linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: david@lechnology.com (David Lechner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 19/44] clk: davinci: New driver for TI DA8XX CFGCHIP clocks
Date: Sun,  7 Jan 2018 20:17:18 -0600	[thread overview]
Message-ID: <1515377863-20358-20-git-send-email-david@lechnology.com> (raw)
In-Reply-To: <1515377863-20358-1-git-send-email-david@lechnology.com>

This adds a new driver for the gate and multiplexer clocks in the
CFGCHIPn syscon registers on TI DA8XX-type SoCs.

Signed-off-by: David Lechner <david@lechnology.com>
---
 drivers/clk/davinci/Makefile        |   2 +
 drivers/clk/davinci/da8xx-cfgchip.c | 203 ++++++++++++++++++++++++++++++++++++
 2 files changed, 205 insertions(+)
 create mode 100644 drivers/clk/davinci/da8xx-cfgchip.c

diff --git a/drivers/clk/davinci/Makefile b/drivers/clk/davinci/Makefile
index 6c388d4..11178b7 100644
--- a/drivers/clk/davinci/Makefile
+++ b/drivers/clk/davinci/Makefile
@@ -1,6 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
 ifeq ($(CONFIG_COMMON_CLK), y)
+obj-$(CONFIG_ARCH_DAVINCI_DA8XX)	+= da8xx-cfgchip.o
+
 obj-y += pll.o
 obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= pll-da830.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= pll-da850.o
diff --git a/drivers/clk/davinci/da8xx-cfgchip.c b/drivers/clk/davinci/da8xx-cfgchip.c
new file mode 100644
index 0000000..772e09a
--- /dev/null
+++ b/drivers/clk/davinci/da8xx-cfgchip.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Clock driver for DA8xx/AM17xx/AM18xx/OMAP-L13x CFGCHIP
+ *
+ * Copyright (C) 2017 David Lechner <david@lechnology.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#ifdef CONFIG_OF
+struct da8xx_cfgchip_gate_clk {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	u32 reg;
+	u32 mask;
+};
+
+#define to_da8xx_cfgchip_gate_clk(_hw) \
+	container_of((_hw), struct da8xx_cfgchip_gate_clk, hw)
+
+static int da8xx_cfgchip_gate_clk_enable(struct clk_hw *hw)
+{
+	struct da8xx_cfgchip_gate_clk *clk = to_da8xx_cfgchip_gate_clk(hw);
+
+	return regmap_write_bits(clk->regmap, clk->reg, clk->mask, clk->mask);
+}
+
+static void da8xx_cfgchip_gate_clk_disable(struct clk_hw *hw)
+{
+	struct da8xx_cfgchip_gate_clk *clk = to_da8xx_cfgchip_gate_clk(hw);
+
+	regmap_write_bits(clk->regmap, clk->reg, clk->mask, 0);
+}
+
+static int da8xx_cfgchip_gate_clk_is_enabled(struct clk_hw *hw)
+{
+	struct da8xx_cfgchip_gate_clk *clk = to_da8xx_cfgchip_gate_clk(hw);
+	unsigned int val;
+
+	regmap_read(clk->regmap, clk->reg, &val);
+
+	return !!(val & clk->mask);
+}
+
+static const struct clk_ops da8xx_cfgchip_gate_clk_ops = {
+	.enable		= da8xx_cfgchip_gate_clk_enable,
+	.disable	= da8xx_cfgchip_gate_clk_disable,
+	.is_enabled	= da8xx_cfgchip_gate_clk_is_enabled,
+};
+
+static void da8xx_cfgchip_gate_clk_init(struct device_node *np, u32 reg,
+					u32 mask)
+{
+	struct da8xx_cfgchip_gate_clk *clk;
+	struct clk_init_data init;
+	const char *name = np->name;
+	const char *parent_name;
+	struct regmap *regmap;
+	int ret;
+
+	of_property_read_string(np, "clock-output-names", &name);
+	parent_name = of_clk_get_parent_name(np, 0);
+
+	regmap = syscon_node_to_regmap(of_get_parent(np));
+	if (IS_ERR(regmap)) {
+		pr_err("%s: no regmap for syscon parent of %s (%ld)\n",
+		       __func__, np->full_name, PTR_ERR(regmap));
+		return;
+	}
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+	if (!clk)
+		return;
+
+	init.name = name;
+	init.ops = &da8xx_cfgchip_gate_clk_ops;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+	init.flags = 0;
+
+	clk->hw.init = &init;
+	clk->regmap = regmap;
+	clk->reg = reg;
+	clk->mask = mask;
+
+	ret = clk_hw_register(NULL, &clk->hw);
+	if (ret) {
+		pr_err("%s: failed to register %s (%d)\n", __func__,
+		       np->full_name, ret);
+		return;
+	}
+
+	of_clk_add_hw_provider(np, of_clk_hw_simple_get, &clk->hw);
+}
+
+static void da8xx_tbclk_init(struct device_node *np)
+{
+	da8xx_cfgchip_gate_clk_init(np, CFGCHIP(1), CFGCHIP1_TBCLKSYNC);
+}
+CLK_OF_DECLARE(da8xx_tbclk, "ti,da830-tbclk", da8xx_tbclk_init);
+
+struct da8xx_cfgchip_mux_clk {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	u32 reg;
+	u32 mask;
+};
+
+#define to_da8xx_cfgchip_mux_clk(_hw) \
+	container_of((_hw), struct da8xx_cfgchip_mux_clk, hw)
+
+static int da8xx_cfgchip_mux_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct da8xx_cfgchip_mux_clk *clk = to_da8xx_cfgchip_mux_clk(hw);
+	unsigned int val = index ? clk->mask : 0;
+
+	return regmap_write_bits(clk->regmap, clk->reg, clk->mask, val);
+}
+
+static u8 da8xx_cfgchip_mux_clk_get_parent(struct clk_hw *hw)
+{
+	struct da8xx_cfgchip_mux_clk *clk = to_da8xx_cfgchip_mux_clk(hw);
+	unsigned int val;
+
+	regmap_read(clk->regmap, clk->reg, &val);
+
+	return (val & clk->mask) ? 1 : 0;
+}
+
+static const struct clk_ops da8xx_cfgchip_mux_clk_ops = {
+	.set_parent	= da8xx_cfgchip_mux_clk_set_parent,
+	.get_parent	= da8xx_cfgchip_mux_clk_get_parent,
+};
+
+static void da8xx_cfgchip_mux_clk_init(struct device_node *np, u32 reg,
+				       u32 mask)
+{
+	struct da8xx_cfgchip_mux_clk *clk;
+	struct clk_init_data init;
+	const char *name = np->name;
+	const char *parent_names[2];
+	struct regmap *regmap;
+	int ret;
+
+	ret = of_property_match_string(np, "clock-names", "pll0_sysclk2");
+	parent_names[0] = of_clk_get_parent_name(np, ret);
+	if (!parent_names[0]) {
+		pr_err("%s: missing pll0_sysclk2 clock\n", __func__);
+		return;
+	}
+
+	ret = of_property_match_string(np, "clock-names", "pll1_sysclk2");
+	parent_names[1] = of_clk_get_parent_name(np, ret);
+	if (!parent_names[1]) {
+		pr_err("%s: missing pll1_sysclk2 clock\n", __func__);
+		return;
+	}
+
+	regmap = syscon_node_to_regmap(of_get_parent(np));
+	if (IS_ERR(regmap)) {
+		pr_err("%s: no regmap for syscon parent of %s (%ld)\n",
+		       __func__, np->full_name, PTR_ERR(regmap));
+		return;
+	}
+
+	of_property_read_string(np, "clock-output-names", &name);
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+	if (!clk)
+		return;
+
+	init.name = name;
+	init.ops = &da8xx_cfgchip_mux_clk_ops;
+	init.parent_names = parent_names;
+	init.num_parents = 2;
+	init.flags = 0;
+
+	clk->hw.init = &init;
+	clk->regmap = regmap;
+	clk->reg = reg;
+	clk->mask = mask;
+
+	ret = clk_hw_register(NULL, &clk->hw);
+	if (ret) {
+		pr_err("%s: failed to register %s (%d)\n", __func__,
+		       np->full_name, ret);
+		return;
+	}
+
+	of_clk_add_hw_provider(np, of_clk_hw_simple_get, &clk->hw);
+}
+
+static void da8xx_async3_init(struct device_node *np)
+{
+	da8xx_cfgchip_mux_clk_init(np, CFGCHIP(3), CFGCHIP3_ASYNC3_CLKSRC);
+}
+CLK_OF_DECLARE(da8xx_async3, "ti,da850-async3-clock", da8xx_async3_init);
+#endif
-- 
2.7.4

  parent reply	other threads:[~2018-01-08  2:17 UTC|newest]

Thread overview: 104+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-08  2:16 [PATCH v5 00/44] ARM: davinci: convert to common clock framework​ David Lechner
2018-01-08  2:17 ` [PATCH v5 01/44] dt-bindings: clock: Add new bindings for TI Davinci PLL clocks David Lechner
2018-01-08 14:00   ` Sekhar Nori
2018-01-08 16:29     ` David Lechner
2018-01-09 12:35       ` Sekhar Nori
2018-01-10  3:01         ` David Lechner
2018-01-10 18:52           ` Sekhar Nori
2018-01-10 22:24             ` Adam Ford
2018-01-11  2:50               ` David Lechner
2018-01-11 12:45                 ` Adam Ford
2018-01-11 15:47                   ` Sekhar Nori
2018-01-11 16:14                     ` Adam Ford
2018-01-11 17:22                   ` David Lechner
2018-01-11 18:09                     ` Adam Ford
2018-01-11 18:29                       ` David Lechner
2018-01-11 18:50                         ` Adam Ford
2018-01-11 20:04                           ` David Lechner
2018-01-11 20:58                             ` Adam Ford
2018-01-11 21:04                               ` David Lechner
2018-01-11 21:34                                 ` Adam Ford
2018-01-11 21:46                                   ` David Lechner
2018-01-12  6:03                                     ` Sekhar Nori
2018-01-11 23:20                       ` David Lechner
2018-01-11  2:54             ` David Lechner
2018-01-08  2:17 ` [PATCH v5 02/44] clk: davinci: New driver for davinci " David Lechner
2018-01-12  9:21   ` Sekhar Nori
2018-01-12 15:25     ` David Lechner
2018-01-12 15:30       ` Adam Ford
2018-01-12 15:48         ` David Lechner
2018-01-12 16:18       ` Sekhar Nori
2018-01-13  1:11         ` David Lechner
2018-01-16  6:48           ` Sekhar Nori
2018-01-13  2:13     ` David Lechner
2018-01-16  6:32       ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 03/44] clk: davinci: Add platform information for TI DA830 PLL David Lechner
2018-01-12  9:41   ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 04/44] clk: davinci: Add platform information for TI DA850 PLL David Lechner
2018-01-08  2:17 ` [PATCH v5 05/44] clk: davinci: Add platform information for TI DM355 PLL David Lechner
2018-01-08  2:17 ` [PATCH v5 06/44] clk: davinci: Add platform information for TI DM365 PLL David Lechner
2018-01-08  2:17 ` [PATCH v5 07/44] clk: davinci: Add platform information for TI DM644x PLL David Lechner
2018-01-08  2:17 ` [PATCH v5 08/44] clk: davinci: Add platform information for TI DM646x PLL David Lechner
2018-01-08  2:17 ` [PATCH v5 09/44] dt-bindings: clock: New bindings for TI Davinci PSC David Lechner
2018-01-11 21:22   ` Rob Herring
2018-01-08  2:17 ` [PATCH v5 10/44] clk: davinci: New driver for davinci PSC clocks David Lechner
     [not found]   ` <e0a9af55-a8b1-c359-fe88-d038648e02f1@ti.com>
     [not found]     ` <83f3d207-9645-cbdf-d6cf-b6e6a8458abe@lechnology.com>
2018-01-17 12:25       ` Sekhar Nori
2018-01-17 17:28         ` David Lechner
2018-01-08  2:17 ` [PATCH v5 11/44] clk: davinci: Add platform information for TI DA830 PSC David Lechner
     [not found]   ` <91fe16dc-907e-6dbb-c8db-c27561132093@ti.com>
     [not found]     ` <4dd36ca7-e41d-58d8-ec8c-787978307943@lechnology.com>
2018-01-17 12:18       ` Sekhar Nori
2018-01-17 17:32         ` David Lechner
2018-01-18  7:53           ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 12/44] clk: davinci: Add platform information for TI DA850 PSC David Lechner
     [not found]   ` <8d09dba6-9b1d-e06e-8730-256b8a4320db@ti.com>
     [not found]     ` <b6baa17e-1239-c209-9eca-52e5da73e921@lechnology.com>
2018-01-17 11:57       ` Sekhar Nori
2018-01-17 17:33         ` David Lechner
2018-01-17 19:08         ` David Lechner
2018-01-18  6:37           ` Sekhar Nori
2018-02-09 16:22   ` Bartosz Golaszewski
2018-02-09 16:48     ` Michael Turquette
2018-02-12  3:03       ` David Lechner
2018-04-05 13:09       ` Sekhar Nori
2018-04-05 13:44         ` Bartosz Golaszewski
2018-04-05 14:36           ` Sekhar Nori
2018-04-05 15:37             ` David Lechner
2018-04-05 15:51             ` Bartosz Golaszewski
2018-04-06  9:37               ` Sekhar Nori
2018-04-06 16:46                 ` Stephen Boyd
2018-04-23 14:59                   ` David Lechner
2018-04-24  8:28                     ` Sekhar Nori
2018-04-24 16:11                       ` David Lechner
2018-04-25  6:07                         ` Sekhar Nori
2018-04-25 10:09                           ` Bartosz Golaszewski
2018-04-25 10:26                             ` Bartosz Golaszewski
2018-01-08  2:17 ` [PATCH v5 13/44] clk: davinci: Add platform information for TI DM355 PSC David Lechner
2018-01-08  2:17 ` [PATCH v5 14/44] clk: davinci: Add platform information for TI DM365 PSC David Lechner
2018-01-08  2:17 ` [PATCH v5 15/44] clk: davinci: Add platform information for TI DM644x PSC David Lechner
2018-01-17 13:57   ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 16/44] clk: davinci: Add platform information for TI DM646x PSC David Lechner
2018-01-17 14:59   ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 17/44] dt-bindings: clock: Add bindings for DA8XX CFGCHIP gate clocks David Lechner
2018-01-11 21:45   ` Rob Herring
2018-01-11 21:51     ` David Lechner
2018-01-08  2:17 ` [PATCH v5 18/44] dt-bindings: clock: Add binding for TI DA8XX CFGCHIP mux clocks David Lechner
2018-01-08  2:17 ` David Lechner [this message]
2018-01-17 15:31   ` [PATCH v5 19/44] clk: davinci: New driver for TI DA8XX CFGCHIP clocks Sekhar Nori
2018-01-17 17:35     ` David Lechner
2018-01-08  2:17 ` [PATCH v5 20/44] dt-bindings: clock: Add bindings for TI DA8XX USB PHY clocks David Lechner
2018-01-18 12:10   ` Sekhar Nori
2018-01-18 19:00     ` David Lechner
2018-01-19  6:17       ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 21/44] clk: davinci: New driver " David Lechner
2018-01-18 13:05   ` Sekhar Nori
2018-01-18 18:49     ` David Lechner
2018-01-19  5:04       ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 22/44] ARM: davinci: move davinci_clk_init() to init_time David Lechner
2018-01-08  2:17 ` [PATCH v5 23/44] ARM: da830: add new clock init using common clock framework David Lechner
2018-01-08  2:17 ` [PATCH v5 24/44] ARM: da850: " David Lechner
2018-01-18 15:24   ` Sekhar Nori
2018-01-08  2:17 ` [PATCH v5 25/44] ARM: dm355: " David Lechner
2018-01-08  2:17 ` [PATCH v5 26/44] ARM: dm365: " David Lechner
2018-01-08  2:17 ` [PATCH v5 27/44] ARM: dm644x: " David Lechner
2018-01-08  2:17 ` [PATCH v5 28/44] ARM: dm646x: " David Lechner
2018-01-08  2:17 ` [PATCH v5 29/44] ARM: da8xx: add new USB PHY " David Lechner
2018-01-18 15:14   ` Sekhar Nori
2018-01-18 18:43     ` David Lechner
2018-01-19  5:08       ` Sekhar Nori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1515377863-20358-20-git-send-email-david@lechnology.com \
    --to=david@lechnology.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).