From mboxrd@z Thu Jan 1 00:00:00 1970 From: marco.franchi@nxp.com (Marco Franchi) Date: Mon, 16 Oct 2017 10:48:30 -0200 Subject: [PATCH 6/6] ARM: dts: imx53-tx53: Fix 'ethernet-phy@0' node with unit name and no reg property In-Reply-To: <1508158110-5188-1-git-send-email-marco.franchi@nxp.com> References: <1508158110-5188-1-git-send-email-marco.franchi@nxp.com> Message-ID: <1508158110-5188-6-git-send-email-marco.franchi@nxp.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following build warning is seen with W=1: Warning (unit_address_vs_reg): Node /soc/aips at 60000000/ethernet at 63fec000/ ethernet-phy at 0 has a unit name, but no reg property Fix this warning by removing '@' from such node. Signed-off-by: Marco Franchi --- arch/arm/boot/dts/imx53-tx53.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 7807c1f..27a1aee 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -206,7 +206,7 @@ mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */ status = "okay"; - phy0: ethernet-phy at 0 { + phy0: ethernet-phy { interrupt-parent = <&gpio2>; interrupts = <4>; device_type = "ethernet-phy"; -- 2.7.4