From mboxrd@z Thu Jan 1 00:00:00 1970 From: festevam@gmail.com (Fabio Estevam) Date: Fri, 2 Feb 2018 21:26:39 -0200 Subject: [PATCH v2] ARM: dts: imx27-eukrea-cpuimx27: Put the clock node directly into root Message-ID: <1517613999-6467-1-git-send-email-festevam@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Fabio Estevam Put the UART clock node directly under root with a unique node name and drop unit-address in order to fix the following build warning with W=1: arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dtb: Warning (simple_bus_reg): Node /clocks/osc26m missing or empty reg/ranges property Signed-off-by: Fabio Estevam --- Changes since v1: - Put the UART clock node directly under root (Shawn) arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi index 2cf896c..6671a80 100644 --- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi +++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi @@ -20,17 +20,10 @@ reg = <0xa0000000 0x04000000>; }; - clocks { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; - - clk14745600: clock at 0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <14745600>; - reg = <0>; - }; + clk14745600: clk-uart { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <14745600>; }; }; -- 2.7.4