[PATCH 1/2] PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7

[PATCH 1/2] PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7

[Trent Piepho]

The IMX6 PCI-e host driver also supports the IMX7d.  However, the
Kconfig dependencies of the driver prevented it from being enabled
unless the kernel was built with both IMX6 and IMX7 support.  It works
fine to build with only IMX7 support enabled.

Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
CC: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
---
 drivers/pci/dwc/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
index 22ec82fcdea2..85cf392921a9 100644
--- a/drivers/pci/dwc/Kconfig
+++ b/drivers/pci/dwc/Kconfig
@@ -71,9 +71,9 @@ config PCI_EXYNOS
 	select PCIE_DW_HOST
 
 config PCI_IMX6
-	bool "Freescale i.MX6 PCIe controller"
+	bool "Freescale i.MX6/7 PCIe controller"
 	depends on PCI
-	depends on SOC_IMX6Q
+	depends on SOC_IMX6Q || SOC_IMX7D
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
 	select PCIE_DW_HOST
-- 
2.13.6

[PATCH 2/2] PCI: imx6: Check for link training status in link up check

[Trent Piepho]

This fixes a regression introduced in merge 562df5c8521e.

Prior to this the link up check done by imx6_pcie_wait_for_link()
consisted of a polling loop on imx6_pcie_link_up() (via the former
calling dw_pcie_link_up() which called the latter as callback), and
imx6_pcie_link_up() polled the link status register checking for link
up *and link not still training*.

This was a polling loop inside another polling loop.  And the outermost
loop was duplicated with minor variations in a number of other dwc based
host drivers.

This was addressed in two commits.  Commit 4d107d3b5a68 ("PCI: imx6: Move
link up check into imx6_pcie_wait_for_link()"), changed
imx6_pcie_wait_for_link() to poll the link status register directly,
checking for link up and not training, and made imx6_pcie_link_up() only
check the link up bit (once, not a polling loop).

While commit commit 886bc5ceb5cc ("PCI: designware: Add generic
dw_pcie_wait_for_link()"), replaced the loop in imx6_pcie_wait_for_link()
with a call to a new dwc core function, which polled imx6_pcie_link_up(),
which still checked both link up and not training in a loop.

When these two commits were merged, the version of
imx6_pcie_wait_for_link() from '886 was kept, which eliminated the link
training check placed there by '4d1.  But the version of
imx6_pcie_link_up() from '4d1 was kept, which eliminated the link training
check that had been there and was moved to imx6_pcie_wait_for_link().

There result is no link training check.

Then commit dac29e6c5460 ("PCI: designware: Add default link up check if
sub-driver doesn't override") added a link training check to the default
version of dw_pcie_link_up(), but since imx6 uses imx6_pcie_link_up() it
does not use the default version with this fix.

This commit eliminates imx6_pcie_link_up() so that the default
dw_pcie_link_up() is used.  The default has the correct code and is what
the imx6 driver used to do.

Fixes: 562df5c8521e1371f3cbd0b7b868034da376d714
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
---
 drivers/pci/dwc/pci-imx6.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/pci/dwc/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c
index b73483534a5b..1f1069b70e45 100644
--- a/drivers/pci/dwc/pci-imx6.c
+++ b/drivers/pci/dwc/pci-imx6.c
@@ -83,8 +83,6 @@ struct imx6_pcie {
 #define PCIE_PL_PFLR_FORCE_LINK			(1 << 15)
 #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
 #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
-#define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING	(1 << 29)
-#define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP		(1 << 4)
 
 #define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
 #define PCIE_PHY_CTRL_DATA_LOC 0
@@ -653,12 +651,6 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
 	return 0;
 }
 
-static int imx6_pcie_link_up(struct dw_pcie *pci)
-{
-	return dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1) &
-			PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
-}
-
 static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
 	.host_init = imx6_pcie_host_init,
 };
@@ -701,7 +693,7 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
 }
 
 static const struct dw_pcie_ops dw_pcie_ops = {
-	.link_up = imx6_pcie_link_up,
+	/* No special ops needed, but pcie-designware still expects this struct */
 };
 
 static int imx6_pcie_probe(struct platform_device *pdev)
-- 
2.13.6

[PATCH 2/2] PCI: imx6: Check for link training status in link up check

[Lucas Stach]

Am Montag, den 16.10.2017, 17:11 -0700 schrieb Trent Piepho:
> This fixes a regression introduced in merge 562df5c8521e.
> 
> Prior to this the link up check done by imx6_pcie_wait_for_link()
> consisted of a polling loop on imx6_pcie_link_up() (via the former
> calling dw_pcie_link_up() which called the latter as callback), and
> imx6_pcie_link_up() polled the link status register checking for link
> up *and link not still training*.
> 
> This was a polling loop inside another polling loop.??And the outermost
> loop was duplicated with minor variations in a number of other dwc based
> host drivers.
> 
> This was addressed in two commits.??Commit 4d107d3b5a68 ("PCI: imx6: Move
> link up check into imx6_pcie_wait_for_link()"), changed
> imx6_pcie_wait_for_link() to poll the link status register directly,
> checking for link up and not training, and made imx6_pcie_link_up() only
> check the link up bit (once, not a polling loop).
> 
> While commit commit 886bc5ceb5cc ("PCI: designware: Add generic
> dw_pcie_wait_for_link()"), replaced the loop in imx6_pcie_wait_for_link()
> with a call to a new dwc core function, which polled imx6_pcie_link_up(),
> which still checked both link up and not training in a loop.
> 
> When these two commits were merged, the version of
> imx6_pcie_wait_for_link() from '886 was kept, which eliminated the link
> training check placed there by '4d1.??But the version of
> imx6_pcie_link_up() from '4d1 was kept, which eliminated the link training
> check that had been there and was moved to imx6_pcie_wait_for_link().
> 
> There result is no link training check.
> 
> Then commit dac29e6c5460 ("PCI: designware: Add default link up check if
> sub-driver doesn't override")

I think you meant 01c076732e82 (PCI: designware: Check LTSSM training
bit before deciding link is up) here.

>  added a link training check to the default
> version of dw_pcie_link_up(), but since imx6 uses imx6_pcie_link_up() it
> does not use the default version with this fix.
> 
> This commit eliminates imx6_pcie_link_up() so that the default
> dw_pcie_link_up() is used.??The default has the correct code and is what
> the imx6 driver used to do.
> 
> Fixes: 562df5c8521e1371f3cbd0b7b868034da376d714
> > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > Cc: Joao Pinto <Joao.Pinto@synopsys.com>
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> Signed-off-by: Trent Piepho <tpiepho@impinj.com>

With the commit message fixed:

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
> ?drivers/pci/dwc/pci-imx6.c | 10 +---------
> ?1 file changed, 1 insertion(+), 9 deletions(-)
> 
> diff --git a/drivers/pci/dwc/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c
> index b73483534a5b..1f1069b70e45 100644
> --- a/drivers/pci/dwc/pci-imx6.c
> +++ b/drivers/pci/dwc/pci-imx6.c
> @@ -83,8 +83,6 @@ struct imx6_pcie {
> > ?#define PCIE_PL_PFLR_FORCE_LINK			(1 << 15)
> ?#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
> ?#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
> > -#define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING	(1 << 29)
> > -#define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP		(1 << 4)
> ?
> ?#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
> ?#define PCIE_PHY_CTRL_DATA_LOC 0
> @@ -653,12 +651,6 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
> > ?	return 0;
> ?}
> ?
> -static int imx6_pcie_link_up(struct dw_pcie *pci)
> -{
> > -	return dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1) &
> > -			PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
> -}
> -
> ?static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
> > ?	.host_init = imx6_pcie_host_init,
> ?};
> @@ -701,7 +693,7 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
> ?}
> ?
> ?static const struct dw_pcie_ops dw_pcie_ops = {
> > -	.link_up = imx6_pcie_link_up,
> > +	/* No special ops needed, but pcie-designware still expects this struct */
> ?};
> ?
> ?static int imx6_pcie_probe(struct platform_device *pdev)

[PATCH 2/2] PCI: imx6: Check for link training status in link up check

[Trent Piepho]

On Tue, 2017-10-17 at 10:44 +0200, Lucas Stach wrote:
> Am Montag, den 16.10.2017, 17:11 -0700 schrieb Trent Piepho:
> > 
> > 
> > There result is no link training check.
> > 
> > Then commit dac29e6c5460 ("PCI: designware: Add default link up check if
> > sub-driver doesn't override")
> 
> I think you meant 01c076732e82 (PCI: designware: Check LTSSM training
> bit before deciding link is up) here.
> 
> >  added a link training check to the default
> > version of dw_pcie_link_up(), but since imx6 uses imx6_pcie_link_up() it
> > does not use the default version with this fix.

It was really the combination of both commits.  'dac added the common
link up check, which imx6 didn't use, and then '01c added the training
check to it.  It appears I've attributed both changes to 'dac in my
message and forgot '01c.  I'll fix.

[PATCH 1/2] PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7

[Lucas Stach]

Am Montag, den 16.10.2017, 17:11 -0700 schrieb Trent Piepho:
> The IMX6 PCI-e host driver also supports the IMX7d.??However, the
> Kconfig dependencies of the driver prevented it from being enabled
> unless the kernel was built with both IMX6 and IMX7 support.??It
> works
> fine to build with only IMX7 support enabled.
> 
> Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Richard Zhu <hongxing.zhu@nxp.com>
> CC: Lucas Stach <l.stach@pengutronix.de>
> Signed-off-by: Trent Piepho <tpiepho@impinj.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
> ?drivers/pci/dwc/Kconfig | 4 ++--
> ?1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
> index 22ec82fcdea2..85cf392921a9 100644
> --- a/drivers/pci/dwc/Kconfig
> +++ b/drivers/pci/dwc/Kconfig
> @@ -71,9 +71,9 @@ config PCI_EXYNOS
> ?	select PCIE_DW_HOST
> ?
> ?config PCI_IMX6
> -	bool "Freescale i.MX6 PCIe controller"
> +	bool "Freescale i.MX6/7 PCIe controller"
> ?	depends on PCI
> -	depends on SOC_IMX6Q
> +	depends on SOC_IMX6Q || SOC_IMX7D
> ?	depends on PCI_MSI_IRQ_DOMAIN
> ?	select PCIEPORTBUS
> ?	select PCIE_DW_HOST