From: ulf.hansson@linaro.org (Ulf Hansson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 04/26] PM / Domains: Add support for CPU devices to genpd
Date: Thu, 12 Apr 2018 13:14:09 +0200 [thread overview]
Message-ID: <1523531671-27491-5-git-send-email-ulf.hansson@linaro.org> (raw)
In-Reply-To: <1523531671-27491-1-git-send-email-ulf.hansson@linaro.org>
To enable a device belonging to a CPU to be attached to a PM domain managed
by genpd, let's do a few changes to genpd as to make it convenient to
manage the specifics around CPUs.
First, as to be able to quickly find out what CPUs that are attached to a
genpd, which typically becomes useful from a genpd governor as following
changes is about to show, let's add a cpumask 'cpus' to the struct
generic_pm_domain.
At the point when a device that belongs to a CPU, is attached/detached to
its corresponding PM domain via genpd_add_device(), let's update the
cpumask in genpd->cpus. Moreover, propagate the update of the cpumask to
the master domains, which makes the genpd->cpus to contain a cpumask that
hierarchically reflect all CPUs for a genpd, including CPUs attached to
subdomains.
Second, to unconditionally manage CPUs and the cpumask in genpd->cpus, is
unnecessary for cases when only non-CPU devices are parts of a genpd.
Let's avoid this by adding a new configuration bit, GENPD_FLAG_CPU_DOMAIN.
Clients must set the bit before they call pm_genpd_init(), as to instruct
genpd that it shall deal with CPUs and thus manage the cpumask in
genpd->cpus.
Cc: Lina Iyer <ilina@codeaurora.org>
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/base/power/domain.c | 69 ++++++++++++++++++++++++++++++++++++++++++++-
include/linux/pm_domain.h | 3 ++
2 files changed, 71 insertions(+), 1 deletion(-)
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 9aff79d..e178521 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -19,6 +19,7 @@
#include <linux/sched.h>
#include <linux/suspend.h>
#include <linux/export.h>
+#include <linux/cpu.h>
#include "power.h"
@@ -125,6 +126,7 @@ static const struct genpd_lock_ops genpd_spin_ops = {
#define genpd_is_irq_safe(genpd) (genpd->flags & GENPD_FLAG_IRQ_SAFE)
#define genpd_is_always_on(genpd) (genpd->flags & GENPD_FLAG_ALWAYS_ON)
#define genpd_is_active_wakeup(genpd) (genpd->flags & GENPD_FLAG_ACTIVE_WAKEUP)
+#define genpd_is_cpu_domain(genpd) (genpd->flags & GENPD_FLAG_CPU_DOMAIN)
static inline bool irq_safe_dev_in_no_sleep_domain(struct device *dev,
const struct generic_pm_domain *genpd)
@@ -1377,6 +1379,62 @@ static void genpd_free_dev_data(struct device *dev,
dev_pm_put_subsys_data(dev);
}
+static void __genpd_update_cpumask(struct generic_pm_domain *genpd,
+ int cpu, bool set, unsigned int depth)
+{
+ struct gpd_link *link;
+
+ if (!genpd_is_cpu_domain(genpd))
+ return;
+
+ list_for_each_entry(link, &genpd->slave_links, slave_node) {
+ struct generic_pm_domain *master = link->master;
+
+ genpd_lock_nested(master, depth + 1);
+ __genpd_update_cpumask(master, cpu, set, depth + 1);
+ genpd_unlock(master);
+ }
+
+ if (set)
+ cpumask_set_cpu(cpu, genpd->cpus);
+ else
+ cpumask_clear_cpu(cpu, genpd->cpus);
+}
+
+static void genpd_update_cpumask(struct generic_pm_domain *genpd,
+ struct device *dev, bool set)
+{
+ bool is_cpu = false;
+ int cpu;
+
+ if (!genpd_is_cpu_domain(genpd))
+ return;
+
+ for_each_possible_cpu(cpu) {
+ if (get_cpu_device(cpu) == dev) {
+ is_cpu = true;
+ break;
+ }
+ }
+
+ if (!is_cpu)
+ return;
+
+ __genpd_update_cpumask(genpd, cpu, set, 0);
+}
+
+static void genpd_set_cpumask(struct generic_pm_domain *genpd,
+ struct device *dev)
+{
+ genpd_update_cpumask(genpd, dev, true);
+}
+
+static void genpd_clear_cpumask(struct generic_pm_domain *genpd,
+ struct device *dev)
+{
+ genpd_update_cpumask(genpd, dev, false);
+}
+
static int genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
struct gpd_timing_data *td)
{
@@ -1403,6 +1461,8 @@ static int genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
if (ret)
goto out;
+ genpd_set_cpumask(genpd, dev);
+
dev_pm_domain_set(dev, &genpd->domain);
genpd->device_count++;
@@ -1466,6 +1526,7 @@ static int genpd_remove_device(struct generic_pm_domain *genpd,
if (genpd->detach_dev)
genpd->detach_dev(genpd, dev);
+ genpd_clear_cpumask(genpd, dev);
dev_pm_domain_set(dev, NULL);
list_del_init(&pdd->list_node);
@@ -1693,11 +1754,16 @@ int pm_genpd_init(struct generic_pm_domain *genpd,
if (genpd_is_always_on(genpd) && !genpd_status_on(genpd))
return -EINVAL;
+ if (!zalloc_cpumask_var(&genpd->cpus, GFP_KERNEL))
+ return -ENOMEM;
+
/* Use only one "off" state if there were no states declared */
if (genpd->state_count == 0) {
ret = genpd_set_default_power_state(genpd);
- if (ret)
+ if (ret) {
+ free_cpumask_var(genpd->cpus);
return ret;
+ }
} else if (!gov) {
pr_warn("%s : no governor for states\n", genpd->name);
}
@@ -1740,6 +1806,7 @@ static int genpd_remove(struct generic_pm_domain *genpd)
list_del(&genpd->gpd_list_node);
genpd_unlock(genpd);
cancel_work_sync(&genpd->power_off_work);
+ free_cpumask_var(genpd->cpus);
kfree(genpd->free);
pr_debug("%s: removed %s\n", __func__, genpd->name);
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 55ad34d..29ab00c 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -16,12 +16,14 @@
#include <linux/of.h>
#include <linux/notifier.h>
#include <linux/spinlock.h>
+#include <linux/cpumask.h>
/* Defines used for the flags field in the struct generic_pm_domain */
#define GENPD_FLAG_PM_CLK (1U << 0) /* PM domain uses PM clk */
#define GENPD_FLAG_IRQ_SAFE (1U << 1) /* PM domain operates in atomic */
#define GENPD_FLAG_ALWAYS_ON (1U << 2) /* PM domain is always powered on */
#define GENPD_FLAG_ACTIVE_WAKEUP (1U << 3) /* Keep devices active if wakeup */
+#define GENPD_FLAG_CPU_DOMAIN (1U << 4) /* PM domain manages CPUs */
enum gpd_status {
GPD_STATE_ACTIVE = 0, /* PM domain is active */
@@ -66,6 +68,7 @@ struct generic_pm_domain {
unsigned int suspended_count; /* System suspend device counter */
unsigned int prepared_count; /* Suspend counter of prepared devices */
unsigned int performance_state; /* Aggregated max performance state */
+ cpumask_var_t cpus; /* A cpumask of the attached CPUs */
int (*power_off)(struct generic_pm_domain *domain);
int (*power_on)(struct generic_pm_domain *domain);
int (*set_performance_state)(struct generic_pm_domain *genpd,
--
2.7.4
next prev parent reply other threads:[~2018-04-12 11:14 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-12 11:14 [PATCH v7 00/26] PM / Domains: Support hierarchical CPU arrangement (PSCI/ARM) Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 01/26] PM / Domains: Don't treat zero found compatible idle states as an error Ulf Hansson
2018-04-16 17:33 ` Lina Iyer
2018-04-12 11:14 ` [PATCH v7 02/26] PM / Domains: Deal with multiple states but no governor in genpd Ulf Hansson
2018-04-16 17:34 ` Lina Iyer
2018-04-12 11:14 ` [PATCH v7 03/26] PM / Domains: Add generic data pointer to genpd_power_state struct Ulf Hansson
2018-04-12 11:14 ` Ulf Hansson [this message]
2018-04-12 11:14 ` [PATCH v7 05/26] PM / Domains: Add helper functions to attach/detach CPUs to/from genpd Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 06/26] timer: Export next wakeup time of a CPU Ulf Hansson
2018-04-13 8:47 ` Rafael J. Wysocki
2018-04-15 12:02 ` Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 07/26] PM / Domains: Add genpd governor for CPUs Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 08/26] PM / Domains: Extend genpd CPU governor to cope with QoS constraints Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 09/26] kernel/cpu_pm: Manage runtime PM in the idle path for CPUs Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 10/26] dt: psci: Update DT bindings to support hierarchical PSCI states Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 11/26] of: base: Add of_get_cpu_state_node() to get idle states for a CPU node Ulf Hansson
2018-04-13 15:05 ` Rob Herring
2018-04-15 11:59 ` Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 12/26] cpuidle: dt: Support hierarchical CPU idle states Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 13/26] drivers: firmware: psci: Move psci to separate directory Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 14/26] MAINTAINERS: Update files for PSCI Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 15/26] drivers: firmware: psci: Split psci_dt_cpu_init_idle() Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 16/26] drivers: firmware: psci: Support hierarchical CPU idle states Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 17/26] drivers: firmware: psci: Simplify error path of psci_dt_init() Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 18/26] drivers: firmware: psci: Announce support for OS initiated suspend mode Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 19/26] drivers: firmware: psci: Prepare to use " Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 20/26] drivers: firmware: psci: Share a few internal PSCI functions Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 21/26] drivers: firmware: psci: Add support for PM domains using genpd Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 22/26] drivers: firmware: psci: Introduce psci_dt_topology_init() Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 23/26] drivers: firmware: psci: Try to attach CPU devices to their PM domains Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 24/26] drivers: firmware: psci: Deal with CPU hotplug when using OSI mode Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 25/26] arm64: kernel: Respect the hierarchical CPU topology in DT for PSCI Ulf Hansson
2018-04-12 11:14 ` [PATCH v7 26/26] arm64: dts: Convert to the hierarchical CPU topology layout for MSM8916 Ulf Hansson
2018-05-24 9:16 ` [PATCH v7 00/26] PM / Domains: Support hierarchical CPU arrangement (PSCI/ARM) Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1523531671-27491-5-git-send-email-ulf.hansson@linaro.org \
--to=ulf.hansson@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).