From: ulf.hansson@linaro.org (Ulf Hansson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 13/25] drivers: firmware: psci: Split psci_dt_cpu_init_idle()
Date: Wed, 14 Mar 2018 17:58:23 +0100 [thread overview]
Message-ID: <1521046715-30683-14-git-send-email-ulf.hansson@linaro.org> (raw)
In-Reply-To: <1521046715-30683-1-git-send-email-ulf.hansson@linaro.org>
Let's split psci_dt_cpu_init_idle() function into two functions, as to
allow following changes to re-use some of the code.
Cc: Lina Iyer <ilina@codeaurora.org>
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/firmware/psci.c | 42 +++++++++++++++++++++++-------------------
1 file changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c
index c80ec1d..9788bfc 100644
--- a/drivers/firmware/psci.c
+++ b/drivers/firmware/psci.c
@@ -270,9 +270,26 @@ static int __init psci_features(u32 psci_func_id)
#ifdef CONFIG_CPU_IDLE
static DEFINE_PER_CPU_READ_MOSTLY(u32 *, psci_power_state);
+static int psci_dt_parse_state_node(struct device_node *np, u32 *state)
+{
+ int err = of_property_read_u32(np, "arm,psci-suspend-param", state);
+
+ if (err) {
+ pr_warn("%pOF missing arm,psci-suspend-param property\n", np);
+ return err;
+ }
+
+ if (!psci_power_state_is_valid(*state)) {
+ pr_warn("Invalid PSCI power state %#x\n", *state);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int psci_dt_cpu_init_idle(struct device_node *cpu_node, int cpu)
{
- int i, ret, count = 0;
+ int i, ret = 0, count = 0;
u32 *psci_states;
struct device_node *state_node;
@@ -291,29 +308,16 @@ static int psci_dt_cpu_init_idle(struct device_node *cpu_node, int cpu)
return -ENOMEM;
for (i = 0; i < count; i++) {
- u32 state;
-
state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+ ret = psci_dt_parse_state_node(state_node, &psci_states[i]);
+ of_node_put(state_node);
- ret = of_property_read_u32(state_node,
- "arm,psci-suspend-param",
- &state);
- if (ret) {
- pr_warn(" * %pOF missing arm,psci-suspend-param property\n",
- state_node);
- of_node_put(state_node);
+ if (ret)
goto free_mem;
- }
- of_node_put(state_node);
- pr_debug("psci-power-state %#x index %d\n", state, i);
- if (!psci_power_state_is_valid(state)) {
- pr_warn("Invalid PSCI power state %#x\n", state);
- ret = -EINVAL;
- goto free_mem;
- }
- psci_states[i] = state;
+ pr_debug("psci-power-state %#x index %d\n", psci_states[i], i);
}
+
/* Idle states parsed correctly, initialize per-cpu pointer */
per_cpu(psci_power_state, cpu) = psci_states;
return 0;
--
2.7.4
next prev parent reply other threads:[~2018-03-14 16:58 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-14 16:58 [PATCH v6 00/25] PM / Domains: Support hierarchical CPU arrangement (PSCI/ARM) Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 01/25] PM / Domains: Don't treat zero found compatible idle states as an error Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 02/25] PM / Domains: Deal with multiple states but no governor in genpd Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 03/25] PM / Domains: Add generic data pointer to genpd_power_state struct Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 04/25] PM / Domains: Add support for CPU devices to genpd Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 05/25] PM / Domains: Add helper functions to attach/detach CPUs to/from genpd Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 06/25] timer: Export next wakeup time of a CPU Ulf Hansson
2018-03-14 17:19 ` Mark Rutland
2018-03-14 16:58 ` [PATCH v6 07/25] PM / Domains: Add genpd governor for CPUs Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 08/25] PM / Domains: Extend genpd CPU governor to cope with QoS constraints Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 09/25] kernel/cpu_pm: Manage runtime PM in the idle path for CPUs Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 10/25] dt: psci: Update DT bindings to support hierarchical PSCI states Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 11/25] of: base: Add of_get_cpu_state_node() to get idle states for a CPU node Ulf Hansson
2018-03-18 12:51 ` Rob Herring
2018-03-14 16:58 ` [PATCH v6 12/25] cpuidle: dt: Support hierarchical CPU idle states Ulf Hansson
2018-03-14 16:58 ` Ulf Hansson [this message]
2018-03-14 16:58 ` [PATCH v6 14/25] drivers: firmware: psci: " Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 15/25] drivers: firmware: psci: Simplify error path of psci_dt_init() Ulf Hansson
2018-03-14 17:25 ` Mark Rutland
2018-03-14 16:58 ` [PATCH v6 16/25] drivers: firmware: psci: Announce support for OS initiated suspend mode Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 17/25] drivers: firmware: psci: Prepare to use " Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 18/25] drivers: firmware: psci: Share a few internal PSCI functions Ulf Hansson
2018-03-14 17:30 ` Mark Rutland
2018-03-14 16:58 ` [PATCH v6 19/25] drivers: firmware: psci: Add support for PM domains using genpd Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 20/25] drivers: firmware: psci: Introduce psci_dt_topology_init() Ulf Hansson
2018-03-14 17:38 ` Mark Rutland
2018-04-10 7:19 ` Ulf Hansson
2018-04-10 11:10 ` Mark Rutland
2018-04-10 12:25 ` Ulf Hansson
2018-04-18 11:32 ` Mark Rutland
2018-03-14 16:58 ` [PATCH v6 21/25] drivers: firmware: psci: Try to attach CPU devices to their PM domains Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 22/25] drivers: firmware: psci: Deal with CPU hotplug when using OSI mode Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 23/25] MAINTAINERS: Update files for PSCI Ulf Hansson
2018-03-14 17:40 ` Mark Rutland
2018-03-14 16:58 ` [PATCH v6 24/25] arm64: kernel: Respect the hierarchical CPU topology in DT " Ulf Hansson
2018-03-14 16:58 ` [PATCH v6 25/25] arm64: dts: Convert to the hierarchical CPU topology layout for MSM8916 Ulf Hansson
2018-03-14 17:19 ` [PATCH v6 00/25] PM / Domains: Support hierarchical CPU arrangement (PSCI/ARM) Mark Rutland
2018-03-15 14:19 ` Ulf Hansson
2018-03-15 11:00 ` Geert Uytterhoeven
2018-03-15 13:14 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521046715-30683-14-git-send-email-ulf.hansson@linaro.org \
--to=ulf.hansson@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).