From: benjamin.gaignard@linaro.org (Benjamin Gaignard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 4/4] arm: dts: stm32: remove useless clocksource nodes
Date: Wed, 18 Oct 2017 09:43:34 +0200 [thread overview]
Message-ID: <1508312614-27750-5-git-send-email-benjamin.gaignard@linaro.org> (raw)
In-Reply-To: <1508312614-27750-1-git-send-email-benjamin.gaignard@linaro.org>
16 bits timers aren't accurate enough to be used as
clocksource, remove them from stm32f4 and stm32f7 devicetree.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
---
arch/arm/boot/dts/stm32f429.dtsi | 32 --------------------------------
arch/arm/boot/dts/stm32f746.dtsi | 32 --------------------------------
2 files changed, 64 deletions(-)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index dd7e99b..ac9a3e6 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -108,14 +108,6 @@
};
};
- timer3: timer at 40000400 {
- compatible = "st,stm32-timer";
- reg = <0x40000400 0x400>;
- interrupts = <29>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
- status = "disabled";
- };
-
timers3: timers at 40000400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -137,14 +129,6 @@
};
};
- timer4: timer at 40000800 {
- compatible = "st,stm32-timer";
- reg = <0x40000800 0x400>;
- interrupts = <30>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
- status = "disabled";
- };
-
timers4: timers at 40000800 {
#address-cells = <1>;
#size-cells = <0>;
@@ -194,14 +178,6 @@
};
};
- timer6: timer at 40001000 {
- compatible = "st,stm32-timer";
- reg = <0x40001000 0x400>;
- interrupts = <54>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
- status = "disabled";
- };
-
timers6: timers at 40001000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -218,14 +194,6 @@
};
};
- timer7: timer at 40001400 {
- compatible = "st,stm32-timer";
- reg = <0x40001400 0x400>;
- interrupts = <55>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
- status = "disabled";
- };
-
timers7: timers at 40001400 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 5633860..a9077e6 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -82,22 +82,6 @@
status = "disabled";
};
- timer3: timer at 40000400 {
- compatible = "st,stm32-timer";
- reg = <0x40000400 0x400>;
- interrupts = <29>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
- status = "disabled";
- };
-
- timer4: timer at 40000800 {
- compatible = "st,stm32-timer";
- reg = <0x40000800 0x400>;
- interrupts = <30>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
- status = "disabled";
- };
-
timer5: timer at 40000c00 {
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
@@ -105,22 +89,6 @@
clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
};
- timer6: timer at 40001000 {
- compatible = "st,stm32-timer";
- reg = <0x40001000 0x400>;
- interrupts = <54>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
- status = "disabled";
- };
-
- timer7: timer at 40001400 {
- compatible = "st,stm32-timer";
- reg = <0x40001400 0x400>;
- interrupts = <55>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
- status = "disabled";
- };
-
rtc: rtc at 40002800 {
compatible = "st,stm32-rtc";
reg = <0x40002800 0x400>;
--
2.7.4
prev parent reply other threads:[~2017-10-18 7:43 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-18 7:43 [PATCH v5 0/4] stm32 clocksource driver rework Benjamin Gaignard
2017-10-18 7:43 ` [PATCH v5 1/4] clocksource: stm32: convert driver to timer_of Benjamin Gaignard
2017-10-18 8:10 ` Julien Thierry
2017-10-18 7:43 ` [PATCH v5 2/4] clocksource: stm32: only use 32 bits timers Benjamin Gaignard
2017-10-18 8:21 ` Julien Thierry
2017-10-18 12:25 ` Benjamin Gaignard
2017-10-18 7:43 ` [PATCH v5 3/4] clocksource: stm32: add clocksource support Benjamin Gaignard
2017-10-18 7:43 ` Benjamin Gaignard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508312614-27750-5-git-send-email-benjamin.gaignard@linaro.org \
--to=benjamin.gaignard@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).