From mboxrd@z Thu Jan 1 00:00:00 1970 From: marco.franchi@nxp.com (Marco Franchi) Date: Fri, 20 Oct 2017 13:48:27 -0200 Subject: [PATCH v3 6/6] ARM: dts: imx53-tx53: Fix 'ethernet-phy@0' node with unit name and no reg property In-Reply-To: <1508514507-30736-1-git-send-email-marco.franchi@nxp.com> References: <1508514507-30736-1-git-send-email-marco.franchi@nxp.com> Message-ID: <1508514507-30736-6-git-send-email-marco.franchi@nxp.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following build warning is seen with W=1: Warning (unit_address_vs_reg): Node /soc/aips at 60000000/ethernet at 63fec000/ethernet-phy at 0 has a unit name, but no reg property Fix this warning by adding reg property from such node. Signed-off-by: Marco Franchi --- Changes since v2: -change message log -add reg property arch/arm/boot/dts/imx53-tx53.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 76e7186..61ecd13 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -226,6 +226,7 @@ status = "okay"; phy0: ethernet-phy at 0 { + reg = <0>; interrupts-extended = <&gpio2 4 IRQ_TYPE_EDGE_FALLING>; device_type = "ethernet-phy"; }; -- 2.7.4