[PATCH 2/2] ARM: dts: imx6sx: add ARM power domain support

Dong Aisheng
2018-01-25T10:33:16Z

On Wed, Jan 24, 2018 at 12:42:14AM +0800, Anson Huang wrote:
> Add ARM power domain in PGC.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> this patch should be based on 0001-ARM-dts-imx6sx-add-pu-power-domain-support.patch
> arch/arm/boot/dts/imx6sx.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
> index 42ef4c6..aa29ca6 100644
> --- a/arch/arm/boot/dts/imx6sx.dtsi
> +++ b/arch/arm/boot/dts/imx6sx.dtsi
> @@ -768,6 +768,11 @@
> #address-cells = <1>;
> #size-cells = <0>;
>
> + power-domain at 0 {

Nitpick: probably an 'arm' prefix is better:
arm: power-domain at 0

Anyway, it's minor depends on maintainer's perference.

Otherwise, looks fine

Acked-by: Dong Aisheng <aisheng.dong@nxp.com>

Regards
Dong Aisheng

> + reg = <0>;
> + #power-domain-cells = <0>;
> + };
> +
> pd_pu: power-domain at 1 {
> reg = <1>;
> #power-domain-cells = <0>;
> --
> 2.7.4
>