From: abel.vesa@nxp.com (Abel Vesa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] arm: imx: Update clk driver API
Date: Thu, 22 Mar 2018 11:55:26 +0200 [thread overview]
Message-ID: <1521712529-632-2-git-send-email-abel.vesa@nxp.com> (raw)
In-Reply-To: <1521712529-632-1-git-send-email-abel.vesa@nxp.com>
This adds the following new wrappers:
- imx_clk_gate2_flag
- imx_clk_set_parent
It also updates the flags for the old wrappers.
Signed-off-by: Anson Huang <anson.huang@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
---
drivers/clk/imx/clk.h | 42 +++++++++++++++++++++++++++++++-----------
1 file changed, 31 insertions(+), 11 deletions(-)
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index d69c4bb..466c37f3 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -4,6 +4,7 @@
#include <linux/spinlock.h>
#include <linux/clk-provider.h>
+#include <linux/clk.h>
extern spinlock_t imx_ccm_lock;
@@ -54,6 +55,15 @@ struct clk * imx_obtain_fixed_clock(
struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
void __iomem *reg, u8 shift, u32 exclusive_mask);
+static inline void imx_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = clk_set_parent(clk, parent);
+
+ if (ret)
+ pr_err("failed to set parent of clk %s to %s: %d\n",
+ __clk_get_name(clk), __clk_get_name(parent), ret);
+}
+
struct clk *imx_clk_pfd(const char *name, const char *parent_name,
void __iomem *reg, u8 idx);
@@ -96,7 +106,8 @@ static inline struct clk *imx_clk_fixed_factor(const char *name,
static inline struct clk *imx_clk_divider(const char *name, const char *parent,
void __iomem *reg, u8 shift, u8 width)
{
- return clk_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT,
+ return clk_register_divider(NULL, name, parent,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
reg, shift, width, 0, &imx_ccm_lock);
}
@@ -112,7 +123,7 @@ static inline struct clk *imx_clk_divider2(const char *name, const char *parent,
void __iomem *reg, u8 shift, u8 width)
{
return clk_register_divider(NULL, name, parent,
- CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE | CLK_OPS_PARENT_ENABLE,
reg, shift, width, 0, &imx_ccm_lock);
}
@@ -133,7 +144,15 @@ static inline struct clk *imx_clk_gate_dis(const char *name, const char *parent,
static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
void __iomem *reg, u8 shift)
{
- return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ return clk_register_gate2(NULL, name, parent,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, reg,
+ shift, 0x3, 0, &imx_ccm_lock, NULL);
+}
+
+static inline struct clk *imx_clk_gate2_flags(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, unsigned long flags)
+{
+ return clk_register_gate2(NULL, name, parent, flags, reg,
shift, 0x3, 0, &imx_ccm_lock, NULL);
}
@@ -141,7 +160,8 @@ static inline struct clk *imx_clk_gate2_shared(const char *name,
const char *parent, void __iomem *reg, u8 shift,
unsigned int *share_count)
{
- return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ return clk_register_gate2(NULL, name, parent,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, reg,
shift, 0x3, 0, &imx_ccm_lock, share_count);
}
@@ -150,8 +170,8 @@ static inline struct clk *imx_clk_gate2_shared2(const char *name,
unsigned int *share_count)
{
return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT |
- CLK_OPS_PARENT_ENABLE, reg, shift, 0x3, 0,
- &imx_ccm_lock, share_count);
+ CLK_SET_RATE_GATE | CLK_OPS_PARENT_ENABLE,
+ reg, shift, 0x3, 0, &imx_ccm_lock, share_count);
}
static inline struct clk *imx_clk_gate2_cgr(const char *name,
@@ -173,7 +193,7 @@ static inline struct clk *imx_clk_gate4(const char *name, const char *parent,
void __iomem *reg, u8 shift)
{
return clk_register_gate2(NULL, name, parent,
- CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE | CLK_OPS_PARENT_ENABLE,
reg, shift, 0x3, 0, &imx_ccm_lock, NULL);
}
@@ -181,8 +201,8 @@ static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
u8 shift, u8 width, const char **parents, int num_parents)
{
return clk_register_mux(NULL, name, parents, num_parents,
- CLK_SET_RATE_NO_REPARENT, reg, shift,
- width, 0, &imx_ccm_lock);
+ CLK_SET_RATE_NO_REPARENT | CLK_SET_PARENT_GATE,
+ reg, shift, width, 0, &imx_ccm_lock);
}
static inline struct clk *imx_clk_mux2(const char *name, void __iomem *reg,
@@ -198,8 +218,8 @@ static inline struct clk *imx_clk_mux_flags(const char *name,
int num_parents, unsigned long flags)
{
return clk_register_mux(NULL, name, parents, num_parents,
- flags | CLK_SET_RATE_NO_REPARENT, reg, shift, width, 0,
- &imx_ccm_lock);
+ flags | CLK_SET_RATE_NO_REPARENT | CLK_SET_PARENT_GATE,
+ reg, shift, width, 0, &imx_ccm_lock);
}
struct clk *imx_clk_cpu(const char *name, const char *parent_name,
--
2.7.4
next prev parent reply other threads:[~2018-03-22 9:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-22 9:55 [PATCH 0/4] arm: imx: Clock related updates Abel Vesa
2018-03-22 9:55 ` Abel Vesa [this message]
2018-03-22 14:14 ` [PATCH 1/4] arm: imx: Update clk driver API Fabio Estevam
2018-03-22 14:20 ` Fabio Estevam
2018-03-22 9:55 ` [PATCH 2/4] arm: imx: Correct dram pll type Abel Vesa
2018-03-22 12:31 ` Fabio Estevam
2018-03-22 13:29 ` Abel Vesa
2018-03-22 14:04 ` Fabio Estevam
2018-03-22 9:55 ` [PATCH 3/4] arm: imx: Correct ahb clk parent select Abel Vesa
2018-03-22 9:55 ` [PATCH 4/4] arm: imx: Update clk driver for imx7d Abel Vesa
2018-03-22 14:25 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521712529-632-2-git-send-email-abel.vesa@nxp.com \
--to=abel.vesa@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).