* [PATCH] reset: uniphier: add ethernet reset control support for PXs3
@ 2018-03-23 5:12 Kunihiko Hayashi
2018-03-23 10:16 ` Masahiro Yamada
0 siblings, 1 reply; 3+ messages in thread
From: Kunihiko Hayashi @ 2018-03-23 5:12 UTC (permalink / raw)
To: linux-arm-kernel
Add reset lines for ethernet controller on PXs3 SoC.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
drivers/reset/reset-uniphier.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index e8bb023..fd3afbd 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -121,6 +121,8 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = {
UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
+ UNIPHIER_RESETX(6, 0x200c, 9), /* Ether0 */
+ UNIPHIER_RESETX(7, 0x200c, 10), /* Ether1 */
UNIPHIER_RESETX(8, 0x200c, 12), /* STDMAC */
UNIPHIER_RESETX(12, 0x200c, 4), /* USB30 link (GIO0) */
UNIPHIER_RESETX(13, 0x200c, 5), /* USB31 link (GIO1) */
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH] reset: uniphier: add ethernet reset control support for PXs3
2018-03-23 5:12 [PATCH] reset: uniphier: add ethernet reset control support for PXs3 Kunihiko Hayashi
@ 2018-03-23 10:16 ` Masahiro Yamada
2018-03-23 10:26 ` Philipp Zabel
0 siblings, 1 reply; 3+ messages in thread
From: Masahiro Yamada @ 2018-03-23 10:16 UTC (permalink / raw)
To: linux-arm-kernel
2018-03-23 14:12 GMT+09:00 Kunihiko Hayashi <hayashi.kunihiko@socionext.com>:
> Add reset lines for ethernet controller on PXs3 SoC.
>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
> drivers/reset/reset-uniphier.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
> index e8bb023..fd3afbd 100644
> --- a/drivers/reset/reset-uniphier.c
> +++ b/drivers/reset/reset-uniphier.c
> @@ -121,6 +121,8 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
> static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = {
> UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
> UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
> + UNIPHIER_RESETX(6, 0x200c, 9), /* Ether0 */
> + UNIPHIER_RESETX(7, 0x200c, 10), /* Ether1 */
> UNIPHIER_RESETX(8, 0x200c, 12), /* STDMAC */
> UNIPHIER_RESETX(12, 0x200c, 4), /* USB30 link (GIO0) */
> UNIPHIER_RESETX(13, 0x200c, 5), /* USB31 link (GIO1) */
> --
> 2.7.4
>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH] reset: uniphier: add ethernet reset control support for PXs3
2018-03-23 10:16 ` Masahiro Yamada
@ 2018-03-23 10:26 ` Philipp Zabel
0 siblings, 0 replies; 3+ messages in thread
From: Philipp Zabel @ 2018-03-23 10:26 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 2018-03-23 at 19:16 +0900, Masahiro Yamada wrote:
> 2018-03-23 14:12 GMT+09:00 Kunihiko Hayashi <hayashi.kunihiko@socionext.com>:
> > Add reset lines for ethernet controller on PXs3 SoC.
> >
> > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> > ---
> > drivers/reset/reset-uniphier.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
> > index e8bb023..fd3afbd 100644
> > --- a/drivers/reset/reset-uniphier.c
> > +++ b/drivers/reset/reset-uniphier.c
> > @@ -121,6 +121,8 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
> > static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = {
> > UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
> > UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
> > + UNIPHIER_RESETX(6, 0x200c, 9), /* Ether0 */
> > + UNIPHIER_RESETX(7, 0x200c, 10), /* Ether1 */
> > UNIPHIER_RESETX(8, 0x200c, 12), /* STDMAC */
> > UNIPHIER_RESETX(12, 0x200c, 4), /* USB30 link (GIO0) */
> > UNIPHIER_RESETX(13, 0x200c, 5), /* USB31 link (GIO1) */
> > --
> > 2.7.4
> >
>
> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Thank you, applied to reset/next.
regards
Philipp
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-03-23 10:26 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-03-23 5:12 [PATCH] reset: uniphier: add ethernet reset control support for PXs3 Kunihiko Hayashi
2018-03-23 10:16 ` Masahiro Yamada
2018-03-23 10:26 ` Philipp Zabel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).