From: david@lechnology.com (David Lechner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 24/44] ARM: da850: add new clock init using common clock framework
Date: Sun, 7 Jan 2018 20:17:23 -0600 [thread overview]
Message-ID: <1515377863-20358-25-git-send-email-david@lechnology.com> (raw)
In-Reply-To: <1515377863-20358-1-git-send-email-david@lechnology.com>
This adds the new board-specfic clock init in mach-davinci/da850.c using
the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Some CFGCHIP* #defines are removed since they are included in the
linux/mfd/da8xx-cfgchip.h header file.
Also clean up the #includes since we are adding some here.
Signed-off-by: David Lechner <david@lechnology.com>
---
arch/arm/mach-davinci/da850.c | 74 +++++++++++++++++++++++++++++++++++--------
1 file changed, 61 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 34117e61..4804096 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,39 +11,44 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clk/davinci.h>
#include <linux/clkdev.h>
+#include <linux/cpufreq.h>
#include <linux/gpio.h>
#include <linux/init.h>
-#include <linux/clk.h>
+#include <linux/log2.h>
+#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
#include <linux/regulator/consumer.h>
-#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach/map.h>
-#include "psc.h"
-#include <mach/irqs.h>
-#include <mach/cputype.h>
#include <mach/common.h>
-#include <mach/time.h>
-#include <mach/da8xx.h>
#include <mach/cpufreq.h>
+#include <mach/cputype.h>
+#include <mach/da8xx.h>
+#include <mach/irqs.h>
#include <mach/pm.h>
+#include <mach/time.h>
-#include "clock.h"
#include "mux.h"
+#ifndef CONFIG_COMMON_CLK
+#include "clock.h"
+#include "psc.h"
+#endif
+
#define DA850_PLL1_BASE 0x01e1a000
#define DA850_TIMER64P2_BASE 0x01f0c000
#define DA850_TIMER64P3_BASE 0x01f0d000
#define DA850_REF_FREQ 24000000
-#define CFGCHIP3_ASYNC3_CLKSRC BIT(4)
-#define CFGCHIP3_PLL1_MASTER_LOCK BIT(5)
-#define CFGCHIP0_PLL_MASTER_LOCK BIT(4)
-
+#ifndef CONFIG_COMMON_CLK
static int da850_set_armrate(struct clk *clk, unsigned long rate);
static int da850_round_armrate(struct clk *clk, unsigned long rate);
static int da850_set_pll0rate(struct clk *clk, unsigned long armrate);
@@ -583,6 +588,7 @@ static struct clk_lookup da850_clks[] = {
CLK("ecap.2", "fck", &ecap2_clk),
CLK(NULL, NULL, NULL),
};
+#endif
/*
* Device specific mux setup
@@ -1170,6 +1176,7 @@ int da850_register_cpufreq(char *async_clk)
return platform_device_register(&da850_cpufreq_device);
}
+#ifndef CONFIG_COMMON_CLK
static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
int ret = 0, diff;
@@ -1232,12 +1239,14 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long rate)
return 0;
}
+#endif /* CONFIG_COMMON_CLK */
#else
int __init da850_register_cpufreq(char *async_clk)
{
return 0;
}
+#ifndef CONFIG_COMMON_CLK
static int da850_set_armrate(struct clk *clk, unsigned long rate)
{
return -EINVAL;
@@ -1252,6 +1261,7 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
return clk->rate;
}
+#endif /* CONFIG_COMMON_CLK */
#endif
/* VPIF resource, platform data */
@@ -1395,6 +1405,44 @@ void __init da850_init(void)
void __init da850_init_time(void)
{
+#ifdef CONFIG_COMMON_CLK
+ void __iomem *pll0, *pll1, *psc0, *psc1;
+ struct clk *clk;
+ struct clk_hw *parent;
+
+ pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K);
+ pll1 = ioremap(DA850_PLL1_BASE, SZ_4K);
+ psc0 = ioremap(DA8XX_PSC0_BASE, SZ_4K);
+ psc1 = ioremap(DA8XX_PSC1_BASE, SZ_4K);
+
+ clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ);
+ da850_pll_clk_init(pll0, pll1);
+ clk = clk_register_mux(NULL, "async3",
+ (const char * const[]){ "pll0_sysclk2", "pll1_sysclk2" },
+ 2, 0, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG),
+ ilog2(CFGCHIP3_ASYNC3_CLKSRC), 1, 0, NULL);
+ /* pll1_sysclk2 is not affected by CPU scaling, so use it for async3 */
+ parent = clk_hw_get_parent_by_index(__clk_get_hw(clk), 1);
+ if (parent)
+ clk_set_parent(clk, parent->clk);
+ else
+ pr_warn("%s: Failed to find async3 parent clock\n", __func__);
+ da850_psc_clk_init(psc0, psc1);
+ clk = clk_register_fixed_factor(NULL, "i2c0", "pll0_aux_clk", 0, 1, 1);
+ clk_register_clkdev(clk, NULL, "i2c_davinci.1");
+ clk = clk_register_fixed_factor(NULL, "timer0", "pll0_aux_clk", 0, 1, 1);
+ clk_register_clkdev(clk, "timer0", NULL);
+ clk = clk_register_fixed_factor(NULL, "timer1", "pll0_aux_clk", 0, 1, 1);
+ clk_register_clkdev(clk, NULL, "davinci-wdt");
+ clk = clk_register_fixed_factor(NULL, "rmii", "pll0_sysclk7", 0, 1, 1);
+ clk_register_clkdev(clk, "rmii", NULL);
+ clk = clk_register_gate(NULL, "ehrpwm_tbclk", "ehrpwm", 0,
+ DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG),
+ ilog2(CFGCHIP1_TBCLKSYNC), 0, NULL);
+ clk_register_clkdev(clk, "tbclk", "ehrpwm.0");
+ clk_register_clkdev(clk, "tbclk", "ehrpwm.1");
+#else
davinci_clk_init(da850_clks);
+#endif
davinci_timer_init();
}
--
2.7.4
next prev parent reply other threads:[~2018-01-08 2:17 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-08 2:16 [PATCH v5 00/44] ARM: davinci: convert to common clock framework David Lechner
2018-01-08 2:17 ` [PATCH v5 01/44] dt-bindings: clock: Add new bindings for TI Davinci PLL clocks David Lechner
2018-01-08 14:00 ` Sekhar Nori
2018-01-08 16:29 ` David Lechner
2018-01-09 12:35 ` Sekhar Nori
2018-01-10 3:01 ` David Lechner
2018-01-10 18:52 ` Sekhar Nori
2018-01-10 22:24 ` Adam Ford
2018-01-11 2:50 ` David Lechner
2018-01-11 12:45 ` Adam Ford
2018-01-11 15:47 ` Sekhar Nori
2018-01-11 16:14 ` Adam Ford
2018-01-11 17:22 ` David Lechner
2018-01-11 18:09 ` Adam Ford
2018-01-11 18:29 ` David Lechner
2018-01-11 18:50 ` Adam Ford
2018-01-11 20:04 ` David Lechner
2018-01-11 20:58 ` Adam Ford
2018-01-11 21:04 ` David Lechner
2018-01-11 21:34 ` Adam Ford
2018-01-11 21:46 ` David Lechner
2018-01-12 6:03 ` Sekhar Nori
2018-01-11 23:20 ` David Lechner
2018-01-11 2:54 ` David Lechner
2018-01-08 2:17 ` [PATCH v5 02/44] clk: davinci: New driver for davinci " David Lechner
2018-01-12 9:21 ` Sekhar Nori
2018-01-12 15:25 ` David Lechner
2018-01-12 15:30 ` Adam Ford
2018-01-12 15:48 ` David Lechner
2018-01-12 16:18 ` Sekhar Nori
2018-01-13 1:11 ` David Lechner
2018-01-16 6:48 ` Sekhar Nori
2018-01-13 2:13 ` David Lechner
2018-01-16 6:32 ` Sekhar Nori
2018-01-08 2:17 ` [PATCH v5 03/44] clk: davinci: Add platform information for TI DA830 PLL David Lechner
2018-01-12 9:41 ` Sekhar Nori
2018-01-08 2:17 ` [PATCH v5 04/44] clk: davinci: Add platform information for TI DA850 PLL David Lechner
2018-01-08 2:17 ` [PATCH v5 05/44] clk: davinci: Add platform information for TI DM355 PLL David Lechner
2018-01-08 2:17 ` [PATCH v5 06/44] clk: davinci: Add platform information for TI DM365 PLL David Lechner
2018-01-08 2:17 ` [PATCH v5 07/44] clk: davinci: Add platform information for TI DM644x PLL David Lechner
2018-01-08 2:17 ` [PATCH v5 08/44] clk: davinci: Add platform information for TI DM646x PLL David Lechner
2018-01-08 2:17 ` [PATCH v5 09/44] dt-bindings: clock: New bindings for TI Davinci PSC David Lechner
2018-01-11 21:22 ` Rob Herring
2018-01-08 2:17 ` [PATCH v5 10/44] clk: davinci: New driver for davinci PSC clocks David Lechner
[not found] ` <e0a9af55-a8b1-c359-fe88-d038648e02f1@ti.com>
[not found] ` <83f3d207-9645-cbdf-d6cf-b6e6a8458abe@lechnology.com>
2018-01-17 12:25 ` Sekhar Nori
2018-01-17 17:28 ` David Lechner
2018-01-08 2:17 ` [PATCH v5 11/44] clk: davinci: Add platform information for TI DA830 PSC David Lechner
[not found] ` <91fe16dc-907e-6dbb-c8db-c27561132093@ti.com>
[not found] ` <4dd36ca7-e41d-58d8-ec8c-787978307943@lechnology.com>
2018-01-17 12:18 ` Sekhar Nori
2018-01-17 17:32 ` David Lechner
2018-01-18 7:53 ` Sekhar Nori
2018-01-08 2:17 ` [PATCH v5 12/44] clk: davinci: Add platform information for TI DA850 PSC David Lechner
[not found] ` <8d09dba6-9b1d-e06e-8730-256b8a4320db@ti.com>
[not found] ` <b6baa17e-1239-c209-9eca-52e5da73e921@lechnology.com>
2018-01-17 11:57 ` Sekhar Nori
2018-01-17 17:33 ` David Lechner
2018-01-17 19:08 ` David Lechner
2018-01-18 6:37 ` Sekhar Nori
2018-02-09 16:22 ` Bartosz Golaszewski
2018-02-09 16:48 ` Michael Turquette
2018-02-12 3:03 ` David Lechner
2018-04-05 13:09 ` Sekhar Nori
2018-04-05 13:44 ` Bartosz Golaszewski
2018-04-05 14:36 ` Sekhar Nori
2018-04-05 15:37 ` David Lechner
2018-04-05 15:51 ` Bartosz Golaszewski
2018-04-06 9:37 ` Sekhar Nori
2018-04-06 16:46 ` Stephen Boyd
2018-04-23 14:59 ` David Lechner
2018-04-24 8:28 ` Sekhar Nori
2018-04-24 16:11 ` David Lechner
2018-04-25 6:07 ` Sekhar Nori
2018-04-25 10:09 ` Bartosz Golaszewski
2018-04-25 10:26 ` Bartosz Golaszewski
2018-01-08 2:17 ` [PATCH v5 13/44] clk: davinci: Add platform information for TI DM355 PSC David Lechner
2018-01-08 2:17 ` [PATCH v5 14/44] clk: davinci: Add platform information for TI DM365 PSC David Lechner
2018-01-08 2:17 ` [PATCH v5 15/44] clk: davinci: Add platform information for TI DM644x PSC David Lechner
2018-01-17 13:57 ` Sekhar Nori
2018-01-08 2:17 ` [PATCH v5 16/44] clk: davinci: Add platform information for TI DM646x PSC David Lechner
2018-01-17 14:59 ` Sekhar Nori
2018-01-08 2:17 ` [PATCH v5 17/44] dt-bindings: clock: Add bindings for DA8XX CFGCHIP gate clocks David Lechner
2018-01-11 21:45 ` Rob Herring
2018-01-11 21:51 ` David Lechner
2018-01-08 2:17 ` [PATCH v5 18/44] dt-bindings: clock: Add binding for TI DA8XX CFGCHIP mux clocks David Lechner
2018-01-08 2:17 ` [PATCH v5 19/44] clk: davinci: New driver for TI DA8XX CFGCHIP clocks David Lechner
2018-01-17 15:31 ` Sekhar Nori
2018-01-17 17:35 ` David Lechner
2018-01-08 2:17 ` [PATCH v5 20/44] dt-bindings: clock: Add bindings for TI DA8XX USB PHY clocks David Lechner
2018-01-18 12:10 ` Sekhar Nori
2018-01-18 19:00 ` David Lechner
2018-01-19 6:17 ` Sekhar Nori
2018-01-08 2:17 ` [PATCH v5 21/44] clk: davinci: New driver " David Lechner
2018-01-18 13:05 ` Sekhar Nori
2018-01-18 18:49 ` David Lechner
2018-01-19 5:04 ` Sekhar Nori
2018-01-08 2:17 ` [PATCH v5 22/44] ARM: davinci: move davinci_clk_init() to init_time David Lechner
2018-01-08 2:17 ` [PATCH v5 23/44] ARM: da830: add new clock init using common clock framework David Lechner
2018-01-08 2:17 ` David Lechner [this message]
2018-01-18 15:24 ` [PATCH v5 24/44] ARM: da850: " Sekhar Nori
2018-01-08 2:17 ` [PATCH v5 25/44] ARM: dm355: " David Lechner
2018-01-08 2:17 ` [PATCH v5 26/44] ARM: dm365: " David Lechner
2018-01-08 2:17 ` [PATCH v5 27/44] ARM: dm644x: " David Lechner
2018-01-08 2:17 ` [PATCH v5 28/44] ARM: dm646x: " David Lechner
2018-01-08 2:17 ` [PATCH v5 29/44] ARM: da8xx: add new USB PHY " David Lechner
2018-01-18 15:14 ` Sekhar Nori
2018-01-18 18:43 ` David Lechner
2018-01-19 5:08 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515377863-20358-25-git-send-email-david@lechnology.com \
--to=david@lechnology.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).