From mboxrd@z Thu Jan 1 00:00:00 1970 From: amelie.delaunay@st.com (Amelie Delaunay) Date: Fri, 2 Mar 2018 15:56:23 +0100 Subject: [PATCH v3 0/2] Introduce STM32 USB PHY Controller driver Message-ID: <1520002585-13113-1-git-send-email-amelie.delaunay@st.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patchset adds support for STMicroelectronics STM32 USB PHY Controller (USBPHYC) which is embedded in STM32MP1 SoC. The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI switch that selects either USB OTG controller or USB Host controller for the second PHY port. --- Changes in v3: * Address Kishon comments: move to phy provider + child phy sub-nodes model. * Remove st,utmi-switch property as the information is now passed through phy cell for port#2. * Rework phy init/exit by extracting pll management in dedicated functions. * Make some clean-up around variable names and defines. Changes in v2: * Update diagram to better describe the context. * Change boolean dt propery st,port2-switch-to-host into u32 st,utmi-switch. * Silent phy creation failure in case of -EPROBE_DEFER. Amelie Delaunay (2): dt-bindings: phy: add support for STM32 USB PHY Controller (USBPHYC) phy: stm32: add support for STM32 USB PHY Controller (USBPHYC) .../devicetree/bindings/phy/phy-stm32-usbphyc.txt | 73 ++++ drivers/phy/st/Kconfig | 14 + drivers/phy/st/Makefile | 1 + drivers/phy/st/phy-stm32-usbphyc.c | 461 +++++++++++++++++++++ 4 files changed, 549 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt create mode 100644 drivers/phy/st/phy-stm32-usbphyc.c -- 2.7.4