* [PATCH 1/1] drm/mediatek: Add support for mediatek SOC MT2712 [not found] ` <20180514095910.22618-2-stu.hsieh@mediatek.com> @ 2018-05-15 2:30 ` CK Hu 2018-05-22 7:47 ` Stu Hsieh 0 siblings, 1 reply; 3+ messages in thread From: CK Hu @ 2018-05-15 2:30 UTC (permalink / raw) To: linux-arm-kernel Hi, Stu: I've some inline comments. On Mon, 2018-05-14 at 17:59 +0800, Stu Hsieh wrote: > This patch add support for the Mediatek MT2712 DISP subsystem. > There are two OVL engine and three disp output in MT2712. > > Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> > --- > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 77 ++++++++++++++++++++++++++--- > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 4 ++ > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 3 ++ > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 44 +++++++++++++++++ > drivers/gpu/drm/mediatek/mtk_drm_drv.h | 7 ++- > 5 files changed, 127 insertions(+), 8 deletions(-) > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > index 8130f3dab661..641f4361b006 100644 > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > @@ -29,6 +29,8 @@ > #define DISP_REG_CONFIG_DISP_COLOR0_SEL_IN 0x084 > #define DISP_REG_CONFIG_DISP_COLOR1_SEL_IN 0x088 > #define DISP_REG_CONFIG_DPI_SEL_IN 0x0ac > +#define DISP_REG_CONFIG_DISP_RDMA2_SOUT 0x0b8 > +#define DISP_REG_CONFIG_DISP_RDMA0_MOUT_EN 0x0c4 > #define DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN 0x0c8 > #define DISP_REG_CONFIG_MMSYS_CG_CON0 0x100 > > @@ -41,6 +43,7 @@ > #define DISP_REG_MUTEX_RST(n) (0x28 + 0x20 * (n)) > #define DISP_REG_MUTEX_MOD(n) (0x2c + 0x20 * (n)) > #define DISP_REG_MUTEX_SOF(n) (0x30 + 0x20 * (n)) > +#define DISP_REG_MUTEX_MOD2(n) (0x34 + 0x20 * (n)) > > #define INT_MUTEX BIT(1) > > @@ -60,6 +63,25 @@ > #define MT8173_MUTEX_MOD_DISP_PWM1 BIT(24) > #define MT8173_MUTEX_MOD_DISP_OD BIT(25) > > +#define MT2712_MUTEX_MOD_DISP_OVL0 BIT(11) > +#define MT2712_MUTEX_MOD_DISP_OVL1 BIT(12) > +#define MT2712_MUTEX_MOD_DISP_RDMA0 BIT(13) > +#define MT2712_MUTEX_MOD_DISP_RDMA1 BIT(14) > +#define MT2712_MUTEX_MOD_DISP_RDMA2 BIT(15) > +#define MT2712_MUTEX_MOD_DISP_WDMA0 BIT(16) > +#define MT2712_MUTEX_MOD_DISP_WDMA1 BIT(17) > +#define MT2712_MUTEX_MOD_DISP_COLOR0 BIT(18) > +#define MT2712_MUTEX_MOD_DISP_COLOR1 BIT(19) > +#define MT2712_MUTEX_MOD_DISP_AAL BIT(20) > +#define MT2712_MUTEX_MOD_DISP_UFOE BIT(22) > +#define MT2712_MUTEX_MOD_DISP_PWM0 BIT(23) > +#define MT2712_MUTEX_MOD_DISP_PWM1 BIT(24) > +#define MT2712_MUTEX_MOD_DISP_PWM2 BIT(10) > +#define MT2712_MUTEX_MOD_DISP_OD BIT(25) > +/* modules more than 32, add BIT(31) when using DISP_REG_MUTEX_MOD2 bit */ > +#define MT2712_MUTEX_MOD2_DISP_AAL1 (BIT(1) | BIT(31)) > +#define MT2712_MUTEX_MOD2_DISP_OD1 (BIT(2) | BIT(31)) > + It looks like that MUTEX_MOD definition varies for each SoC. I think such definition should be passed from dts to prevent modify driver for each SoC. For example, the clock definition varies for each SoC, and its definition is placed in [1]. The dts [2] include the header file and pass the clock definition to driver. [1] https://elixir.bootlin.com/linux/v4.17-rc5/source/include/dt-bindings/clock/mt2712-clk.h [2] https://elixir.bootlin.com/linux/v4.17-rc5/source/arch/arm64/boot/dts/mediatek/mt2712e.dtsi > #define MT2701_MUTEX_MOD_DISP_OVL BIT(3) > #define MT2701_MUTEX_MOD_DISP_WDMA BIT(6) > #define MT2701_MUTEX_MOD_DISP_COLOR BIT(7) > @@ -74,6 +96,7 @@ > > #define OVL0_MOUT_EN_COLOR0 0x1 > #define OD_MOUT_EN_RDMA0 0x1 > +#define OD1_MOUT_EN_RDMA1 BIT(16) > #define UFOE_MOUT_EN_DSI0 0x1 > #define COLOR0_SEL_IN_OVL0 0x1 > #define OVL1_MOUT_EN_COLOR1 0x1 > @@ -108,6 +131,26 @@ static const unsigned int mt2701_mutex_mod[DDP_COMPONENT_ID_MAX] = { > [DDP_COMPONENT_WDMA0] = MT2701_MUTEX_MOD_DISP_WDMA, > }; > > +static const unsigned int mt2712_mutex_mod[DDP_COMPONENT_ID_MAX] = { > + [DDP_COMPONENT_AAL] = MT2712_MUTEX_MOD_DISP_AAL, > + [DDP_COMPONENT_AAL1] = MT2712_MUTEX_MOD2_DISP_AAL1, > + [DDP_COMPONENT_COLOR0] = MT2712_MUTEX_MOD_DISP_COLOR0, > + [DDP_COMPONENT_COLOR1] = MT2712_MUTEX_MOD_DISP_COLOR1, > + [DDP_COMPONENT_OD] = MT2712_MUTEX_MOD_DISP_OD, > + [DDP_COMPONENT_OD1] = MT2712_MUTEX_MOD2_DISP_OD1, > + [DDP_COMPONENT_OVL0] = MT2712_MUTEX_MOD_DISP_OVL0, > + [DDP_COMPONENT_OVL1] = MT2712_MUTEX_MOD_DISP_OVL1, > + [DDP_COMPONENT_PWM0] = MT2712_MUTEX_MOD_DISP_PWM0, > + [DDP_COMPONENT_PWM1] = MT2712_MUTEX_MOD_DISP_PWM1, > + [DDP_COMPONENT_PWM2] = MT2712_MUTEX_MOD_DISP_PWM2, > + [DDP_COMPONENT_RDMA0] = MT2712_MUTEX_MOD_DISP_RDMA0, > + [DDP_COMPONENT_RDMA1] = MT2712_MUTEX_MOD_DISP_RDMA1, > + [DDP_COMPONENT_RDMA2] = MT2712_MUTEX_MOD_DISP_RDMA2, > + [DDP_COMPONENT_UFOE] = MT2712_MUTEX_MOD_DISP_UFOE, > + [DDP_COMPONENT_WDMA0] = MT2712_MUTEX_MOD_DISP_WDMA0, > + [DDP_COMPONENT_WDMA1] = MT2712_MUTEX_MOD_DISP_WDMA1, > +}; > + > static const unsigned int mt8173_mutex_mod[DDP_COMPONENT_ID_MAX] = { > [DDP_COMPONENT_AAL] = MT8173_MUTEX_MOD_DISP_AAL, > [DDP_COMPONENT_COLOR0] = MT8173_MUTEX_MOD_DISP_COLOR0, > @@ -150,6 +193,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur, > } else if (cur == DDP_COMPONENT_GAMMA && next == DDP_COMPONENT_RDMA1) { > *addr = DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN; > value = GAMMA_MOUT_EN_RDMA1; > + } else if (cur == DDP_COMPONENT_OD1 && next == DDP_COMPONENT_RDMA1) { > + *addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN; > + value = OD1_MOUT_EN_RDMA1; I think this should be moved to an independent patch and its title is 'add connection from OD1 to RDMA1'. > } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) { > *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN; > value = RDMA1_MOUT_DPI0; > @@ -278,6 +324,7 @@ void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex, > struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp, > mutex[mutex->id]); > unsigned int reg; > + unsigned int offset; > > WARN_ON(&ddp->mutex[mutex->id] != mutex); > > @@ -292,9 +339,17 @@ void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex, > reg = MUTEX_SOF_DPI0; > break; > default: > - reg = readl_relaxed(ddp->regs + DISP_REG_MUTEX_MOD(mutex->id)); > - reg |= ddp->mutex_mod[id]; > - writel_relaxed(reg, ddp->regs + DISP_REG_MUTEX_MOD(mutex->id)); > + if (ddp->mutex_mod[id] <= BIT(31)) { You could reduce one byte if you write as if (ddp->mutex_mod[id] < BIT(32)) > + offset = DISP_REG_MUTEX_MOD(mutex->id); > + reg = readl_relaxed(ddp->regs + offset); > + reg |= ddp->mutex_mod[id]; > + writel_relaxed(reg, ddp->regs + offset); > + } else { > + offset = DISP_REG_MUTEX_MOD2(mutex->id); > + reg = readl_relaxed(ddp->regs + offset); > + reg |= (ddp->mutex_mod[id] & ~BIT(31)); > + writel_relaxed(reg, ddp->regs + offset); > + } I think this should be moved to an independent patch and its title is 'support maximum 64 mutex mod'. > return; > } > > @@ -307,6 +362,7 @@ void mtk_disp_mutex_remove_comp(struct mtk_disp_mutex *mutex, > struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp, > mutex[mutex->id]); > unsigned int reg; > + unsigned int offset; > > WARN_ON(&ddp->mutex[mutex->id] != mutex); > > @@ -318,9 +374,17 @@ void mtk_disp_mutex_remove_comp(struct mtk_disp_mutex *mutex, > ddp->regs + DISP_REG_MUTEX_SOF(mutex->id)); > break; > default: > - reg = readl_relaxed(ddp->regs + DISP_REG_MUTEX_MOD(mutex->id)); > - reg &= ~(ddp->mutex_mod[id]); > - writel_relaxed(reg, ddp->regs + DISP_REG_MUTEX_MOD(mutex->id)); > + if (ddp->mutex_mod[id] <= BIT(31)) { > + offset = DISP_REG_MUTEX_MOD(mutex->id); > + reg = readl_relaxed(ddp->regs + offset); > + reg &= ~(ddp->mutex_mod[id]); > + writel_relaxed(reg, ddp->regs + offset); > + } else { > + offset = DISP_REG_MUTEX_MOD2(mutex->id); > + reg = readl_relaxed(ddp->regs + offset); > + reg &= ~(ddp->mutex_mod[id] & ~BIT(31)); > + writel_relaxed(reg, ddp->regs + offset); > + } > break; > } > } > @@ -407,6 +471,7 @@ static int mtk_ddp_remove(struct platform_device *pdev) > > static const struct of_device_id ddp_driver_dt_match[] = { > { .compatible = "mediatek,mt2701-disp-mutex", .data = mt2701_mutex_mod}, > + { .compatible = "mediatek,mt2712-disp-mutex", .data = mt2712_mutex_mod}, > { .compatible = "mediatek,mt8173-disp-mutex", .data = mt8173_mutex_mod}, > {}, > }; > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c > index 4672317e3ad1..ebe8f0018b31 100644 > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c > @@ -219,6 +219,7 @@ struct mtk_ddp_comp_match { > > static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = { > [DDP_COMPONENT_AAL] = { MTK_DISP_AAL, 0, &ddp_aal }, > + [DDP_COMPONENT_AAL1] = { MTK_DISP_AAL, 1, &ddp_aal }, For the naming consistency, there are COLOR0 and COLOR1, so after you add 'AAL1', you should change AAL to AAL0. And this modification should be an independent patch. > [DDP_COMPONENT_BLS] = { MTK_DISP_BLS, 0, NULL }, > [DDP_COMPONENT_COLOR0] = { MTK_DISP_COLOR, 0, NULL }, > [DDP_COMPONENT_COLOR1] = { MTK_DISP_COLOR, 1, NULL }, > @@ -227,9 +228,12 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = { > [DDP_COMPONENT_DSI1] = { MTK_DSI, 1, NULL }, > [DDP_COMPONENT_GAMMA] = { MTK_DISP_GAMMA, 0, &ddp_gamma }, > [DDP_COMPONENT_OD] = { MTK_DISP_OD, 0, &ddp_od }, > + [DDP_COMPONENT_OD1] = { MTK_DISP_OD, 1, &ddp_od }, Ditto. > [DDP_COMPONENT_OVL0] = { MTK_DISP_OVL, 0, NULL }, > [DDP_COMPONENT_OVL1] = { MTK_DISP_OVL, 1, NULL }, > [DDP_COMPONENT_PWM0] = { MTK_DISP_PWM, 0, NULL }, > + [DDP_COMPONENT_PWM1] = { MTK_DISP_PWM, 1, NULL }, > + [DDP_COMPONENT_PWM2] = { MTK_DISP_PWM, 2, NULL }, > [DDP_COMPONENT_RDMA0] = { MTK_DISP_RDMA, 0, NULL }, > [DDP_COMPONENT_RDMA1] = { MTK_DISP_RDMA, 1, NULL }, > [DDP_COMPONENT_RDMA2] = { MTK_DISP_RDMA, 2, NULL }, > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h > index 0828cf8bf85c..43100f9215ae 100644 > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h > @@ -42,6 +42,7 @@ enum mtk_ddp_comp_type { > > enum mtk_ddp_comp_id { > DDP_COMPONENT_AAL, > + DDP_COMPONENT_AAL1, > DDP_COMPONENT_BLS, > DDP_COMPONENT_COLOR0, > DDP_COMPONENT_COLOR1, > @@ -50,10 +51,12 @@ enum mtk_ddp_comp_id { > DDP_COMPONENT_DSI1, > DDP_COMPONENT_GAMMA, > DDP_COMPONENT_OD, > + DDP_COMPONENT_OD1, > DDP_COMPONENT_OVL0, > DDP_COMPONENT_OVL1, > DDP_COMPONENT_PWM0, > DDP_COMPONENT_PWM1, > + DDP_COMPONENT_PWM2, > DDP_COMPONENT_RDMA0, > DDP_COMPONENT_RDMA1, > DDP_COMPONENT_RDMA2, > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c > index a2ca90fc403c..41baf6653bfc 100644 > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c > @@ -146,6 +146,32 @@ static const enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = { > DDP_COMPONENT_DPI0, > }; > > +static const enum mtk_ddp_comp_id mt2712_mtk_ddp_main[] = { > + DDP_COMPONENT_OVL0, > + DDP_COMPONENT_COLOR0, > + DDP_COMPONENT_AAL, > + DDP_COMPONENT_OD, > + DDP_COMPONENT_RDMA0, > + DDP_COMPONENT_DPI0, > + DDP_COMPONENT_PWM0, > +}; > + > +static const enum mtk_ddp_comp_id mt2712_mtk_ddp_ext[] = { > + DDP_COMPONENT_OVL1, > + DDP_COMPONENT_COLOR1, > + DDP_COMPONENT_AAL1, > + DDP_COMPONENT_OD1, > + DDP_COMPONENT_RDMA1, > + DDP_COMPONENT_DPI1, > + DDP_COMPONENT_PWM1, > +}; > + > +static const enum mtk_ddp_comp_id mt2712_mtk_ddp_third[] = { > + DDP_COMPONENT_RDMA2, > + DDP_COMPONENT_DSI2, > + DDP_COMPONENT_PWM2, > +}; > + It looks like that the path definition varies for each SoC. I think such definition should be passed from dts to prevent modify driver for each SoC. In [3], it define the partial connection in device tree, but I would like this to be more general. My idea is: 1. Each component has one or two endpoint in device tree. The first and the last has one, and the others has two. 2. Remove mtxxxx_mtk_ddp_main[] and mtxxxx_mtk_ddp_ext[], use multiple link list (One display path has one link list, two display path has two link list) to generate it by parsing device tree in mtk_drm_probe(). [3] https://patchwork.kernel.org/patch/10397337/ > static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = { > DDP_COMPONENT_OVL0, > DDP_COMPONENT_COLOR0, > @@ -173,6 +199,15 @@ static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = { > .shadow_register = true, > }; > > +static const struct mtk_mmsys_driver_data mt2712_mmsys_driver_data = { > + .main_path = mt2712_mtk_ddp_main, > + .main_len = ARRAY_SIZE(mt2712_mtk_ddp_main), > + .ext_path = mt2712_mtk_ddp_ext, > + .ext_len = ARRAY_SIZE(mt2712_mtk_ddp_ext), > + .third_path = mt2712_mtk_ddp_third, > + .third_len = ARRAY_SIZE(mt2712_mtk_ddp_third), > +}; > + > static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = { > .main_path = mt8173_mtk_ddp_main, > .main_len = ARRAY_SIZE(mt8173_mtk_ddp_main), > @@ -232,6 +267,11 @@ static int mtk_drm_kms_init(struct drm_device *drm) > if (ret < 0) > goto err_component_unbind; > > + ret = mtk_drm_crtc_create(drm, private->data->third_path, > + private->data->third_len); > + if (ret < 0) > + goto err_component_unbind; > + > /* Use OVL device for all DMA memory allocations */ > np = private->comp_node[private->data->main_path[0]] ?: > private->comp_node[private->data->ext_path[0]]; > @@ -372,8 +412,10 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = { > { .compatible = "mediatek,mt8173-disp-ufoe", .data = (void *)MTK_DISP_UFOE }, > { .compatible = "mediatek,mt2701-dsi", .data = (void *)MTK_DSI }, > { .compatible = "mediatek,mt8173-dsi", .data = (void *)MTK_DSI }, > + { .compatible = "mediatek,mt2712-dpi", .data = (void *)MTK_DPI }, Move this modification to the patch which modify the dpi driver for mt2712. > { .compatible = "mediatek,mt8173-dpi", .data = (void *)MTK_DPI }, > { .compatible = "mediatek,mt2701-disp-mutex", .data = (void *)MTK_DISP_MUTEX }, > + { .compatible = "mediatek,mt2712-disp-mutex", .data = (void *)MTK_DISP_MUTEX }, > { .compatible = "mediatek,mt8173-disp-mutex", .data = (void *)MTK_DISP_MUTEX }, > { .compatible = "mediatek,mt2701-disp-pwm", .data = (void *)MTK_DISP_BLS }, > { .compatible = "mediatek,mt8173-disp-pwm", .data = (void *)MTK_DISP_PWM }, > @@ -552,6 +594,8 @@ static SIMPLE_DEV_PM_OPS(mtk_drm_pm_ops, mtk_drm_sys_suspend, > static const struct of_device_id mtk_drm_of_ids[] = { > { .compatible = "mediatek,mt2701-mmsys", > .data = &mt2701_mmsys_driver_data}, > + { .compatible = "mediatek,mt2712-mmsys", > + .data = &mt2712_mmsys_driver_data}, > { .compatible = "mediatek,mt8173-mmsys", > .data = &mt8173_mmsys_driver_data}, > { } > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h > index c3378c452c0a..e821342bc2d3 100644 > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h > @@ -17,8 +17,8 @@ > #include <linux/io.h> > #include "mtk_drm_ddp_comp.h" > > -#define MAX_CRTC 2 > -#define MAX_CONNECTOR 2 > +#define MAX_CRTC 3 > +#define MAX_CONNECTOR 3 > > struct device; > struct device_node; > @@ -33,6 +33,9 @@ struct mtk_mmsys_driver_data { > unsigned int main_len; > const enum mtk_ddp_comp_id *ext_path; > unsigned int ext_len; > + enum mtk_ddp_comp_id *third_path; > + unsigned int third_len; > + > bool shadow_register; > }; > Regards, CK ^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 1/1] drm/mediatek: Add support for mediatek SOC MT2712 2018-05-15 2:30 ` [PATCH 1/1] drm/mediatek: Add support for mediatek SOC MT2712 CK Hu @ 2018-05-22 7:47 ` Stu Hsieh 2018-05-22 8:28 ` CK Hu 0 siblings, 1 reply; 3+ messages in thread From: Stu Hsieh @ 2018-05-22 7:47 UTC (permalink / raw) To: linux-arm-kernel Hi, CK: I've some reply for comment On Tue, 2018-05-15 at 10:30 +0800, CK Hu wrote: > Hi, Stu: > > I've some inline comments. > > On Mon, 2018-05-14 at 17:59 +0800, Stu Hsieh wrote: > > This patch add support for the Mediatek MT2712 DISP subsystem. > > There are two OVL engine and three disp output in MT2712. > > > > Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> > > --- > > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 77 ++++++++++++++++++++++++++--- > > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 4 ++ > > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 3 ++ > > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 44 +++++++++++++++++ > > drivers/gpu/drm/mediatek/mtk_drm_drv.h | 7 ++- > > 5 files changed, 127 insertions(+), 8 deletions(-) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > > index 8130f3dab661..641f4361b006 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > > @@ -29,6 +29,8 @@ > > #define DISP_REG_CONFIG_DISP_COLOR0_SEL_IN 0x084 > > #define DISP_REG_CONFIG_DISP_COLOR1_SEL_IN 0x088 > > #define DISP_REG_CONFIG_DPI_SEL_IN 0x0ac > > +#define DISP_REG_CONFIG_DISP_RDMA2_SOUT 0x0b8 > > +#define DISP_REG_CONFIG_DISP_RDMA0_MOUT_EN 0x0c4 > > #define DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN 0x0c8 > > #define DISP_REG_CONFIG_MMSYS_CG_CON0 0x100 > > > > @@ -41,6 +43,7 @@ > > #define DISP_REG_MUTEX_RST(n) (0x28 + 0x20 * (n)) > > #define DISP_REG_MUTEX_MOD(n) (0x2c + 0x20 * (n)) > > #define DISP_REG_MUTEX_SOF(n) (0x30 + 0x20 * (n)) > > +#define DISP_REG_MUTEX_MOD2(n) (0x34 + 0x20 * (n)) > > > > #define INT_MUTEX BIT(1) > > > > @@ -60,6 +63,25 @@ > > #define MT8173_MUTEX_MOD_DISP_PWM1 BIT(24) > > #define MT8173_MUTEX_MOD_DISP_OD BIT(25) > > > > +#define MT2712_MUTEX_MOD_DISP_OVL0 BIT(11) > > +#define MT2712_MUTEX_MOD_DISP_OVL1 BIT(12) > > +#define MT2712_MUTEX_MOD_DISP_RDMA0 BIT(13) > > +#define MT2712_MUTEX_MOD_DISP_RDMA1 BIT(14) > > +#define MT2712_MUTEX_MOD_DISP_RDMA2 BIT(15) > > +#define MT2712_MUTEX_MOD_DISP_WDMA0 BIT(16) > > +#define MT2712_MUTEX_MOD_DISP_WDMA1 BIT(17) > > +#define MT2712_MUTEX_MOD_DISP_COLOR0 BIT(18) > > +#define MT2712_MUTEX_MOD_DISP_COLOR1 BIT(19) > > +#define MT2712_MUTEX_MOD_DISP_AAL BIT(20) > > +#define MT2712_MUTEX_MOD_DISP_UFOE BIT(22) > > +#define MT2712_MUTEX_MOD_DISP_PWM0 BIT(23) > > +#define MT2712_MUTEX_MOD_DISP_PWM1 BIT(24) > > +#define MT2712_MUTEX_MOD_DISP_PWM2 BIT(10) > > +#define MT2712_MUTEX_MOD_DISP_OD BIT(25) > > +/* modules more than 32, add BIT(31) when using DISP_REG_MUTEX_MOD2 bit */ > > +#define MT2712_MUTEX_MOD2_DISP_AAL1 (BIT(1) | BIT(31)) > > +#define MT2712_MUTEX_MOD2_DISP_OD1 (BIT(2) | BIT(31)) > > + > > It looks like that MUTEX_MOD definition varies for each SoC. I think > such definition should be passed from dts to prevent modify driver for > each SoC. For example, the clock definition varies for each SoC, and its > definition is placed in [1]. The dts [2] include the header file and > pass the clock definition to driver. > [1] > https://elixir.bootlin.com/linux/v4.17-rc5/source/include/dt-bindings/clock/mt2712-clk.h > [2] > https://elixir.bootlin.com/linux/v4.17-rc5/source/arch/arm64/boot/dts/mediatek/mt2712e.dtsi > This idea is good but weak relation for this MT2712 patch In the future, we would commit other patch serial for this issue > > #define MT2701_MUTEX_MOD_DISP_OVL BIT(3) > > #define MT2701_MUTEX_MOD_DISP_WDMA BIT(6) > > #define MT2701_MUTEX_MOD_DISP_COLOR BIT(7) > > @@ -74,6 +96,7 @@ > > > > #define OVL0_MOUT_EN_COLOR0 0x1 > > #define OD_MOUT_EN_RDMA0 0x1 > > +#define OD1_MOUT_EN_RDMA1 BIT(16) > > #define UFOE_MOUT_EN_DSI0 0x1 > > #define COLOR0_SEL_IN_OVL0 0x1 > > #define OVL1_MOUT_EN_COLOR1 0x1 > > @@ -108,6 +131,26 @@ static const unsigned int mt2701_mutex_mod[DDP_COMPONENT_ID_MAX] = { > > [DDP_COMPONENT_WDMA0] = MT2701_MUTEX_MOD_DISP_WDMA, > > }; > > > > +static const unsigned int mt2712_mutex_mod[DDP_COMPONENT_ID_MAX] = { > > + [DDP_COMPONENT_AAL] = MT2712_MUTEX_MOD_DISP_AAL, > > + [DDP_COMPONENT_AAL1] = MT2712_MUTEX_MOD2_DISP_AAL1, > > + [DDP_COMPONENT_COLOR0] = MT2712_MUTEX_MOD_DISP_COLOR0, > > + [DDP_COMPONENT_COLOR1] = MT2712_MUTEX_MOD_DISP_COLOR1, > > + [DDP_COMPONENT_OD] = MT2712_MUTEX_MOD_DISP_OD, > > + [DDP_COMPONENT_OD1] = MT2712_MUTEX_MOD2_DISP_OD1, > > + [DDP_COMPONENT_OVL0] = MT2712_MUTEX_MOD_DISP_OVL0, > > + [DDP_COMPONENT_OVL1] = MT2712_MUTEX_MOD_DISP_OVL1, > > + [DDP_COMPONENT_PWM0] = MT2712_MUTEX_MOD_DISP_PWM0, > > + [DDP_COMPONENT_PWM1] = MT2712_MUTEX_MOD_DISP_PWM1, > > + [DDP_COMPONENT_PWM2] = MT2712_MUTEX_MOD_DISP_PWM2, > > + [DDP_COMPONENT_RDMA0] = MT2712_MUTEX_MOD_DISP_RDMA0, > > + [DDP_COMPONENT_RDMA1] = MT2712_MUTEX_MOD_DISP_RDMA1, > > + [DDP_COMPONENT_RDMA2] = MT2712_MUTEX_MOD_DISP_RDMA2, > > + [DDP_COMPONENT_UFOE] = MT2712_MUTEX_MOD_DISP_UFOE, > > + [DDP_COMPONENT_WDMA0] = MT2712_MUTEX_MOD_DISP_WDMA0, > > + [DDP_COMPONENT_WDMA1] = MT2712_MUTEX_MOD_DISP_WDMA1, > > +}; > > + > > static const unsigned int mt8173_mutex_mod[DDP_COMPONENT_ID_MAX] = { > > [DDP_COMPONENT_AAL] = MT8173_MUTEX_MOD_DISP_AAL, > > [DDP_COMPONENT_COLOR0] = MT8173_MUTEX_MOD_DISP_COLOR0, > > @@ -150,6 +193,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur, > > } else if (cur == DDP_COMPONENT_GAMMA && next == DDP_COMPONENT_RDMA1) { > > *addr = DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN; > > value = GAMMA_MOUT_EN_RDMA1; > > + } else if (cur == DDP_COMPONENT_OD1 && next == DDP_COMPONENT_RDMA1) { > > + *addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN; > > + value = OD1_MOUT_EN_RDMA1; > > I think this should be moved to an independent patch and its title is > 'add connection from OD1 to RDMA1'. ok > > > } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) { > > *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN; > > value = RDMA1_MOUT_DPI0; > > @@ -278,6 +324,7 @@ void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex, > > struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp, > > mutex[mutex->id]); > > unsigned int reg; > > + unsigned int offset; > > > > WARN_ON(&ddp->mutex[mutex->id] != mutex); > > > > @@ -292,9 +339,17 @@ void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex, > > reg = MUTEX_SOF_DPI0; > > break; > > default: > > - reg = readl_relaxed(ddp->regs + DISP_REG_MUTEX_MOD(mutex->id)); > > - reg |= ddp->mutex_mod[id]; > > - writel_relaxed(reg, ddp->regs + DISP_REG_MUTEX_MOD(mutex->id)); > > + if (ddp->mutex_mod[id] <= BIT(31)) { > > You could reduce one byte if you write as ok > if (ddp->mutex_mod[id] < BIT(32)) > > > + offset = DISP_REG_MUTEX_MOD(mutex->id); > > + reg = readl_relaxed(ddp->regs + offset); > > + reg |= ddp->mutex_mod[id]; > > + writel_relaxed(reg, ddp->regs + offset); > > + } else { > > + offset = DISP_REG_MUTEX_MOD2(mutex->id); > > + reg = readl_relaxed(ddp->regs + offset); > > + reg |= (ddp->mutex_mod[id] & ~BIT(31)); > > + writel_relaxed(reg, ddp->regs + offset); > > + } > > I think this should be moved to an independent patch and its title is > 'support maximum 64 mutex mod'. ok > > > return; > > } > > > > @@ -307,6 +362,7 @@ void mtk_disp_mutex_remove_comp(struct mtk_disp_mutex *mutex, > > struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp, > > mutex[mutex->id]); > > unsigned int reg; > > + unsigned int offset; > > > > WARN_ON(&ddp->mutex[mutex->id] != mutex); > > > > @@ -318,9 +374,17 @@ void mtk_disp_mutex_remove_comp(struct mtk_disp_mutex *mutex, > > ddp->regs + DISP_REG_MUTEX_SOF(mutex->id)); > > break; > > default: > > - reg = readl_relaxed(ddp->regs + DISP_REG_MUTEX_MOD(mutex->id)); > > - reg &= ~(ddp->mutex_mod[id]); > > - writel_relaxed(reg, ddp->regs + DISP_REG_MUTEX_MOD(mutex->id)); > > + if (ddp->mutex_mod[id] <= BIT(31)) { > > + offset = DISP_REG_MUTEX_MOD(mutex->id); > > + reg = readl_relaxed(ddp->regs + offset); > > + reg &= ~(ddp->mutex_mod[id]); > > + writel_relaxed(reg, ddp->regs + offset); > > + } else { > > + offset = DISP_REG_MUTEX_MOD2(mutex->id); > > + reg = readl_relaxed(ddp->regs + offset); > > + reg &= ~(ddp->mutex_mod[id] & ~BIT(31)); > > + writel_relaxed(reg, ddp->regs + offset); > > + } > > break; > > } > > } > > @@ -407,6 +471,7 @@ static int mtk_ddp_remove(struct platform_device *pdev) > > > > static const struct of_device_id ddp_driver_dt_match[] = { > > { .compatible = "mediatek,mt2701-disp-mutex", .data = mt2701_mutex_mod}, > > + { .compatible = "mediatek,mt2712-disp-mutex", .data = mt2712_mutex_mod}, > > { .compatible = "mediatek,mt8173-disp-mutex", .data = mt8173_mutex_mod}, > > {}, > > }; > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c > > index 4672317e3ad1..ebe8f0018b31 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c > > @@ -219,6 +219,7 @@ struct mtk_ddp_comp_match { > > > > static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = { > > [DDP_COMPONENT_AAL] = { MTK_DISP_AAL, 0, &ddp_aal }, > > + [DDP_COMPONENT_AAL1] = { MTK_DISP_AAL, 1, &ddp_aal }, > > For the naming consistency, there are COLOR0 and COLOR1, so after you > add 'AAL1', you should change AAL to AAL0. And this modification should > be an independent patch. ok > > > [DDP_COMPONENT_BLS] = { MTK_DISP_BLS, 0, NULL }, > > [DDP_COMPONENT_COLOR0] = { MTK_DISP_COLOR, 0, NULL }, > > [DDP_COMPONENT_COLOR1] = { MTK_DISP_COLOR, 1, NULL }, > > @@ -227,9 +228,12 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = { > > [DDP_COMPONENT_DSI1] = { MTK_DSI, 1, NULL }, > > [DDP_COMPONENT_GAMMA] = { MTK_DISP_GAMMA, 0, &ddp_gamma }, > > [DDP_COMPONENT_OD] = { MTK_DISP_OD, 0, &ddp_od }, > > + [DDP_COMPONENT_OD1] = { MTK_DISP_OD, 1, &ddp_od }, > > Ditto. ok > > > [DDP_COMPONENT_OVL0] = { MTK_DISP_OVL, 0, NULL }, > > [DDP_COMPONENT_OVL1] = { MTK_DISP_OVL, 1, NULL }, > > [DDP_COMPONENT_PWM0] = { MTK_DISP_PWM, 0, NULL }, > > + [DDP_COMPONENT_PWM1] = { MTK_DISP_PWM, 1, NULL }, > > + [DDP_COMPONENT_PWM2] = { MTK_DISP_PWM, 2, NULL }, > > [DDP_COMPONENT_RDMA0] = { MTK_DISP_RDMA, 0, NULL }, > > [DDP_COMPONENT_RDMA1] = { MTK_DISP_RDMA, 1, NULL }, > > [DDP_COMPONENT_RDMA2] = { MTK_DISP_RDMA, 2, NULL }, > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h > > index 0828cf8bf85c..43100f9215ae 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h > > @@ -42,6 +42,7 @@ enum mtk_ddp_comp_type { > > > > enum mtk_ddp_comp_id { > > DDP_COMPONENT_AAL, > > + DDP_COMPONENT_AAL1, > > DDP_COMPONENT_BLS, > > DDP_COMPONENT_COLOR0, > > DDP_COMPONENT_COLOR1, > > @@ -50,10 +51,12 @@ enum mtk_ddp_comp_id { > > DDP_COMPONENT_DSI1, > > DDP_COMPONENT_GAMMA, > > DDP_COMPONENT_OD, > > + DDP_COMPONENT_OD1, > > DDP_COMPONENT_OVL0, > > DDP_COMPONENT_OVL1, > > DDP_COMPONENT_PWM0, > > DDP_COMPONENT_PWM1, > > + DDP_COMPONENT_PWM2, > > DDP_COMPONENT_RDMA0, > > DDP_COMPONENT_RDMA1, > > DDP_COMPONENT_RDMA2, > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c > > index a2ca90fc403c..41baf6653bfc 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c > > @@ -146,6 +146,32 @@ static const enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = { > > DDP_COMPONENT_DPI0, > > }; > > > > +static const enum mtk_ddp_comp_id mt2712_mtk_ddp_main[] = { > > + DDP_COMPONENT_OVL0, > > + DDP_COMPONENT_COLOR0, > > + DDP_COMPONENT_AAL, > > + DDP_COMPONENT_OD, > > + DDP_COMPONENT_RDMA0, > > + DDP_COMPONENT_DPI0, > > + DDP_COMPONENT_PWM0, > > +}; > > + > > +static const enum mtk_ddp_comp_id mt2712_mtk_ddp_ext[] = { > > + DDP_COMPONENT_OVL1, > > + DDP_COMPONENT_COLOR1, > > + DDP_COMPONENT_AAL1, > > + DDP_COMPONENT_OD1, > > + DDP_COMPONENT_RDMA1, > > + DDP_COMPONENT_DPI1, > > + DDP_COMPONENT_PWM1, > > +}; > > + > > +static const enum mtk_ddp_comp_id mt2712_mtk_ddp_third[] = { > > + DDP_COMPONENT_RDMA2, > > + DDP_COMPONENT_DSI2, > > + DDP_COMPONENT_PWM2, > > +}; > > + > > It looks like that the path definition varies for each SoC. I think such > definition should be passed from dts to prevent modify driver for each > SoC. In [3], it define the partial connection in device tree, but I > would like this to be more general. My idea is: > > 1. Each component has one or two endpoint in device tree. The first and > the last has one, and the others has two. > 2. Remove mtxxxx_mtk_ddp_main[] and mtxxxx_mtk_ddp_ext[], use multiple > link list (One display path has one link list, two display path has two > link list) to generate it by parsing device tree in mtk_drm_probe(). > > [3] https://patchwork.kernel.org/patch/10397337/ > In the future, we would commit other patch serial for this issue. Moreover, in addition to using dts and link list to establish the ddp path, we want to design a new mechanism to add/remove the component into this ddp path for run time > > static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = { > > DDP_COMPONENT_OVL0, > > DDP_COMPONENT_COLOR0, > > @@ -173,6 +199,15 @@ static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = { > > .shadow_register = true, > > }; > > > > +static const struct mtk_mmsys_driver_data mt2712_mmsys_driver_data = { > > + .main_path = mt2712_mtk_ddp_main, > > + .main_len = ARRAY_SIZE(mt2712_mtk_ddp_main), > > + .ext_path = mt2712_mtk_ddp_ext, > > + .ext_len = ARRAY_SIZE(mt2712_mtk_ddp_ext), > > + .third_path = mt2712_mtk_ddp_third, > > + .third_len = ARRAY_SIZE(mt2712_mtk_ddp_third), > > +}; > > + > > static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = { > > .main_path = mt8173_mtk_ddp_main, > > .main_len = ARRAY_SIZE(mt8173_mtk_ddp_main), > > @@ -232,6 +267,11 @@ static int mtk_drm_kms_init(struct drm_device *drm) > > if (ret < 0) > > goto err_component_unbind; > > > > + ret = mtk_drm_crtc_create(drm, private->data->third_path, > > + private->data->third_len); > > + if (ret < 0) > > + goto err_component_unbind; > > + > > /* Use OVL device for all DMA memory allocations */ > > np = private->comp_node[private->data->main_path[0]] ?: > > private->comp_node[private->data->ext_path[0]]; > > @@ -372,8 +412,10 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = { > > { .compatible = "mediatek,mt8173-disp-ufoe", .data = (void *)MTK_DISP_UFOE }, > > { .compatible = "mediatek,mt2701-dsi", .data = (void *)MTK_DSI }, > > { .compatible = "mediatek,mt8173-dsi", .data = (void *)MTK_DSI }, > > + { .compatible = "mediatek,mt2712-dpi", .data = (void *)MTK_DPI }, > > Move this modification to the patch which modify the dpi driver for > mt2712. ok > > > { .compatible = "mediatek,mt8173-dpi", .data = (void *)MTK_DPI }, > > { .compatible = "mediatek,mt2701-disp-mutex", .data = (void *)MTK_DISP_MUTEX }, > > + { .compatible = "mediatek,mt2712-disp-mutex", .data = (void *)MTK_DISP_MUTEX }, > > { .compatible = "mediatek,mt8173-disp-mutex", .data = (void *)MTK_DISP_MUTEX }, > > { .compatible = "mediatek,mt2701-disp-pwm", .data = (void *)MTK_DISP_BLS }, > > { .compatible = "mediatek,mt8173-disp-pwm", .data = (void *)MTK_DISP_PWM }, > > @@ -552,6 +594,8 @@ static SIMPLE_DEV_PM_OPS(mtk_drm_pm_ops, mtk_drm_sys_suspend, > > static const struct of_device_id mtk_drm_of_ids[] = { > > { .compatible = "mediatek,mt2701-mmsys", > > .data = &mt2701_mmsys_driver_data}, > > + { .compatible = "mediatek,mt2712-mmsys", > > + .data = &mt2712_mmsys_driver_data}, > > { .compatible = "mediatek,mt8173-mmsys", > > .data = &mt8173_mmsys_driver_data}, > > { } > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h > > index c3378c452c0a..e821342bc2d3 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h > > @@ -17,8 +17,8 @@ > > #include <linux/io.h> > > #include "mtk_drm_ddp_comp.h" > > > > -#define MAX_CRTC 2 > > -#define MAX_CONNECTOR 2 > > +#define MAX_CRTC 3 > > +#define MAX_CONNECTOR 3 > > > > struct device; > > struct device_node; > > @@ -33,6 +33,9 @@ struct mtk_mmsys_driver_data { > > unsigned int main_len; > > const enum mtk_ddp_comp_id *ext_path; > > unsigned int ext_len; > > + enum mtk_ddp_comp_id *third_path; > > + unsigned int third_len; > > + > > bool shadow_register; > > }; > > > > Regards, > CK > Regards, Stu ^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 1/1] drm/mediatek: Add support for mediatek SOC MT2712 2018-05-22 7:47 ` Stu Hsieh @ 2018-05-22 8:28 ` CK Hu 0 siblings, 0 replies; 3+ messages in thread From: CK Hu @ 2018-05-22 8:28 UTC (permalink / raw) To: linux-arm-kernel Hi, Stu: On Tue, 2018-05-22 at 15:47 +0800, Stu Hsieh wrote: > Hi, CK: > > I've some reply for comment > > On Tue, 2018-05-15 at 10:30 +0800, CK Hu wrote: > > Hi, Stu: > > > > I've some inline comments. > > > > On Mon, 2018-05-14 at 17:59 +0800, Stu Hsieh wrote: > > > This patch add support for the Mediatek MT2712 DISP subsystem. > > > There are two OVL engine and three disp output in MT2712. > > > > > > Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> > > > --- > > > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 77 ++++++++++++++++++++++++++--- > > > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 4 ++ > > > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 3 ++ > > > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 44 +++++++++++++++++ > > > drivers/gpu/drm/mediatek/mtk_drm_drv.h | 7 ++- > > > 5 files changed, 127 insertions(+), 8 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > > > index 8130f3dab661..641f4361b006 100644 > > > > > > #define INT_MUTEX BIT(1) > > > > > > @@ -60,6 +63,25 @@ > > > #define MT8173_MUTEX_MOD_DISP_PWM1 BIT(24) > > > #define MT8173_MUTEX_MOD_DISP_OD BIT(25) > > > > > > +#define MT2712_MUTEX_MOD_DISP_OVL0 BIT(11) > > > +#define MT2712_MUTEX_MOD_DISP_OVL1 BIT(12) > > > +#define MT2712_MUTEX_MOD_DISP_RDMA0 BIT(13) > > > +#define MT2712_MUTEX_MOD_DISP_RDMA1 BIT(14) > > > +#define MT2712_MUTEX_MOD_DISP_RDMA2 BIT(15) > > > +#define MT2712_MUTEX_MOD_DISP_WDMA0 BIT(16) > > > +#define MT2712_MUTEX_MOD_DISP_WDMA1 BIT(17) > > > +#define MT2712_MUTEX_MOD_DISP_COLOR0 BIT(18) > > > +#define MT2712_MUTEX_MOD_DISP_COLOR1 BIT(19) > > > +#define MT2712_MUTEX_MOD_DISP_AAL BIT(20) > > > +#define MT2712_MUTEX_MOD_DISP_UFOE BIT(22) > > > +#define MT2712_MUTEX_MOD_DISP_PWM0 BIT(23) > > > +#define MT2712_MUTEX_MOD_DISP_PWM1 BIT(24) > > > +#define MT2712_MUTEX_MOD_DISP_PWM2 BIT(10) > > > +#define MT2712_MUTEX_MOD_DISP_OD BIT(25) > > > +/* modules more than 32, add BIT(31) when using DISP_REG_MUTEX_MOD2 bit */ > > > +#define MT2712_MUTEX_MOD2_DISP_AAL1 (BIT(1) | BIT(31)) > > > +#define MT2712_MUTEX_MOD2_DISP_OD1 (BIT(2) | BIT(31)) > > > + > > > > It looks like that MUTEX_MOD definition varies for each SoC. I think > > such definition should be passed from dts to prevent modify driver for > > each SoC. For example, the clock definition varies for each SoC, and its > > definition is placed in [1]. The dts [2] include the header file and > > pass the clock definition to driver. > > [1] > > https://elixir.bootlin.com/linux/v4.17-rc5/source/include/dt-bindings/clock/mt2712-clk.h > > [2] > > https://elixir.bootlin.com/linux/v4.17-rc5/source/arch/arm64/boot/dts/mediatek/mt2712e.dtsi > > > This idea is good but weak relation for this MT2712 patch > In the future, we would commit other patch serial for this issue > If you have a plan to pass these definition from device tree, for me, it's ok to temporarily write down the definition in driver. > > > #define MT2701_MUTEX_MOD_DISP_OVL BIT(3) > > > #define MT2701_MUTEX_MOD_DISP_WDMA BIT(6) > > > #define MT2701_MUTEX_MOD_DISP_COLOR BIT(7) > > > @@ -74,6 +96,7 @@ > > > > > > #define OVL0_MOUT_EN_COLOR0 0x1 > > > #define OD_MOUT_EN_RDMA0 0x1 > > > +#define OD1_MOUT_EN_RDMA1 BIT(16) > > > #define UFOE_MOUT_EN_DSI0 0x1 > > > #define COLOR0_SEL_IN_OVL0 0x1 > > > #define OVL1_MOUT_EN_COLOR1 0x1 > > > @@ -108,6 +131,26 @@ static const unsigned int mt2701_mutex_mod[DDP_COMPONENT_ID_MAX] = { > > > [DDP_COMPONENT_WDMA0] = MT2701_MUTEX_MOD_DISP_WDMA, > > > }; > > > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c > > > index a2ca90fc403c..41baf6653bfc 100644 > > > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c > > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c > > > @@ -146,6 +146,32 @@ static const enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = { > > > DDP_COMPONENT_DPI0, > > > }; > > > > > > +static const enum mtk_ddp_comp_id mt2712_mtk_ddp_main[] = { > > > + DDP_COMPONENT_OVL0, > > > + DDP_COMPONENT_COLOR0, > > > + DDP_COMPONENT_AAL, > > > + DDP_COMPONENT_OD, > > > + DDP_COMPONENT_RDMA0, > > > + DDP_COMPONENT_DPI0, > > > + DDP_COMPONENT_PWM0, > > > +}; > > > + > > > +static const enum mtk_ddp_comp_id mt2712_mtk_ddp_ext[] = { > > > + DDP_COMPONENT_OVL1, > > > + DDP_COMPONENT_COLOR1, > > > + DDP_COMPONENT_AAL1, > > > + DDP_COMPONENT_OD1, > > > + DDP_COMPONENT_RDMA1, > > > + DDP_COMPONENT_DPI1, > > > + DDP_COMPONENT_PWM1, > > > +}; > > > + > > > +static const enum mtk_ddp_comp_id mt2712_mtk_ddp_third[] = { > > > + DDP_COMPONENT_RDMA2, > > > + DDP_COMPONENT_DSI2, > > > + DDP_COMPONENT_PWM2, > > > +}; > > > + > > > > It looks like that the path definition varies for each SoC. I think such > > definition should be passed from dts to prevent modify driver for each > > SoC. In [3], it define the partial connection in device tree, but I > > would like this to be more general. My idea is: > > > > 1. Each component has one or two endpoint in device tree. The first and > > the last has one, and the others has two. > > 2. Remove mtxxxx_mtk_ddp_main[] and mtxxxx_mtk_ddp_ext[], use multiple > > link list (One display path has one link list, two display path has two > > link list) to generate it by parsing device tree in mtk_drm_probe(). > > > > [3] https://patchwork.kernel.org/patch/10397337/ > > > In the future, we would commit other patch serial for this issue. > Moreover, in addition to using dts and link list to establish the ddp > path, we want to design a new mechanism to add/remove the component into > this ddp path for run time > If you have a plan to pass the routine from device tree, for me, it's ok to temporarily write down the routine in driver. Regards, CK > > > static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = { > > > DDP_COMPONENT_OVL0, > > > DDP_COMPONENT_COLOR0, > > > @@ -173,6 +199,15 @@ static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = { > > > .shadow_register = true, > > > }; > > > > > > +static const struct mtk_mmsys_driver_data mt2712_mmsys_driver_data = { > > > + .main_path = mt2712_mtk_ddp_main, > > > + .main_len = ARRAY_SIZE(mt2712_mtk_ddp_main), > > > + .ext_path = mt2712_mtk_ddp_ext, > > > + .ext_len = ARRAY_SIZE(mt2712_mtk_ddp_ext), > > > + .third_path = mt2712_mtk_ddp_third, > > > + .third_len = ARRAY_SIZE(mt2712_mtk_ddp_third), > > > +}; > > > + > > > static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = { > > > .main_path = mt8173_mtk_ddp_main, > > > .main_len = ARRAY_SIZE(mt8173_mtk_ddp_main), > > > @@ -232,6 +267,11 @@ static int mtk_drm_kms_init(struct drm_device *drm) > > > if (ret < 0) > > > goto err_component_unbind; > > > > > > + ret = mtk_drm_crtc_create(drm, private->data->third_path, > > > + private->data->third_len); > > > + if (ret < 0) > > > + goto err_component_unbind; > > > + > > > /* Use OVL device for all DMA memory allocations */ > > > np = private->comp_node[private->data->main_path[0]] ?: > > > private->comp_node[private->data->ext_path[0]]; > > > @@ -372,8 +412,10 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = { > > > { .compatible = "mediatek,mt8173-disp-ufoe", .data = (void *)MTK_DISP_UFOE }, > > > { .compatible = "mediatek,mt2701-dsi", .data = (void *)MTK_DSI }, > > > { .compatible = "mediatek,mt8173-dsi", .data = (void *)MTK_DSI }, > > > + { .compatible = "mediatek,mt2712-dpi", .data = (void *)MTK_DPI }, > > > > Move this modification to the patch which modify the dpi driver for > > mt2712. > ok > > > > > { .compatible = "mediatek,mt8173-dpi", .data = (void *)MTK_DPI }, > > > { .compatible = "mediatek,mt2701-disp-mutex", .data = (void *)MTK_DISP_MUTEX }, > > > + { .compatible = "mediatek,mt2712-disp-mutex", .data = (void *)MTK_DISP_MUTEX }, > > > { .compatible = "mediatek,mt8173-disp-mutex", .data = (void *)MTK_DISP_MUTEX }, > > > { .compatible = "mediatek,mt2701-disp-pwm", .data = (void *)MTK_DISP_BLS }, > > > { .compatible = "mediatek,mt8173-disp-pwm", .data = (void *)MTK_DISP_PWM }, > > > @@ -552,6 +594,8 @@ static SIMPLE_DEV_PM_OPS(mtk_drm_pm_ops, mtk_drm_sys_suspend, > > > static const struct of_device_id mtk_drm_of_ids[] = { > > > { .compatible = "mediatek,mt2701-mmsys", > > > .data = &mt2701_mmsys_driver_data}, > > > + { .compatible = "mediatek,mt2712-mmsys", > > > + .data = &mt2712_mmsys_driver_data}, > > > { .compatible = "mediatek,mt8173-mmsys", > > > .data = &mt8173_mmsys_driver_data}, > > > { } > > > > Regards, > > CK > > > > Regards, > Stu > ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-05-22 8:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20180514095910.22618-1-stu.hsieh@mediatek.com>
[not found] ` <20180514095910.22618-2-stu.hsieh@mediatek.com>
2018-05-15 2:30 ` [PATCH 1/1] drm/mediatek: Add support for mediatek SOC MT2712 CK Hu
2018-05-22 7:47 ` Stu Hsieh
2018-05-22 8:28 ` CK Hu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).