From: smitha.t@samsung.com (Smitha T Murthy)
To: linux-arm-kernel@lists.infradead.org
Subject: [Patch v6 00/12] Add MFC v10.10 support
Date: Tue, 23 Jan 2018 11:11:06 +0530 [thread overview]
Message-ID: <1516686066.12482.148.camel@smitha-fedora> (raw)
In-Reply-To: <126f1982-060a-6fdb-e1b3-b5c81d65ca13@xs4all.nl>
On Mon, 2018-01-22 at 13:18 +0100, Hans Verkuil wrote:
> Hi Smitha,
>
> Thank you for this v6 series!
>
> You can add my:
>
> Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
>
> to patches 1-9 and 11. See my review for patches 10 and 12. The comments
> are minor, so I hope I can Ack v7 once it's posted and this can be merged
> for 4.17.
>
> Regards,
>
> Hans
>
Thank you so much for the review.
I will update the same by this week and post.
Regards,
Smitha
> On 08/12/17 10:08, Smitha T Murthy wrote:
> > This patch series adds MFC v10.10 support. MFC v10.10 is used in some
> > of Exynos7 variants.
> >
> > This adds support for following:
> >
> > * Add support for HEVC encoder and decoder
> > * Add support for VP9 decoder
> > * Update Documentation for control id definitions
> > * Update computation of min scratch buffer size requirement for V8 onwards
> >
> > Changes since v5:
> > - Addressed review comments by Kamil Debski <kamil@wypas.org>.
> > - Addressed review comments by
> > Stanimir Varbanov <stanimir.varbanov@linaro.org>.
> > - Addressed review comments by Hans Verkuil <hverkuil@xs4all.nl>.
> > - Rebased on latest git://linuxtv.org/snawrocki/samsung.git
> > for-v4.15/media/next.
> > - Applied r-o-b from Andrzej, Stanimir on respective patches.
> > - Applied acked-by from Kamil, Hans on respective patches.
> >
> > Smitha T Murthy (12):
> > [media] s5p-mfc: Rename IS_MFCV8 macro
> > [media] s5p-mfc: Adding initial support for MFC v10.10
> > [media] s5p-mfc: Use min scratch buffer size as provided by F/W
> > [media] s5p-mfc: Support MFCv10.10 buffer requirements
> > [media] videodev2.h: Add v4l2 definition for HEVC
> > [media] v4l2-ioctl: add HEVC format description
> > Documentation: v4l: Documentation for HEVC v4l2 definition
> > [media] s5p-mfc: Add support for HEVC decoder
> > [media] s5p-mfc: Add VP9 decoder support
> > [media] v4l2: Add v4l2 control IDs for HEVC encoder
> > [media] s5p-mfc: Add support for HEVC encoder
> > Documention: v4l: Documentation for HEVC CIDs
> >
> > .../devicetree/bindings/media/s5p-mfc.txt | 1 +
> > Documentation/media/uapi/v4l/extended-controls.rst | 395 +++++++++++++++
> > Documentation/media/uapi/v4l/pixfmt-compressed.rst | 5 +
> > drivers/media/platform/s5p-mfc/regs-mfc-v10.h | 88 ++++
> > drivers/media/platform/s5p-mfc/regs-mfc-v8.h | 2 +
> > drivers/media/platform/s5p-mfc/s5p_mfc.c | 28 ++
> > drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c | 9 +
> > drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 68 ++-
> > drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 6 +-
> > drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 48 +-
> > drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 555 ++++++++++++++++++++-
> > drivers/media/platform/s5p-mfc/s5p_mfc_opr.h | 14 +
> > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 397 +++++++++++++--
> > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.h | 15 +
> > drivers/media/v4l2-core/v4l2-ctrls.c | 118 +++++
> > drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
> > include/uapi/linux/v4l2-controls.h | 92 +++-
> > include/uapi/linux/videodev2.h | 1 +
> > 18 files changed, 1765 insertions(+), 78 deletions(-)
> > create mode 100644 drivers/media/platform/s5p-mfc/regs-mfc-v10.h
> >
>
>
>
prev parent reply other threads:[~2018-01-23 5:41 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20171208093612epcas1p1eda138655cf5397893fe1f2b2152bd1f@epcas1p1.samsung.com>
2017-12-08 9:08 ` [Patch v6 00/12] Add MFC v10.10 support Smitha T Murthy
2017-12-08 9:08 ` [Patch v6 01/12] [media] s5p-mfc: Rename IS_MFCV8 macro Smitha T Murthy
2017-12-08 9:08 ` [Patch v6 02/12] [media] s5p-mfc: Adding initial support for MFC v10.10 Smitha T Murthy
2017-12-08 13:25 ` Philippe Ombredanne
2018-01-18 12:36 ` Smitha T Murthy
2018-01-18 13:19 ` Hans Verkuil
2017-12-08 9:08 ` [Patch v6 03/12] [media] s5p-mfc: Use min scratch buffer size as provided by F/W Smitha T Murthy
2017-12-08 9:08 ` [Patch v6 04/12] [media] s5p-mfc: Support MFCv10.10 buffer requirements Smitha T Murthy
2017-12-08 9:08 ` [Patch v6 05/12] [media] videodev2.h: Add v4l2 definition for HEVC Smitha T Murthy
2017-12-08 15:47 ` Nicolas Dufresne
2017-12-08 16:07 ` Mauro Carvalho Chehab
2017-12-08 9:08 ` [Patch v6 06/12] [media] v4l2-ioctl: add HEVC format description Smitha T Murthy
2017-12-08 9:08 ` [Patch v6 07/12] Documentation: v4l: Documentation for HEVC v4l2 definition Smitha T Murthy
2017-12-08 9:08 ` [Patch v6 08/12] [media] s5p-mfc: Add support for HEVC decoder Smitha T Murthy
2017-12-08 9:08 ` [Patch v6 09/12] [media] s5p-mfc: Add VP9 decoder support Smitha T Murthy
2017-12-08 9:08 ` [Patch v6 10/12] [media] v4l2: Add v4l2 control IDs for HEVC encoder Smitha T Murthy
2017-12-09 18:48 ` Stanimir Varbanov
2017-12-12 2:34 ` Smitha T Murthy
2017-12-12 9:46 ` Sylwester Nawrocki
2017-12-13 8:30 ` Smitha T Murthy
2018-01-22 11:08 ` Hans Verkuil
2018-01-23 4:24 ` Smitha T Murthy
2017-12-08 9:08 ` [Patch v6 11/12] [media] s5p-mfc: Add support " Smitha T Murthy
2017-12-08 9:08 ` [Patch v6 12/12] Documention: v4l: Documentation for HEVC CIDs Smitha T Murthy
2018-01-22 12:15 ` Hans Verkuil
2018-01-23 5:40 ` Smitha T Murthy
2018-01-22 12:18 ` [Patch v6 00/12] Add MFC v10.10 support Hans Verkuil
2018-01-23 5:41 ` Smitha T Murthy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516686066.12482.148.camel@smitha-fedora \
--to=smitha.t@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).