From: sudeep.holla@arm.com (Sudeep Holla)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 18/20] hwmon: add support for sensors exported via ARM SCMI
Date: Tue, 2 Jan 2018 14:42:40 +0000 [thread overview]
Message-ID: <1514904162-11201-19-git-send-email-sudeep.holla@arm.com> (raw)
In-Reply-To: <1514904162-11201-1-git-send-email-sudeep.holla@arm.com>
Create a driver to add support for SoC sensors exported by the System
Control Processor (SCP) via the System Control and Management Interface
(SCMI). The supported sensor types is one of voltage, temperature,
current, and power.
The sensor labels and values provided by the SCP are exported via the
hwmon sysfs interface.
Cc: linux-hwmon at vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
drivers/hwmon/Kconfig | 12 +++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/scmi-hwmon.c | 233 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 246 insertions(+)
create mode 100644 drivers/hwmon/scmi-hwmon.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7ad017690e3a..518483386bd2 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -321,6 +321,18 @@ config SENSORS_APPLESMC
Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.
+config SENSORS_ARM_SCMI
+ tristate "ARM SCMI Sensors"
+ depends on ARM_SCMI_PROTOCOL
+ depends on THERMAL || !THERMAL_OF
+ help
+ This driver provides support for temperature, voltage, current
+ and power sensors available on SCMI based platforms. The actual
+ number and type of sensors exported depend on the platform.
+
+ This driver can also be built as a module. If so, the module
+ will be called scmi-hwmon.
+
config SENSORS_ARM_SCPI
tristate "ARM SCPI Sensors"
depends on ARM_SCPI_PROTOCOL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 0fe489fab663..86ae4011021f 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
+obj-$(CONFIG_SENSORS_ARM_SCMI) += scmi-hwmon.o
obj-$(CONFIG_SENSORS_ARM_SCPI) += scpi-hwmon.o
obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o
obj-$(CONFIG_SENSORS_ASPEED) += aspeed-pwm-tacho.o
diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
new file mode 100644
index 000000000000..7a0ab768d4b5
--- /dev/null
+++ b/drivers/hwmon/scmi-hwmon.c
@@ -0,0 +1,233 @@
+/*
+ * System Control and Management Interface(SCMI) based hwmon sensor driver
+ *
+ * Copyright (C) 2017 ARM Ltd.
+ * Sudeep Holla <sudeep.holla@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/scmi_protocol.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+
+struct scmi_sensors {
+ const struct scmi_handle *handle;
+ const struct scmi_sensor_info **info[hwmon_max];
+};
+
+static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ int ret;
+ u64 value;
+ const struct scmi_sensor_info *sensor;
+ struct scmi_sensors *scmi_sensors = dev_get_drvdata(dev);
+ const struct scmi_handle *h = scmi_sensors->handle;
+
+ sensor = *(scmi_sensors->info[type] + channel);
+ ret = h->sensor_ops->reading_get(h, sensor->id, false, &value);
+ if (!ret)
+ *val = value;
+
+ return ret;
+}
+
+static int
+scmi_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ const struct scmi_sensor_info *sensor;
+ struct scmi_sensors *scmi_sensors = dev_get_drvdata(dev);
+
+ sensor = *(scmi_sensors->info[type] + channel);
+ *str = sensor->name;
+
+ return 0;
+}
+
+static umode_t
+scmi_hwmon_is_visible(const void *drvdata, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct scmi_sensor_info *sensor;
+ const struct scmi_sensors *scmi_sensors = drvdata;
+
+ sensor = *(scmi_sensors->info[type] + channel);
+ if (sensor && sensor->name)
+ return S_IRUGO;
+
+ return 0;
+}
+
+static const struct hwmon_ops scmi_hwmon_ops = {
+ .is_visible = scmi_hwmon_is_visible,
+ .read = scmi_hwmon_read,
+ .read_string = scmi_hwmon_read_string,
+};
+
+static struct hwmon_chip_info scmi_chip_info = {
+ .ops = &scmi_hwmon_ops,
+ .info = NULL,
+};
+
+static int scmi_hwmon_add_chan_info(struct hwmon_channel_info *scmi_hwmon_chan,
+ struct device *dev, int num,
+ enum hwmon_sensor_types type, u32 config)
+{
+ int i;
+ u32 *cfg = devm_kcalloc(dev, num + 1, sizeof(*cfg), GFP_KERNEL);
+
+ if (!cfg)
+ return -ENOMEM;
+
+ scmi_hwmon_chan->type = type;
+ scmi_hwmon_chan->config = cfg;
+ for (i = 0; i < num; i++, cfg++)
+ *cfg = config;
+
+ return 0;
+}
+
+static enum hwmon_sensor_types scmi_types[] = {
+ [TEMPERATURE_C] = hwmon_temp,
+ [VOLTAGE] = hwmon_in,
+ [CURRENT] = hwmon_curr,
+ [POWER] = hwmon_power,
+ [ENERGY] = hwmon_energy,
+};
+
+static u32 hwmon_attributes[] = {
+ [hwmon_chip] = HWMON_C_REGISTER_TZ,
+ [hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL,
+ [hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL,
+ [hwmon_curr] = HWMON_C_INPUT | HWMON_C_LABEL,
+ [hwmon_power] = HWMON_P_INPUT | HWMON_P_LABEL,
+ [hwmon_energy] = HWMON_E_INPUT | HWMON_E_LABEL,
+};
+
+static int scmi_hwmon_probe(struct scmi_device *sdev)
+{
+ int i, idx;
+ u16 nr_sensors;
+ enum hwmon_sensor_types type;
+ struct scmi_sensors *scmi_sensors;
+ const struct scmi_sensor_info *sensor;
+ int nr_count[hwmon_max] = {0}, nr_types = 0;
+ const struct hwmon_chip_info *chip_info;
+ struct device *hwdev, *dev = &sdev->dev;
+ struct hwmon_channel_info *scmi_hwmon_chan;
+ const struct hwmon_channel_info **ptr_scmi_ci;
+ const struct scmi_handle *handle = sdev->handle;
+
+ if (!handle || !handle->sensor_ops)
+ return -ENODEV;
+
+ nr_sensors = handle->sensor_ops->count_get(handle);
+ if (!nr_sensors)
+ return -EIO;
+
+ scmi_sensors = devm_kzalloc(dev, sizeof(*scmi_sensors), GFP_KERNEL);
+ if (!scmi_sensors)
+ return -ENOMEM;
+
+ scmi_sensors->handle = handle;
+
+ for (i = 0; i < nr_sensors; i++) {
+ sensor = handle->sensor_ops->info_get(handle, i);
+ if (!sensor)
+ return PTR_ERR(sensor);
+
+ switch (sensor->type) {
+ case TEMPERATURE_C:
+ case VOLTAGE:
+ case CURRENT:
+ case POWER:
+ case ENERGY:
+ type = scmi_types[sensor->type];
+ if (!nr_count[type])
+ nr_types++;
+ nr_count[type]++;
+ break;
+ }
+ }
+
+ if (nr_count[hwmon_temp])
+ nr_count[hwmon_chip]++, nr_types++;
+
+ scmi_hwmon_chan = devm_kcalloc(dev, nr_types, sizeof(*scmi_hwmon_chan),
+ GFP_KERNEL);
+ if (!scmi_hwmon_chan)
+ return -ENOMEM;
+
+ ptr_scmi_ci = devm_kcalloc(dev, nr_types + 1, sizeof(*ptr_scmi_ci),
+ GFP_KERNEL);
+ if (!ptr_scmi_ci)
+ return -ENOMEM;
+
+ scmi_chip_info.info = ptr_scmi_ci;
+ chip_info = &scmi_chip_info;
+
+ for (type = 0; type < hwmon_max && nr_count[type]; type++) {
+ scmi_hwmon_add_chan_info(scmi_hwmon_chan, dev, nr_count[type],
+ type, hwmon_attributes[type]);
+ *ptr_scmi_ci++ = scmi_hwmon_chan++;
+
+ scmi_sensors->info[type] =
+ devm_kcalloc(dev, nr_count[type],
+ sizeof(*scmi_sensors->info), GFP_KERNEL);
+ if (!scmi_sensors->info[type])
+ return -ENOMEM;
+ }
+
+ for (i = nr_sensors - 1; i >= 0 ; i--) {
+ sensor = handle->sensor_ops->info_get(handle, i);
+ if (!sensor)
+ continue;
+
+ switch (sensor->type) {
+ case TEMPERATURE_C:
+ case VOLTAGE:
+ case CURRENT:
+ case POWER:
+ case ENERGY:
+ type = scmi_types[sensor->type];
+ idx = --nr_count[type];
+ *(scmi_sensors->info[type] + idx) = sensor;
+ break;
+ }
+ }
+
+ hwdev = devm_hwmon_device_register_with_info(dev, "scmi_sensors",
+ scmi_sensors, chip_info,
+ NULL);
+
+ return PTR_ERR_OR_ZERO(hwdev);
+}
+
+static const struct scmi_device_id scmi_id_table[] = {
+ { SCMI_PROTOCOL_SENSOR },
+ { },
+};
+MODULE_DEVICE_TABLE(scmi, scmi_id_table);
+
+static struct scmi_driver scmi_hwmon_drv = {
+ .name = "scmi-hwmon",
+ .probe = scmi_hwmon_probe,
+ .id_table = scmi_id_table,
+};
+module_scmi_driver(scmi_hwmon_drv);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCMI HWMON interface driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
next prev parent reply other threads:[~2018-01-02 14:42 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-02 14:42 [PATCH v5 00/20] firmware: ARM System Control and Management Interface(SCMI) support Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 01/20] dt-bindings: mailbox: add support for mailbox client shared memory Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 02/20] dt-bindings: arm: add support for ARM System Control and Management Interface(SCMI) protocol Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 03/20] firmware: arm_scmi: add basic driver infrastructure for SCMI Sudeep Holla
2018-01-04 19:21 ` Alexey Klimov
2018-01-11 14:56 ` Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 04/20] firmware: arm_scmi: add common infrastructure and support for base protocol Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 05/20] firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices Sudeep Holla
2018-02-19 11:35 ` Arnd Bergmann
2018-02-19 11:44 ` Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 06/20] firmware: arm_scmi: add initial support for performance protocol Sudeep Holla
2018-01-12 14:55 ` Alexey Klimov
2018-01-12 15:41 ` Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 07/20] firmware: arm_scmi: add initial support for clock protocol Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 08/20] firmware: arm_scmi: add initial support for power protocol Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 09/20] firmware: arm_scmi: add initial support for sensor protocol Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 10/20] firmware: arm_scmi: probe and initialise all the supported protocols Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 11/20] firmware: arm_scmi: add support for polling based SCMI transfers Sudeep Holla
2018-02-19 11:32 ` Arnd Bergmann
2018-02-19 11:50 ` Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 12/20] firmware: arm_scmi: add option for polling based performance domain operations Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 13/20] firmware: arm_scmi: refactor in preparation to support per-protocol channels Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 14/20] firmware: arm_scmi: add per-protocol channels support using idr objects Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 15/20] firmware: arm_scmi: add device power domain support using genpd Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 16/20] clk: add support for clocks provided by SCMI Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 17/20] hwmon: (core) Add hwmon_max to hwmon_sensor_types enumeration Sudeep Holla
2018-01-02 14:42 ` Sudeep Holla [this message]
2018-01-02 14:42 ` [PATCH v5 19/20] cpufreq: add support for CPU DVFS based on SCMI message protocol Sudeep Holla
2018-01-02 14:42 ` [PATCH v5 20/20] cpufreq: scmi: add support for fast frequency switching Sudeep Holla
2018-01-04 22:10 ` Alexey Klimov
2018-01-05 10:45 ` Sudeep Holla
-- strict thread matches above, loose matches on Subject: below --
2018-02-12 18:45 [PATCH v5 00/20][RESEND] firmware: ARM System Control and Management Interface(SCMI) support Sudeep Holla
2018-02-12 18:45 ` [PATCH v5 18/20] hwmon: add support for sensors exported via ARM SCMI Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1514904162-11201-19-git-send-email-sudeep.holla@arm.com \
--to=sudeep.holla@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).