[PATCH v2 10/10] ARM: dts: at91: sama5d2: Add resistive touch device

[eugen.hristev@microchip.com (Eugen Hristev)]

Add generic resistive touch device which is connected to ADC block
inside the SAMA5D2 SoC

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Changes in v2:
 - now added a generic resistive touchscreen node instead of architecture
specific

 arch/arm/boot/dts/sama5d2.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index f06ba99..0d87dc0 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1442,6 +1442,16 @@
 				status = "disabled";
 			};
 
+			resistive_touch: resistive-touch {
+				compatible = "generic-resistive-adc-touch";
+				io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+					      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+					      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+				io-channel-names = "x", "y", "pressure";
+				generic-resistive-adc-touch,pressure-threshold = <10000>;
+				status = "disabled";
+			};
+
 			pioA: pinctrl at fc038000 {
 				compatible = "atmel,sama5d2-pinctrl";
 				reg = <0xfc038000 0x600>;
-- 
2.7.4