From mboxrd@z Thu Jan 1 00:00:00 1970 From: jbrunet@baylibre.com (Jerome Brunet) Date: Fri, 05 Jan 2018 11:29:23 +0100 Subject: [PATCH 3/6] ARM64: dts: meson-axg: uart: Add the clock info description In-Reply-To: <20180105095621.196472-4-yixun.lan@amlogic.com> References: <20180105095621.196472-1-yixun.lan@amlogic.com> <20180105095621.196472-4-yixun.lan@amlogic.com> Message-ID: <1515148163.5048.23.camel@baylibre.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, 2018-01-05 at 17:56 +0800, Yixun Lan wrote: > Add the clock info description for the EE UART controller. > > Signed-off-by: Yixun Lan > --- > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > index 9636a7c5f6ed..f6bf01cfff4b 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > @@ -146,6 +146,8 @@ > reg = <0x0 0x24000 0x0 0x18>; > interrupts = ; > status = "disabled"; > + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; > + clock-names = "xtal", "pclk", "baud"; This should squashed with change #1, where you remove amlogic,meson-uartcompatible. Otherwise uart is going to be broken between these patches. > }; > > uart_B: serial at 23000 { > @@ -153,6 +155,8 @@ > reg = <0x0 0x23000 0x0 0x18>; > interrupts = ; > status = "disabled"; > + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; > + clock-names = "xtal", "pclk", "baud"; > }; > }; >