From: ilialin@codeaurora.org (Ilia Lin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/10] clk: qcom: CPU clock driver for msm8996
Date: Wed, 14 Feb 2018 15:59:42 +0200 [thread overview]
Message-ID: <1518616792-29028-1-git-send-email-ilialin@codeaurora.org> (raw)
[v3]
* Rebased on top of the latest PLL driver changes
* Addressed comment from Rob Herring for bindings
This series adds support for the CPU clocks on msm8996 devices.
The driver uses the existing PLL drivers and is required
to control the CPU frequency scaling on the MSM8996.
A previous post of RFC can be found here
https://patchwork.kernel.org/patch/10144485/
Ilia Lin (6):
soc: qcom: Separate kryo l2 accessors from PMU driver
clk: qcom: Add DT bindings for CPU clock driver for msm8996
clk: qcom: clk-cpu-8996: Prepare PLLs on probe
clk: qcom: Add ACD path to CPU clock driver for msm8996
DT: QCOM: Add cpufreq-dt to msm8996
DT: QCOM: Add thermal mitigation to msm8996
Rajendra Nayak (4):
clk: qcom: Make clk_alpha_pll_configure available to modules
clk: qcom: Add CPU clock driver for msm8996
clk: qcom: cpu-8996: Add support to switch to alternate PLL
clk: qcom: cpu-8996: Add support to switch below 600Mhz
.../devicetree/bindings/clock/qcom,kryocc.txt | 17 +
arch/arm64/Kconfig.platforms | 7 +
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 4 +-
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 286 ++++++++++-
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-alpha-pll.c | 1 +
drivers/clk/qcom/clk-cpu-8996.c | 554 +++++++++++++++++++++
drivers/cpufreq/cpufreq-dt-platdev.c | 3 +
drivers/perf/qcom_l2_pmu.c | 50 +-
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/kryo-l2-accessors.c | 64 +++
include/soc/qcom/kryo-l2-accessors.h | 22 +
14 files changed, 956 insertions(+), 64 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,kryocc.txt
create mode 100644 drivers/clk/qcom/clk-cpu-8996.c
create mode 100644 drivers/soc/qcom/kryo-l2-accessors.c
create mode 100644 include/soc/qcom/kryo-l2-accessors.h
--
1.9.1
next reply other threads:[~2018-02-14 13:59 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-14 13:59 Ilia Lin [this message]
2018-02-14 13:59 ` [PATCH v3 01/10] soc: qcom: Separate kryo l2 accessors from PMU driver Ilia Lin
2018-03-19 17:45 ` Stephen Boyd
2018-03-20 18:42 ` ilialin at codeaurora.org
2018-02-14 13:59 ` [PATCH v3 02/10] clk: qcom: Make clk_alpha_pll_configure available to modules Ilia Lin
2018-03-19 17:45 ` Stephen Boyd
2018-02-14 13:59 ` [PATCH v3 03/10] clk: qcom: Add CPU clock driver for msm8996 Ilia Lin
2018-03-19 17:36 ` Stephen Boyd
2018-03-20 14:18 ` ilialin at codeaurora.org
2018-03-20 20:01 ` Stephen Boyd
2018-03-22 10:47 ` ilialin at codeaurora.org
2018-04-06 18:18 ` Stephen Boyd
2018-02-14 13:59 ` [PATCH v3 04/10] clk: qcom: Add DT bindings for " Ilia Lin
2018-02-19 3:12 ` Rob Herring
2018-03-19 17:46 ` Stephen Boyd
2018-03-20 18:43 ` ilialin at codeaurora.org
2018-02-14 13:59 ` [PATCH v3 05/10] clk: qcom: cpu-8996: Add support to switch to alternate PLL Ilia Lin
2018-03-19 17:47 ` Stephen Boyd
2018-03-20 18:45 ` ilialin at codeaurora.org
2018-02-14 13:59 ` [PATCH v3 06/10] clk: qcom: cpu-8996: Add support to switch below 600Mhz Ilia Lin
2018-03-19 17:49 ` Stephen Boyd
2018-02-14 13:59 ` [PATCH v3 07/10] clk: qcom: clk-cpu-8996: Prepare PLLs on probe Ilia Lin
2018-03-19 16:50 ` Stephen Boyd
2018-03-20 13:53 ` ilialin at codeaurora.org
2018-03-20 20:03 ` Stephen Boyd
2018-02-14 13:59 ` [PATCH v3 08/10] clk: qcom: Add ACD path to CPU clock driver for msm8996 Ilia Lin
2018-03-19 16:57 ` Stephen Boyd
2018-03-19 18:16 ` Robin Murphy
2018-03-19 21:21 ` Stephen Boyd
2018-03-22 18:56 ` Robin Murphy
2018-03-20 14:04 ` ilialin at codeaurora.org
2018-03-20 20:04 ` Stephen Boyd
2018-02-14 13:59 ` [PATCH v3 09/10] DT: QCOM: Add cpufreq-dt to msm8996 Ilia Lin
2018-03-19 16:48 ` Stephen Boyd
2018-03-20 13:46 ` ilialin at codeaurora.org
2018-03-20 20:06 ` Stephen Boyd
2018-03-20 20:34 ` ilialin at codeaurora.org
2018-03-20 21:46 ` Stephen Boyd
2018-02-14 13:59 ` [PATCH v3 10/10] DT: QCOM: Add thermal mitigation " Ilia Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1518616792-29028-1-git-send-email-ilialin@codeaurora.org \
--to=ilialin@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).