From: ludovic.Barre@st.com (Ludovic Barre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 0/9] ARM: stm32: add initial STM32MPU support
Date: Mon, 18 Dec 2017 16:17:43 +0100 [thread overview]
Message-ID: <1513610272-7824-1-git-send-email-ludovic.Barre@st.com> (raw)
From: Ludovic Barre <ludovic.barre@st.com>
change V2:
-Add stm32 documentation in this serie to avoid merge conflict
thread: "https://patchwork.kernel.org/patch/10102573/"
-Split bindings (stm32.txt) to separate patches.
-Remove ARCH_STM32_MCU/MPU flags
-Adopt rst format for Documentation/arm/stm32 files
-s/STMicrolectronics/STMicroelectronics/g
Ludovic Barre (9):
devicetree: bindings: Document supported STM32 SoC family
Documentation: arm: stm32: move to rst format
ARM: stm32: prepare stm32 family to welcome armv7 architecture
devicetree: bindings: stm32: add support of STM32MP157
ARM: stm32: add initial support for STM32MP157
pinctrl: stm32: Add STM32MP157 MPU support
ARM: configs: multi_v7: add stm32 support
ARM: dts: stm32: add stm32mp157c initial support
ARM: dts: stm32: add initial support of stm32mp157c eval board
Documentation/arm/stm32/overview.rst | 34 +
Documentation/arm/stm32/overview.txt | 33 -
Documentation/arm/stm32/stm32f429-overview.rst | 26 +
Documentation/arm/stm32/stm32f429-overview.txt | 22 -
Documentation/arm/stm32/stm32f746-overview.rst | 33 +
Documentation/arm/stm32/stm32f746-overview.txt | 34 -
Documentation/arm/stm32/stm32h743-overview.rst | 34 +
Documentation/arm/stm32/stm32h743-overview.txt | 30 -
Documentation/arm/stm32/stm32mp157-overview.rst | 19 +
Documentation/devicetree/bindings/arm/stm32.txt | 10 +
.../bindings/pinctrl/st,stm32-pinctrl.txt | 2 +
arch/arm/boot/dts/Makefile | 6 +-
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 185 ++
arch/arm/boot/dts/stm32mp157c-ed1.dts | 29 +
arch/arm/boot/dts/stm32mp157c-ev1.dts | 19 +
arch/arm/boot/dts/stm32mp157c.dtsi | 139 ++
arch/arm/configs/multi_v7_defconfig | 3 +
arch/arm/mach-stm32/Kconfig | 35 +-
arch/arm/mach-stm32/Makefile | 3 +-
arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} | 0
arch/arm/mach-stm32/board-mpu-dt.c | 16 +
drivers/pinctrl/stm32/Kconfig | 6 +
drivers/pinctrl/stm32/Makefile | 1 +
drivers/pinctrl/stm32/pinctrl-stm32mp157.c | 2188 ++++++++++++++++++++
24 files changed, 2773 insertions(+), 134 deletions(-)
create mode 100644 Documentation/arm/stm32/overview.rst
delete mode 100644 Documentation/arm/stm32/overview.txt
create mode 100644 Documentation/arm/stm32/stm32f429-overview.rst
delete mode 100644 Documentation/arm/stm32/stm32f429-overview.txt
create mode 100644 Documentation/arm/stm32/stm32f746-overview.rst
delete mode 100644 Documentation/arm/stm32/stm32f746-overview.txt
create mode 100644 Documentation/arm/stm32/stm32h743-overview.rst
delete mode 100644 Documentation/arm/stm32/stm32h743-overview.txt
create mode 100644 Documentation/arm/stm32/stm32mp157-overview.rst
create mode 100644 Documentation/devicetree/bindings/arm/stm32.txt
create mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c.dtsi
rename arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} (100%)
create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c
create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp157.c
--
2.7.4
next reply other threads:[~2017-12-18 15:17 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-18 15:17 Ludovic Barre [this message]
2017-12-18 15:17 ` [PATCH V2 1/9] devicetree: bindings: Document supported STM32 SoC family Ludovic Barre
2017-12-20 7:33 ` Linus Walleij
2017-12-18 15:17 ` [PATCH V2 2/9] Documentation: arm: stm32: move to rst format Ludovic Barre
2017-12-18 15:17 ` [PATCH V2 3/9] ARM: stm32: prepare stm32 family to welcome armv7 architecture Ludovic Barre
2017-12-18 20:24 ` Arnd Bergmann
2017-12-19 14:38 ` Alexandre Torgue
2017-12-21 16:39 ` Ludovic BARRE
2017-12-21 20:48 ` Arnd Bergmann
2017-12-19 14:43 ` Ludovic BARRE
2017-12-19 15:26 ` Arnd Bergmann
2017-12-19 15:54 ` Ludovic BARRE
2017-12-18 15:17 ` [PATCH V2 4/9] devicetree: bindings: stm32: add support of STM32MP157 Ludovic Barre
2017-12-20 18:24 ` Rob Herring
2017-12-18 15:17 ` [PATCH V2 5/9] ARM: stm32: add initial support for STM32MP157 Ludovic Barre
2017-12-18 15:17 ` [PATCH V2 6/9] pinctrl: stm32: Add STM32MP157 MPU support Ludovic Barre
2017-12-20 7:38 ` Linus Walleij
2017-12-18 15:17 ` [PATCH V2 7/9] ARM: configs: multi_v7: add stm32 support Ludovic Barre
2017-12-18 15:17 ` [PATCH V2 8/9] ARM: dts: stm32: add stm32mp157c initial support Ludovic Barre
2017-12-18 15:17 ` [PATCH V2 9/9] ARM: dts: stm32: add initial support of stm32mp157c eval board Ludovic Barre
2017-12-18 20:20 ` Arnd Bergmann
2017-12-19 8:45 ` Ludovic BARRE
2017-12-19 9:17 ` Alexandre Torgue
2017-12-20 7:44 ` Linus Walleij
2017-12-20 9:19 ` Alexandre Torgue
2017-12-21 9:18 ` Linus Walleij
2017-12-21 10:44 ` Alexandre Torgue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513610272-7824-1-git-send-email-ludovic.Barre@st.com \
--to=ludovic.barre@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox