[PATCH v2] usb: xhci: allow imod-interval to be configurable

[PATCH v2] usb: xhci: allow imod-interval to be configurable

[Adam Wallis]

The xHCI driver currently has the IMOD set to 160, which
translates to an IMOD interval of 40,000ns (160 * 250)ns

Commit 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
introduced a QUIRK for the MTK platform to adjust this interval to 20,
which translates to an IMOD interval of 5,000ns (20 * 250)ns. This is
due to the fact that the MTK controller IMOD interval is 8 times
as much as defined in xHCI spec.

Instead of adding more quirk bits for additional platforms, this patch
introduces the ability for vendors to set the IMOD_INTERVAL as is
optimal for their platform. By using device_property_read_u32() on
"imod-interval", the IMOD INTERVAL can be specified in nano seconds. If
no interval is specified, the default of 40,000ns (IMOD=160) will be
used.

No bounds checking has been implemented due to the fact that a vendor
may have violated the spec and would need to specify a value outside of
the max 8,000 IRQs/second limit specified in the xHCI spec.

Backwards compatibility is maintained for MTK_HOSTS through the quirk
bit, however, imod_interval should be pushed into device tree at a
future point and this quirk should be removed from xhci_plat_probe

Signed-off-by: Adam Wallis <awallis@codeaurora.org>
---
changes from v1:
  * Removed device_property_read_u32() per suggestion from greg k-h
  * Used ER_IRQ_INTERVAL_MASK in place of (u16) cast

 Documentation/devicetree/bindings/usb/usb-xhci.txt |  1 +
 drivers/usb/host/xhci-plat.c                       | 13 +++++++++++++
 drivers/usb/host/xhci.c                            |  7 ++-----
 drivers/usb/host/xhci.h                            |  2 ++
 4 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index ae6e484..3998459 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -29,6 +29,7 @@ Optional properties:
   - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
   - usb3-lpm-capable: determines if platform is USB3 LPM capable
   - quirk-broken-port-ped: set if the controller has broken port disable mechanism
+  - imod-interval: IMOD_INTERVAL in nano-seconds. Default is 40000
 
 Example:
 	usb at f0931000 {
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 09f164f..3c63de1 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -23,6 +23,7 @@
 #include "xhci-plat.h"
 #include "xhci-mvebu.h"
 #include "xhci-rcar.h"
+#include "xhci-mtk.h"
 
 static struct hc_driver __read_mostly xhci_plat_hc_driver;
 
@@ -269,6 +270,18 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped"))
 		xhci->quirks |= XHCI_BROKEN_PORT_PED;
 
+	/*
+	 * imod_interval is the interrupt modulation value in nanoseconds.
+	 * The increment interval is 8 times as much as that defined in
+	 * the xHCI spec on MTK's controller. This quirk check exists to provide
+	 * backwards compatibility, however, this should be pushed into
+	 * the device tree files at some point in the future and
+	 * checking the quirk should be removed from xhci_plat_probe.
+	 */
+	xhci->imod_interval = xhci->quirks & XHCI_MTK_HOST ? 5000 : 40000;
+
+	device_property_read_u32(sysdev, "imod-interval", &xhci->imod_interval);
+
 	hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
 	if (IS_ERR(hcd->usb_phy)) {
 		ret = PTR_ERR(hcd->usb_phy);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 2424d30..0b7755b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -586,11 +586,8 @@ int xhci_run(struct usb_hcd *hcd)
 			"// Set the interrupt modulation register");
 	temp = readl(&xhci->ir_set->irq_control);
 	temp &= ~ER_IRQ_INTERVAL_MASK;
-	/*
-	 * the increment interval is 8 times as much as that defined
-	 * in xHCI spec on MTK's controller
-	 */
-	temp |= (u32) ((xhci->quirks & XHCI_MTK_HOST) ? 20 : 160);
+	temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
+
 	writel(temp, &xhci->ir_set->irq_control);
 
 	/* Set the HCD state before we enable the irqs */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 99a014a..2a4177b 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1717,6 +1717,8 @@ struct xhci_hcd {
 	u8		max_interrupters;
 	u8		max_ports;
 	u8		isoc_threshold;
+	/* imod_interval in ns (I * 250ns) */
+	u32		imod_interval;
 	int		event_ring_max;
 	/* 4KB min, 128MB max */
 	int		page_size;
-- 
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v2] usb: xhci: allow imod-interval to be configurable

[Greg Kroah-Hartman]

On Wed, Nov 29, 2017 at 10:52:55AM -0500, Adam Wallis wrote:
> The xHCI driver currently has the IMOD set to 160, which
> translates to an IMOD interval of 40,000ns (160 * 250)ns
> 
> Commit 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
> introduced a QUIRK for the MTK platform to adjust this interval to 20,
> which translates to an IMOD interval of 5,000ns (20 * 250)ns. This is
> due to the fact that the MTK controller IMOD interval is 8 times
> as much as defined in xHCI spec.
> 
> Instead of adding more quirk bits for additional platforms, this patch
> introduces the ability for vendors to set the IMOD_INTERVAL as is
> optimal for their platform. By using device_property_read_u32() on
> "imod-interval", the IMOD INTERVAL can be specified in nano seconds. If
> no interval is specified, the default of 40,000ns (IMOD=160) will be
> used.
> 
> No bounds checking has been implemented due to the fact that a vendor
> may have violated the spec and would need to specify a value outside of
> the max 8,000 IRQs/second limit specified in the xHCI spec.
> 
> Backwards compatibility is maintained for MTK_HOSTS through the quirk
> bit, however, imod_interval should be pushed into device tree at a
> future point and this quirk should be removed from xhci_plat_probe
> 
> Signed-off-by: Adam Wallis <awallis@codeaurora.org>
> ---
> changes from v1:
>   * Removed device_property_read_u32() per suggestion from greg k-h
>   * Used ER_IRQ_INTERVAL_MASK in place of (u16) cast
> 
>  Documentation/devicetree/bindings/usb/usb-xhci.txt |  1 +
>  drivers/usb/host/xhci-plat.c                       | 13 +++++++++++++
>  drivers/usb/host/xhci.c                            |  7 ++-----
>  drivers/usb/host/xhci.h                            |  2 ++
>  4 files changed, 18 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
> index ae6e484..3998459 100644
> --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
> @@ -29,6 +29,7 @@ Optional properties:
>    - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
>    - usb3-lpm-capable: determines if platform is USB3 LPM capable
>    - quirk-broken-port-ped: set if the controller has broken port disable mechanism
> +  - imod-interval: IMOD_INTERVAL in nano-seconds. Default is 40000
>  
>  Example:
>  	usb at f0931000 {
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index 09f164f..3c63de1 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -23,6 +23,7 @@
>  #include "xhci-plat.h"
>  #include "xhci-mvebu.h"
>  #include "xhci-rcar.h"
> +#include "xhci-mtk.h"
>  
>  static struct hc_driver __read_mostly xhci_plat_hc_driver;
>  
> @@ -269,6 +270,18 @@ static int xhci_plat_probe(struct platform_device *pdev)
>  	if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped"))
>  		xhci->quirks |= XHCI_BROKEN_PORT_PED;
>  
> +	/*
> +	 * imod_interval is the interrupt modulation value in nanoseconds.
> +	 * The increment interval is 8 times as much as that defined in
> +	 * the xHCI spec on MTK's controller. This quirk check exists to provide
> +	 * backwards compatibility, however, this should be pushed into
> +	 * the device tree files at some point in the future and
> +	 * checking the quirk should be removed from xhci_plat_probe.
> +	 */
> +	xhci->imod_interval = xhci->quirks & XHCI_MTK_HOST ? 5000 : 40000;

Personally I hate ? : logic, just write the if statement out.  It
doesn't save anything except make it harder to read.

Yeah, the original code had it too.  Oh well, I'll leave it up to the
xhci maintainer, he is the one that has to maintain this, not me :)

thanks,

greg k-h

[PATCH v2] usb: xhci: allow imod-interval to be configurable

[Mathias Nyman]

On 29.11.2017 19:46, Greg Kroah-Hartman wrote:
> On Wed, Nov 29, 2017 at 10:52:55AM -0500, Adam Wallis wrote:
>> The xHCI driver currently has the IMOD set to 160, which
>> translates to an IMOD interval of 40,000ns (160 * 250)ns
>>
>> Commit 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
>> introduced a QUIRK for the MTK platform to adjust this interval to 20,
>> which translates to an IMOD interval of 5,000ns (20 * 250)ns. This is
>> due to the fact that the MTK controller IMOD interval is 8 times
>> as much as defined in xHCI spec.
>>
>> Instead of adding more quirk bits for additional platforms, this patch
>> introduces the ability for vendors to set the IMOD_INTERVAL as is
>> optimal for their platform. By using device_property_read_u32() on
>> "imod-interval", the IMOD INTERVAL can be specified in nano seconds. If
>> no interval is specified, the default of 40,000ns (IMOD=160) will be
>> used.
>>
>> No bounds checking has been implemented due to the fact that a vendor
>> may have violated the spec and would need to specify a value outside of
>> the max 8,000 IRQs/second limit specified in the xHCI spec.
>>
>> Backwards compatibility is maintained for MTK_HOSTS through the quirk
>> bit, however, imod_interval should be pushed into device tree at a
>> future point and this quirk should be removed from xhci_plat_probe
>>
>> Signed-off-by: Adam Wallis <awallis@codeaurora.org>
>> ---
>> changes from v1:
>>    * Removed device_property_read_u32() per suggestion from greg k-h
>>    * Used ER_IRQ_INTERVAL_MASK in place of (u16) cast
>>
>>   Documentation/devicetree/bindings/usb/usb-xhci.txt |  1 +
>>   drivers/usb/host/xhci-plat.c                       | 13 +++++++++++++
>>   drivers/usb/host/xhci.c                            |  7 ++-----
>>   drivers/usb/host/xhci.h                            |  2 ++
>>   4 files changed, 18 insertions(+), 5 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
>> index ae6e484..3998459 100644
>> --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
>> +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
>> @@ -29,6 +29,7 @@ Optional properties:
>>     - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
>>     - usb3-lpm-capable: determines if platform is USB3 LPM capable
>>     - quirk-broken-port-ped: set if the controller has broken port disable mechanism
>> +  - imod-interval: IMOD_INTERVAL in nano-seconds. Default is 40000
>>   
>>   Example:
>>   	usb at f0931000 {
>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>> index 09f164f..3c63de1 100644
>> --- a/drivers/usb/host/xhci-plat.c
>> +++ b/drivers/usb/host/xhci-plat.c
>> @@ -23,6 +23,7 @@
>>   #include "xhci-plat.h"
>>   #include "xhci-mvebu.h"
>>   #include "xhci-rcar.h"
>> +#include "xhci-mtk.h"
>>   
>>   static struct hc_driver __read_mostly xhci_plat_hc_driver;
>>   
>> @@ -269,6 +270,18 @@ static int xhci_plat_probe(struct platform_device *pdev)
>>   	if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped"))
>>   		xhci->quirks |= XHCI_BROKEN_PORT_PED;
>>   
>> +	/*
>> +	 * imod_interval is the interrupt modulation value in nanoseconds.
>> +	 * The increment interval is 8 times as much as that defined in
>> +	 * the xHCI spec on MTK's controller. This quirk check exists to provide
>> +	 * backwards compatibility, however, this should be pushed into
>> +	 * the device tree files at some point in the future and
>> +	 * checking the quirk should be removed from xhci_plat_probe.
>> +	 */
>> +	xhci->imod_interval = xhci->quirks & XHCI_MTK_HOST ? 5000 : 40000;
> 
> Personally I hate ? : logic, just write the if statement out.  It
> doesn't save anything except make it harder to read.
> 
> Yeah, the original code had it too.  Oh well, I'll leave it up to the
> xhci maintainer, he is the one that has to maintain this, not me :)
> 

I don't mind that line so much, this still looks better than the original.

I do however mind that I don't get any default imod interval value for my
pci based xhci host after this patch.
That needs to be fixed

Thanks
-Mathias

[PATCH v2] usb: xhci: allow imod-interval to be configurable

[Adam Wallis]

On 11/30/2017 3:41 AM, Mathias Nyman wrote:
[..]
> I do however mind that I don't get any default imod interval value for my
> pci based xhci host after this patch.
> That needs to be fixed
> 

Thanks Mathias, good catch. Where do you think I should initialize imod default
in PCI subsytem? I was thinking about in xhci_pci_setup but would like to hear
your thoughts since I deal much less often with USB PCI.

> Thanks
> -Mathias
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Adam

-- 
Adam Wallis
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.

[PATCH v2] usb: xhci: allow imod-interval to be configurable

[Chunfeng Yun]

Hi,
On Wed, 2017-11-29 at 10:52 -0500, Adam Wallis wrote:
> The xHCI driver currently has the IMOD set to 160, which
> translates to an IMOD interval of 40,000ns (160 * 250)ns
> 
> Commit 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
> introduced a QUIRK for the MTK platform to adjust this interval to 20,
> which translates to an IMOD interval of 5,000ns (20 * 250)ns. This is
> due to the fact that the MTK controller IMOD interval is 8 times
> as much as defined in xHCI spec.
> 
> Instead of adding more quirk bits for additional platforms, this patch
> introduces the ability for vendors to set the IMOD_INTERVAL as is
> optimal for their platform. By using device_property_read_u32() on
> "imod-interval", the IMOD INTERVAL can be specified in nano seconds. If
> no interval is specified, the default of 40,000ns (IMOD=160) will be
> used.
> 
> No bounds checking has been implemented due to the fact that a vendor
> may have violated the spec and would need to specify a value outside of
> the max 8,000 IRQs/second limit specified in the xHCI spec.
> 
> Backwards compatibility is maintained for MTK_HOSTS through the quirk
> bit, however, imod_interval should be pushed into device tree at a
> future point and this quirk should be removed from xhci_plat_probe
> 
> Signed-off-by: Adam Wallis <awallis@codeaurora.org>
> ---
> changes from v1:
>   * Removed device_property_read_u32() per suggestion from greg k-h
>   * Used ER_IRQ_INTERVAL_MASK in place of (u16) cast
> 
>  Documentation/devicetree/bindings/usb/usb-xhci.txt |  1 +
>  drivers/usb/host/xhci-plat.c                       | 13 +++++++++++++
>  drivers/usb/host/xhci.c                            |  7 ++-----
>  drivers/usb/host/xhci.h                            |  2 ++
>  4 files changed, 18 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
> index ae6e484..3998459 100644
> --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
> @@ -29,6 +29,7 @@ Optional properties:
>    - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
>    - usb3-lpm-capable: determines if platform is USB3 LPM capable
>    - quirk-broken-port-ped: set if the controller has broken port disable mechanism
> +  - imod-interval: IMOD_INTERVAL in nano-seconds. Default is 40000
>  
>  Example:
>  	usb at f0931000 {
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index 09f164f..3c63de1 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -23,6 +23,7 @@
>  #include "xhci-plat.h"
>  #include "xhci-mvebu.h"
>  #include "xhci-rcar.h"
> +#include "xhci-mtk.h"
Needn't it, MTK makes use of xhci-mtk.c but not xhci-plat.c

>  
>  static struct hc_driver __read_mostly xhci_plat_hc_driver;
>  
> @@ -269,6 +270,18 @@ static int xhci_plat_probe(struct platform_device *pdev)
>  	if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped"))
>  		xhci->quirks |= XHCI_BROKEN_PORT_PED;
>  
> +	/*
> +	 * imod_interval is the interrupt modulation value in nanoseconds.
> +	 * The increment interval is 8 times as much as that defined in
> +	 * the xHCI spec on MTK's controller. This quirk check exists to provide
> +	 * backwards compatibility, however, this should be pushed into
> +	 * the device tree files at some point in the future and
> +	 * checking the quirk should be removed from xhci_plat_probe.
> +	 */
> +	xhci->imod_interval = xhci->quirks & XHCI_MTK_HOST ? 5000 : 40000;
Can be moved into xhci-mtk.c for MTK quirk, like as following:

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 2d473e0..a03451b 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -699,6 +699,13 @@ static int xhci_mtk_probe(struct platform_device *pdev)
                goto power_off_phys;
        }

+       /*
+        * the increment interval is 8 times as much as that defined
+        * in xHCI spec on MTK's controller
+        */
+ 	xhci->imod_interval = 5000;
+       device_property_read_u32(dev, "imod-interval", &xhci->imod_interval);
+
        ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
        if (ret)
                goto put_usb3_hcd;

Thanks

> +
> +	device_property_read_u32(sysdev, "imod-interval", &xhci->imod_interval);
> +
>  	hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
>  	if (IS_ERR(hcd->usb_phy)) {
>  		ret = PTR_ERR(hcd->usb_phy);
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 2424d30..0b7755b 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -586,11 +586,8 @@ int xhci_run(struct usb_hcd *hcd)
>  			"// Set the interrupt modulation register");
>  	temp = readl(&xhci->ir_set->irq_control);
>  	temp &= ~ER_IRQ_INTERVAL_MASK;
> -	/*
> -	 * the increment interval is 8 times as much as that defined
> -	 * in xHCI spec on MTK's controller
> -	 */
> -	temp |= (u32) ((xhci->quirks & XHCI_MTK_HOST) ? 20 : 160);
> +	temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
> +
>  	writel(temp, &xhci->ir_set->irq_control);
>  
>  	/* Set the HCD state before we enable the irqs */
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index 99a014a..2a4177b 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1717,6 +1717,8 @@ struct xhci_hcd {
>  	u8		max_interrupters;
>  	u8		max_ports;
>  	u8		isoc_threshold;
> +	/* imod_interval in ns (I * 250ns) */
> +	u32		imod_interval;
>  	int		event_ring_max;
>  	/* 4KB min, 128MB max */
>  	int		page_size;

[PATCH v2] usb: xhci: allow imod-interval to be configurable

[Adam Wallis]

Hi Chunfeng,

On 11/30/2017 10:32 PM, Chunfeng Yun wrote:
> Hi,
> On Wed, 2017-11-29 at 10:52 -0500, Adam Wallis wrote:
>> The xHCI driver currently has the IMOD set to 160, which
>> translates to an IMOD interval of 40,000ns (160 * 250)ns
>>
>> Commit 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
>> introduced a QUIRK for the MTK platform to adjust this interval to 20,
[..]
>>  #include "xhci-mvebu.h"
>>  #include "xhci-rcar.h"
>> +#include "xhci-mtk.h"
> Needn't it, MTK makes use of xhci-mtk.c but not xhci-plat.c
> 

Thanks - I made this change in V3.

[..]
>>  
>>  static struct hc_driver __read_mostly xhci_plat_hc_driver;
>>  
>> @@ -269,6 +270,18 @@ static int xhci_plat_probe(struct platform_device *pdev)
>>  	if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped"))
>>  		xhci->quirks |= XHCI_BROKEN_PORT_PED;
>>  
>> +	/*
>> +	 * imod_interval is the interrupt modulation value in nanoseconds.
>> +	 * The increment interval is 8 times as much as that defined in
>> +	 * the xHCI spec on MTK's controller. This quirk check exists to provide
>> +	 * backwards compatibility, however, this should be pushed into
>> +	 * the device tree files at some point in the future and
>> +	 * checking the quirk should be removed from xhci_plat_probe.
>> +	 */
>> +	xhci->imod_interval = xhci->quirks & XHCI_MTK_HOST ? 5000 : 40000;
> Can be moved into xhci-mtk.c for MTK quirk, like as following:
> 

I moved this into V3 as suggested - could you test on an MTK platform (I don't
have one available) to see if it performs as expected?




-- 
Adam Wallis
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.