/11] hack: Revert "iommu/io-pgtable: Sanitise map/unmap addresses" Ulrich Hecht
2017-10-02  9:50   ` Robin Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1506690553-27357-6-git-send-email-ulrich.hecht+renesas@gmail.com \
    --to=ulrich.hecht+renesas@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).