From mboxrd@z Thu Jan 1 00:00:00 1970 From: daniel.lezcano@linaro.org (Daniel Lezcano) Date: Mon, 8 Jan 2018 14:28:52 +0100 Subject: [PATCH 13/20] clocksource/drivers/stm32: Use the node name as timer name In-Reply-To: <1515418139-23276-1-git-send-email-daniel.lezcano@linaro.org> References: <1bbaef2e-4080-3f54-7db3-a8989acfd691@free.fr> <1515418139-23276-1-git-send-email-daniel.lezcano@linaro.org> Message-ID: <1515418139-23276-13-git-send-email-daniel.lezcano@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org As there are different timers on the stm32, use the node name for the timer name in order to give the indication of which timer the kernel is using. The /proc/timer_list gives all the information with the right name, otherwise we end up digging in the kernel log and /proc/interrupt to do the connection between the used timer. Signed-off-by: Daniel Lezcano Tested-by: Benjamin Gaignard Acked-by: Benjamin Gaignard --- drivers/clocksource/timer-stm32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c index 3e4ab07..14b7a2b 100644 --- a/drivers/clocksource/timer-stm32.c +++ b/drivers/clocksource/timer-stm32.c @@ -85,7 +85,7 @@ static void __init stm32_clockevent_init(struct timer_of *to) unsigned long max_delta; int prescaler; - to->clkevt.name = "stm32_clockevent"; + to->clkevt.name = to->np->full_name; to->clkevt.features = CLOCK_EVT_FEAT_PERIODIC; to->clkevt.set_state_shutdown = stm32_clock_event_shutdown; to->clkevt.set_state_periodic = stm32_clock_event_set_periodic; -- 2.7.4