* [PATCH 2/7] arm64: dts: ls1043a: Move cpu_thermal out of bus node
2018-02-05 18:45 [PATCH 1/7] arm64: dts: ls1012a: Move cpu_thermal out of bus node Fabio Estevam
@ 2018-02-05 18:45 ` Fabio Estevam
2018-02-05 18:45 ` [PATCH 3/7] arm64: dts: ls1046a: " Fabio Estevam
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Fabio Estevam @ 2018-02-05 18:45 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Move cpu_thermal node from soc node to root node.
cpu_thermal node does not have any register properties and thus
shouldn't be placed on the bus.
This fixes the following build warnings with W=1:
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 62 +++++++++++++-------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 380e7c7..4d15e11 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -159,6 +159,37 @@
mask = <0x02>;
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&tmu 3>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0xf08>, /* Physical Secure PPI */
@@ -342,37 +373,6 @@
#thermal-sensor-cells = <1>;
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
-
- thermal-sensors = <&tmu 3>;
-
- trips {
- cpu_alert: cpu-alert {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit: cpu-crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
qman: qman at 1880000 {
compatible = "fsl,qman";
reg = <0x0 0x1880000 0x0 0x10000>;
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 3/7] arm64: dts: ls1046a: Move cpu_thermal out of bus node
2018-02-05 18:45 [PATCH 1/7] arm64: dts: ls1012a: Move cpu_thermal out of bus node Fabio Estevam
2018-02-05 18:45 ` [PATCH 2/7] arm64: dts: ls1043a: " Fabio Estevam
@ 2018-02-05 18:45 ` Fabio Estevam
2018-02-05 18:45 ` [PATCH 4/7] arm64: dts: ls1088a: " Fabio Estevam
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Fabio Estevam @ 2018-02-05 18:45 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Move cpu_thermal node from soc node to root node.
cpu_thermal node does not have any register properties and thus
shouldn't be placed on the bus.
This fixes the following build warnings with W=1:
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 62 +++++++++++++-------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 06b5e12..3f8b62010 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -147,6 +147,37 @@
mask = <0x02>;
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 3>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) |
@@ -362,37 +393,6 @@
#thermal-sensor-cells = <1>;
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
- thermal-sensors = <&tmu 3>;
-
- trips {
- cpu_alert: cpu-alert {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit: cpu-crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
dspi: dspi at 2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 4/7] arm64: dts: ls1088a: Move cpu_thermal out of bus node
2018-02-05 18:45 [PATCH 1/7] arm64: dts: ls1012a: Move cpu_thermal out of bus node Fabio Estevam
2018-02-05 18:45 ` [PATCH 2/7] arm64: dts: ls1043a: " Fabio Estevam
2018-02-05 18:45 ` [PATCH 3/7] arm64: dts: ls1046a: " Fabio Estevam
@ 2018-02-05 18:45 ` Fabio Estevam
2018-02-05 18:45 ` [PATCH 5/7] arm64: dts: ls208xa: " Fabio Estevam
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Fabio Estevam @ 2018-02-05 18:45 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Move cpu_thermal node from soc node to root node.
cpu_thermal node does not have any register properties and thus
shouldn't be placed on the bus.
This fixes the following build warnings with W=1:
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 76 +++++++++++++-------------
1 file changed, 38 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index bd80e9a..bbbfd53 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -158,6 +158,44 @@
};
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu4 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
@@ -238,44 +276,6 @@
#thermal-sensor-cells = <1>;
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
- thermal-sensors = <&tmu 0>;
-
- trips {
- cpu_alert: cpu-alert {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit: cpu-crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
-
- map1 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu4 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
duart0: serial at 21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 5/7] arm64: dts: ls208xa: Move cpu_thermal out of bus node
2018-02-05 18:45 [PATCH 1/7] arm64: dts: ls1012a: Move cpu_thermal out of bus node Fabio Estevam
` (2 preceding siblings ...)
2018-02-05 18:45 ` [PATCH 4/7] arm64: dts: ls1088a: " Fabio Estevam
@ 2018-02-05 18:45 ` Fabio Estevam
2018-02-05 18:45 ` [PATCH 6/7] arm64: dts: ls208xa-qds: Pass unit name to dspi child nodes Fabio Estevam
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Fabio Estevam @ 2018-02-05 18:45 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Move cpu_thermal node from soc node to root node.
cpu_thermal node does not have any register properties and thus
shouldn't be placed on the bus.
This fixes the following build warnings with W=1:
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 98 +++++++++++++-------------
1 file changed, 49 insertions(+), 49 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index f3a40af..137ef4d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -111,6 +111,55 @@
mask = <0x2>;
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&tmu 4>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu-crit {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu2 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map2 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu4 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map3 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu6 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
@@ -194,55 +243,6 @@
#thermal-sensor-cells = <1>;
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
-
- thermal-sensors = <&tmu 4>;
-
- trips {
- cpu_alert: cpu-alert {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit: cpu-crit {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- map1 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu2 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- map2 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu4 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- map3 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu6 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
serial0: serial at 21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 6/7] arm64: dts: ls208xa-qds: Pass unit name to dspi child nodes
2018-02-05 18:45 [PATCH 1/7] arm64: dts: ls1012a: Move cpu_thermal out of bus node Fabio Estevam
` (3 preceding siblings ...)
2018-02-05 18:45 ` [PATCH 5/7] arm64: dts: ls208xa: " Fabio Estevam
@ 2018-02-05 18:45 ` Fabio Estevam
2018-02-05 18:45 ` [PATCH 7/7] arm64: ls208xa-qds: Fix the 'reg' property Fabio Estevam
2018-02-08 7:20 ` [PATCH 1/7] arm64: dts: ls1012a: Move cpu_thermal out of bus node Shawn Guo
6 siblings, 0 replies; 8+ messages in thread
From: Fabio Estevam @ 2018-02-05 18:45 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
Pass unit name to dspi child nodes to fix the following build warnings
with W=1:
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dtb: Warning (unit_address_vs_reg): Node /soc/dspi at 2100000/n25q128a has a reg or ranges property, but no unit name
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dtb: Warning (unit_address_vs_reg): Node /soc/dspi at 2100000/sst25wf040b has a reg or ranges property, but no unit name
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dtb: Warning (unit_address_vs_reg): Node /soc/dspi at 2100000/en25s64 has a reg or ranges property, but no unit name
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index b237446..a1a5ccb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -140,21 +140,21 @@
&dspi {
status = "okay";
- dflash0: n25q128a {
+ dflash0: n25q128a at 0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <0>;
};
- dflash1: sst25wf040b {
+ dflash1: sst25wf040b at 1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <1>;
};
- dflash2: en25s64 {
+ dflash2: en25s64 at 2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 7/7] arm64: ls208xa-qds: Fix the 'reg' property
2018-02-05 18:45 [PATCH 1/7] arm64: dts: ls1012a: Move cpu_thermal out of bus node Fabio Estevam
` (4 preceding siblings ...)
2018-02-05 18:45 ` [PATCH 6/7] arm64: dts: ls208xa-qds: Pass unit name to dspi child nodes Fabio Estevam
@ 2018-02-05 18:45 ` Fabio Estevam
2018-02-08 7:20 ` [PATCH 1/7] arm64: dts: ls1012a: Move cpu_thermal out of bus node Shawn Guo
6 siblings, 0 replies; 8+ messages in thread
From: Fabio Estevam @ 2018-02-05 18:45 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
The 'reg' property should match the corresponding @ address, so
fix it accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index a1a5ccb..1de6188 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -177,7 +177,7 @@
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <20000000>;
- reg = <0>;
+ reg = <2>;
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 1/7] arm64: dts: ls1012a: Move cpu_thermal out of bus node
2018-02-05 18:45 [PATCH 1/7] arm64: dts: ls1012a: Move cpu_thermal out of bus node Fabio Estevam
` (5 preceding siblings ...)
2018-02-05 18:45 ` [PATCH 7/7] arm64: ls208xa-qds: Fix the 'reg' property Fabio Estevam
@ 2018-02-08 7:20 ` Shawn Guo
6 siblings, 0 replies; 8+ messages in thread
From: Shawn Guo @ 2018-02-08 7:20 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Feb 05, 2018 at 04:45:32PM -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
>
> Move cpu_thermal node from soc node to root node.
>
> cpu_thermal node does not have any register properties and thus
> shouldn't be placed on the bus.
>
> This fixes the following build warnings with W=1:
>
> arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
>
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Applied all, thanks.
^ permalink raw reply [flat|nested] 8+ messages in thread