[PATCH v5 5/7] clk: meson-axg: Add AO Clock and Reset controller driver

[jbrunet@baylibre.com (Jerome Brunet)]

On Mon, 2018-04-09 at 22:37 +0800, Yixun Lan wrote:
> From: Qiufang Dai <qiufang.dai@amlogic.com>
> 
> Adds a Clock and Reset controller driver for the Always-On part
> of the Amlogic Meson-AXG SoC.
> 
> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
>  drivers/clk/meson/Kconfig     |   1 +
>  drivers/clk/meson/Makefile    |   2 +-
>  drivers/clk/meson/axg-aoclk.c | 164 ++++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/meson/axg-aoclk.h |  31 ++++++++
>  4 files changed, 197 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/clk/meson/axg-aoclk.c
>  create mode 100644 drivers/clk/meson/axg-aoclk.h
> 
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index fddc7ec7b820..815659eebea3 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -38,6 +38,7 @@ config COMMON_CLK_AXG
>  	bool
>  	depends on COMMON_CLK_AMLOGIC
>  	select RESET_CONTROLLER
> +	select COMMON_CLK_MESON_AO
>  	select COMMON_CLK_REGMAP_MESON
>  	select MFD_SYSCON
>  	help
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 0a8df284f4e7..d0d13aeb369a 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -6,5 +6,5 @@ obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
>  obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
>  obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
>  obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
> -obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o
> +obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o axg-aoclk.o
>  obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)	+= clk-regmap.o
> diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c
> new file mode 100644
> index 000000000000..cb56d809d3df
> --- /dev/null
> +++ b/drivers/clk/meson/axg-aoclk.c
> @@ -0,0 +1,164 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Amlogic Meson-AXG Clock Controller Driver
> + *
> + * Copyright (c) 2016 Baylibre SAS.
> + * Author: Michael Turquette <mturquette@baylibre.com>
> + *
> + * Copyright (c) 2018 Amlogic, inc.
> + * Author: Qiufang Dai <qiufang.dai@amlogic.com>
> + */
> +#include <linux/clk-provider.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/init.h>
Not required 

> +#include "clkc.h"
Why do you need this? looks like clk-regmap.h would be enough here ?

> +#include "axg-aoclk.h"
> +
> +#define AXG_AO_GATE(_name, _bit)					\
> +static struct clk_regmap _name##_ao = {					\
> +	.data = &(struct clk_regmap_gate_data) {			\
> +		.offset = (AO_RTI_GEN_CNTL_REG0),			\
> +		.bit_idx = (_bit),					\
> +	},								\
> +	.hw.init = &(struct clk_init_data) {				\
> +		.name = #_name "_ao",					\
> +		.ops = &clk_regmap_gate_ops,				\
> +		.parent_names = (const char *[]){ "clk81" },		\
> +		.num_parents = 1,					\
> +		.flags = CLK_IGNORE_UNUSED,				\
> +	},								\
> +}
> +
> +AXG_AO_GATE(remote, 0);
> +AXG_AO_GATE(i2c_master, 1);
> +AXG_AO_GATE(i2c_slave, 2);
> +AXG_AO_GATE(uart1, 3);
> +AXG_AO_GATE(uart2, 5);
> +AXG_AO_GATE(ir_blaster, 6);
> +AXG_AO_GATE(saradc, 7);
> +
> +static struct clk_regmap ao_clk81 = {
> +	.data = &(struct clk_regmap_mux_data) {
> +		.offset = AO_RTI_PWR_CNTL_REG0,
> +		.mask = 0x1,
> +		.shift = 8,
> +	},
> +	.hw.init = &(struct clk_init_data){
> +		.name = "ao_clk81",
> +		.ops = &clk_regmap_mux_ro_ops,
> +		.parent_names = (const char *[]){ "clk81", "ao_alt_xtal"},
> +		.num_parents = 2,
> +	},
> +};
> +
> +static struct clk_regmap axg_saradc_mux = {
> +	.data = &(struct clk_regmap_mux_data) {
> +		.offset = AO_SAR_CLK,
> +		.mask = 0x3,
> +		.shift = 9,
> +	},
> +	.hw.init = &(struct clk_init_data){
> +		.name = "axg_saradc_mux",
> +		.ops = &clk_regmap_mux_ops,
> +		.parent_names = (const char *[]){ "xtal", "ao_clk81" },
> +		.num_parents = 2,
> +	},
> +};
> +
> +static struct clk_regmap axg_saradc_div = {
> +	.data = &(struct clk_regmap_div_data) {
> +		.offset = AO_SAR_CLK,
> +		.shift = 0,
> +		.width = 8,
> +	},
> +	.hw.init = &(struct clk_init_data){
> +		.name = "axg_saradc_div",
> +		.ops = &clk_regmap_divider_ops,
> +		.parent_names = (const char *[]){ "axg_saradc_mux" },
> +		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
> +	},
> +};
> +
> +static struct clk_regmap axg_saradc_gate = {
> +	.data = &(struct clk_regmap_gate_data) {
> +		.offset = AO_SAR_CLK,
> +		.bit_idx = 8,
> +	},
> +	.hw.init = &(struct clk_init_data){
> +		.name = "axg_saradc_gate",
> +		.ops = &clk_regmap_gate_ops,
> +		.parent_names = (const char *[]){ "axg_saradc_div" },
> +		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
> +	},
> +};
> +
> +static const unsigned int axg_aoclk_reset[] = {
> +	[RESET_AO_REMOTE] = 16,
> +	[RESET_AO_I2C_MASTER] = 18,
> +	[RESET_AO_I2C_SLAVE] = 19,
> +	[RESET_AO_UART1] = 17,
> +	[RESET_AO_UART2] = 22,
> +	[RESET_AO_IR_BLASTER] = 23,
> +};
> +
> +static struct clk_regmap *axg_aoclk_regmap[] = {
> +	[CLKID_AO_REMOTE]	= &remote_ao,
> +	[CLKID_AO_I2C_MASTER]	= &i2c_master_ao,
> +	[CLKID_AO_I2C_SLAVE]	= &i2c_slave_ao,
> +	[CLKID_AO_UART1]	= &uart1_ao,
> +	[CLKID_AO_UART2]	= &uart2_ao,
> +	[CLKID_AO_IR_BLASTER]	= &ir_blaster_ao,
> +	[CLKID_AO_SAR_ADC]	= &saradc_ao,
> +	[CLKID_AO_CLK81]	= &ao_clk81,
> +	[CLKID_AO_SAR_ADC_SEL]	= &axg_saradc_mux,
> +	[CLKID_AO_SAR_ADC_DIV]	= &axg_saradc_div,
> +	[CLKID_AO_SAR_ADC_CLK]	= &axg_saradc_gate,

Naming is not very consistent here, sometimes ao at beginning, sometimes the
end, with or w/o axg.

I would prefer if you prefix everything with axg_ao[clk] 
ex: axg_aoclk_remote, axg_aoclk_saradc_mux, etc ...

> +};
> +
> +static const struct clk_hw_onecell_data axg_aoclk_onecell_data = {
> +	.hws = {
> +		[CLKID_AO_REMOTE]	= &remote_ao.hw,
> +		[CLKID_AO_I2C_MASTER]	= &i2c_master_ao.hw,
> +		[CLKID_AO_I2C_SLAVE]	= &i2c_slave_ao.hw,
> +		[CLKID_AO_UART1]	= &uart1_ao.hw,
> +		[CLKID_AO_UART2]	= &uart2_ao.hw,
> +		[CLKID_AO_IR_BLASTER]	= &ir_blaster_ao.hw,
> +		[CLKID_AO_SAR_ADC]	= &saradc_ao.hw,
> +		[CLKID_AO_CLK81]	= &ao_clk81.hw,
> +		[CLKID_AO_SAR_ADC_SEL]	= &axg_saradc_mux.hw,
> +		[CLKID_AO_SAR_ADC_DIV]	= &axg_saradc_div.hw,
> +		[CLKID_AO_SAR_ADC_CLK]	= &axg_saradc_gate.hw,
> +	},
> +	.num = NR_CLKS,
> +};
> +
> +static const struct meson_aoclk_data axg_aoclkc_data = {
> +	.reset_reg	= AO_RTI_GEN_CNTL_REG0,
> +	.num_reset	= ARRAY_SIZE(axg_aoclk_reset),
> +	.reset		= axg_aoclk_reset,
> +	.num_clks	= ARRAY_SIZE(axg_aoclk_regmap),
> +	.clks		= axg_aoclk_regmap,
> +	.hw_data	= &axg_aoclk_onecell_data,
> +};
> +
> +static const struct of_device_id axg_aoclkc_match_table[] = {
> +	{
> +		.compatible	= "amlogic,meson-axg-aoclkc",
> +		.data		= &axg_aoclkc_data,
> +	},
> +	{ }
> +};
> +
> +static struct platform_driver axg_aoclkc_driver = {
> +	.probe		= meson_aoclkc_probe,
> +	.driver		= {
> +		.name	= "axg-aoclkc",
> +		.of_match_table = axg_aoclkc_match_table,
> +	},
> +};
> +
> +builtin_platform_driver(axg_aoclkc_driver);
> diff --git a/drivers/clk/meson/axg-aoclk.h b/drivers/clk/meson/axg-aoclk.h
> new file mode 100644
> index 000000000000..396cd3023064
> --- /dev/null
> +++ b/drivers/clk/meson/axg-aoclk.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Copyright (c) 2017 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + *
> + * Copyright (c) 2018 Amlogic, inc.
> + * Author: Qiufang Dai <qiufang.dai@amlogic.com>
> + */
> +
> +#ifndef __AXG_AOCLKC_H
> +#define __AXG_AOCLKC_H
> +
> +#include "meson-aoclk.h"
> +
> +#define NR_CLKS	11
> +/* AO Configuration Clock registers offsets
> + * Register offsets from the data sheet must be multiplied by 4.
> + */
> +#define AO_RTI_PWR_CNTL_REG1	0x0C
> +#define AO_RTI_PWR_CNTL_REG0	0x10
> +#define AO_RTI_GEN_CNTL_REG0	0x40
> +#define AO_OSCIN_CNTL		0x58
> +#define AO_CRT_CLK_CNTL1	0x68
> +#define AO_SAR_CLK		0x90
> +#define AO_RTC_ALT_CLK_CNTL0	0x94
> +#define AO_RTC_ALT_CLK_CNTL1	0x98
> +
> +#include <dt-bindings/clock/axg-aoclkc.h>
> +#include <dt-bindings/reset/axg-aoclkc.h>
> +
> +#endif /* __AXG_AOCLKC_H */