From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawnguo@kernel.org (Shawn Guo) Date: Wed, 3 Jan 2018 13:57:19 +0800 Subject: [GIT PULL 4/5] Freescale arm64 device tree updates for 4.16 In-Reply-To: <1514959040-9992-1-git-send-email-shawnguo@kernel.org> References: <1514959040-9992-1-git-send-email-shawnguo@kernel.org> Message-ID: <1514959040-9992-4-git-send-email-shawnguo@kernel.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following changes since commit 50c4c4e268a2d7a3e58ebb698ac74da0de40ae36: Linux 4.15-rc3 (2017-12-10 17:56:26 -0800) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-4.16 for you to fetch changes up to 1e33300782235ae6fdc891d9c3ba04ba59da6f3d: arm64: dts: ls208xa: add power monitor chip node (2017-12-26 17:14:13 +0800) ---------------------------------------------------------------- Freescale arm64 device tree updates for 4.16: - LS1088A updates: add device support for DCFG, qoriq-mc, and USB. - Add power monitor device INA220 for ls208xa-rdb board. ---------------------------------------------------------------- Ashish Kumar (1): arm64: dts: ls1088a: Added dcfg node in ls1088a dtsi Ioana Ciornei (1): arm64: dts: ls1088a: add fsl-mc hardware resource manager node Yuantian Tang (1): arm64: dts: ls208xa: add power monitor chip node yinbo.zhu (1): arm64: dts: ls1088a: Add USB support arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++ arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 97 ++++++++++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 12 +++ 3 files changed, 117 insertions(+)