From: sricharan@codeaurora.org (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 08/13] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
Date: Tue, 20 Mar 2018 09:28:51 +0530 [thread overview]
Message-ID: <1521518336-5467-9-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1521518336-5467-1-git-send-email-sricharan@codeaurora.org>
Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Add the common data for all dk07 based boards.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 83 +++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
new file mode 100644
index 0000000..37a2ea8
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1";
+ compatible = "qcom,ipq4019";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512MB */
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ rsvd1 at 87000000 {
+ /* Reserved for other subsystem */
+ reg = <0x87000000 0x500000>;
+ no-map;
+ };
+
+ wifi_dump at 87500000 {
+ reg = <0x87500000 0x600000>;
+ no-map;
+ };
+
+ rsvd2 at 87B00000 {
+ /* Reserved for other subsystem */
+ reg = <0x87B00000 0x500000>;
+ no-map;
+ };
+ };
+
+ soc {
+ pinctrl at 1000000 {
+ serial_0_pins: serial0_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ i2c_0_pins: i2c_0_pinmux {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "blsp_i2c0";
+ bias-disable;
+ };
+ };
+ };
+
+ serial at 78af000 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+
+ blsp_dma: dma at 7884000 {
+ status = "ok";
+ };
+
+ i2c_0: i2c at 78b7000 { /* BLSP1 QUP2 */
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+
+ qpic_bam: dma at 7984000 {
+ status = "ok";
+ };
+
+ nand: qpic-nand at 79b0000 {
+ status = "ok";
+ };
+ };
+};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2018-03-20 3:58 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-20 3:58 [PATCH v3 00/13] ARM: dts: ipq: updates to enable a few peripherals Sricharan R
2018-03-20 3:58 ` [PATCH v3 01/13] firmware: qcom: scm: Add ipq4019 soc compatible Sricharan R
2018-03-20 3:58 ` [PATCH v3 02/13] ARM: dts: ipq4019: Add a few peripheral nodes Sricharan R
2018-03-20 3:58 ` [PATCH v3 03/13] ARM: dts: ipq4019: Change the max opp frequency Sricharan R
2018-03-20 3:58 ` [PATCH v3 04/13] ARM: dts: ipq4019: Update ipq4019-dk01.1 board data Sricharan R
2018-03-20 7:33 ` Stephen Boyd
2018-03-20 11:45 ` sricharan at codeaurora.org
2018-03-20 14:31 ` Richard Cochran
2018-03-21 9:10 ` sricharan at codeaurora.org
2018-03-21 15:07 ` Richard Cochran
2018-03-22 13:05 ` sricharan at codeaurora.org
2018-03-22 21:32 ` Richard Cochran
2018-03-23 10:25 ` sricharan at codeaurora.org
2018-03-29 14:37 ` Andy Gross
2018-03-29 16:32 ` Richard Cochran
2018-03-29 16:37 ` Richard Cochran
2018-04-02 9:58 ` sricharan at codeaurora.org
2018-04-06 4:55 ` Richard Cochran
2018-04-06 13:05 ` sricharan at codeaurora.org
2018-04-06 15:13 ` Richard Cochran
2018-04-06 16:08 ` sricharan at codeaurora.org
2018-03-20 3:58 ` [PATCH v3 05/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi Sricharan R
2018-03-20 14:32 ` Richard Cochran
2018-03-20 3:58 ` [PATCH v3 06/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file Sricharan R
2018-03-20 7:34 ` Stephen Boyd
2018-03-20 12:10 ` sricharan at codeaurora.org
2018-03-20 3:58 ` [PATCH v3 07/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 " Sricharan R
2018-03-20 3:58 ` Sricharan R [this message]
2018-03-20 3:58 ` [PATCH v3 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 " Sricharan R
2018-03-20 3:58 ` [PATCH v3 10/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 " Sricharan R
2018-03-20 3:58 ` [PATCH v3 11/13] ARM: dts: ipq8074: Add peripheral nodes Sricharan R
2018-03-20 3:58 ` [PATCH v3 12/13] ARM: dts: ipq8074: Add pcie nodes Sricharan R
2018-03-20 3:58 ` [PATCH v3 13/13] ARM: dts: ipq8074: Enable few peripherals for hk01 board Sricharan R
2018-03-20 7:35 ` Stephen Boyd
2018-03-20 12:10 ` sricharan at codeaurora.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521518336-5467-9-git-send-email-sricharan@codeaurora.org \
--to=sricharan@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).