From: jbrunet@baylibre.com (Jerome Brunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
Date: Mon, 16 Apr 2018 11:59:12 +0200 [thread overview]
Message-ID: <1523872752.2601.26.camel@baylibre.com> (raw)
In-Reply-To: <20180409143749.71197-5-yixun.lan@amlogic.com>
On Mon, 2018-04-09 at 22:37 +0800, Yixun Lan wrote:
> Add dt-bindings headers for the Meson-AXG's AO clock and
> reset controller.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> include/dt-bindings/clock/axg-aoclkc.h | 26 ++++++++++++++++++++++++++
> include/dt-bindings/reset/axg-aoclkc.h | 20 ++++++++++++++++++++
> 2 files changed, 46 insertions(+)
> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
Hi Philipp,
Is OK if we take this through clock tree ?
The related reset controller is actually part of a clock controller driver.
Best Regards
Jerome
>
> diff --git a/include/dt-bindings/clock/axg-aoclkc.h b/include/dt-bindings/clock/axg-aoclkc.h
> new file mode 100644
> index 000000000000..61955016a55b
> --- /dev/null
> +++ b/include/dt-bindings/clock/axg-aoclkc.h
> @@ -0,0 +1,26 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
> +/*
> + * Copyright (c) 2016 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + *
> + * Copyright (c) 2018 Amlogic, inc.
> + * Author: Qiufang Dai <qiufang.dai@amlogic.com>
> + */
> +
> +#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_AXG_AOCLK
> +#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_AXG_AOCLK
> +
> +#define CLKID_AO_REMOTE 0
> +#define CLKID_AO_I2C_MASTER 1
> +#define CLKID_AO_I2C_SLAVE 2
> +#define CLKID_AO_UART1 3
> +#define CLKID_AO_UART2 4
> +#define CLKID_AO_IR_BLASTER 5
> +#define CLKID_AO_SAR_ADC 6
> +#define CLKID_AO_CLK81 7
> +#define CLKID_AO_SAR_ADC_SEL 8
> +#define CLKID_AO_SAR_ADC_DIV 9
> +#define CLKID_AO_SAR_ADC_CLK 10
> +#define CLKID_AO_ALT_XTAL 11
> +
> +#endif
> diff --git a/include/dt-bindings/reset/axg-aoclkc.h b/include/dt-bindings/reset/axg-aoclkc.h
> new file mode 100644
> index 000000000000..d342c0b6b2a7
> --- /dev/null
> +++ b/include/dt-bindings/reset/axg-aoclkc.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
> +/*
> + * Copyright (c) 2016 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + *
> + * Copyright (c) 2018 Amlogic, inc.
> + * Author: Qiufang Dai <qiufang.dai@amlogic.com>
> + */
> +
> +#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_AXG_AOCLK
> +#define DT_BINDINGS_RESET_AMLOGIC_MESON_AXG_AOCLK
> +
> +#define RESET_AO_REMOTE 0
> +#define RESET_AO_I2C_MASTER 1
> +#define RESET_AO_I2C_SLAVE 2
> +#define RESET_AO_UART1 3
> +#define RESET_AO_UART2 4
> +#define RESET_AO_IR_BLASTER 5
> +
> +#endif
next prev parent reply other threads:[~2018-04-16 9:59 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-09 14:37 [PATCH v5 0/7] clk: meson-axg: Add AO Cloclk and Reset driver Yixun Lan
2018-04-09 14:37 ` [PATCH v5 1/7] clk: meson: migrate to devm_of_clk_add_hw_provider API Yixun Lan
2018-04-09 14:37 ` [PATCH v5 2/7] clk: meson: aoclk: refactor common code into dedicated file Yixun Lan
2018-04-16 10:38 ` Jerome Brunet
2018-04-17 8:16 ` Yixun Lan
2018-04-17 14:15 ` Jerome Brunet
2018-04-16 11:34 ` Jerome Brunet
2018-04-17 8:17 ` Yixun Lan
2018-04-09 14:37 ` [PATCH v5 3/7] dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC Yixun Lan
2018-04-09 14:37 ` [PATCH v5 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings Yixun Lan
2018-04-16 9:59 ` Jerome Brunet [this message]
2018-04-16 10:09 ` Philipp Zabel
2018-04-09 14:37 ` [PATCH v5 5/7] clk: meson-axg: Add AO Clock and Reset controller driver Yixun Lan
2018-04-16 11:45 ` Jerome Brunet
2018-04-17 8:18 ` Yixun Lan
2018-04-09 14:37 ` [PATCH v5 6/7] clk: meson: drop CLK_SET_RATE_PARENT flag Yixun Lan
2018-04-09 14:37 ` [PATCH v5 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1523872752.2601.26.camel@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).