linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: david.wu@rock-chips.com (David Wu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ethernet: stmmac: dwmac-rk: Add GMAC support for px30
Date: Wed, 16 May 2018 11:38:45 +0800	[thread overview]
Message-ID: <1526441925-12654-1-git-send-email-david.wu@rock-chips.com> (raw)

Add constants and callback functions for the dwmac on px30 soc.
The base structure is the same, but registers and the bits in
them moved slightly, and add the clk_mac_speed for the select
of mac speed.

Signed-off-by: David Wu <david.wu@rock-chips.com>
---
 .../devicetree/bindings/net/rockchip-dwmac.txt     |  1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c     | 64 ++++++++++++++++++++++
 2 files changed, 65 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
index 9c16ee2..3b71da7 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
@@ -4,6 +4,7 @@ The device node has following properties.
 
 Required properties:
  - compatible: should be "rockchip,<name>-gamc"
+   "rockchip,px30-gmac":   found on PX30 SoCs
    "rockchip,rk3128-gmac": found on RK312x SoCs
    "rockchip,rk3228-gmac": found on RK322x SoCs
    "rockchip,rk3288-gmac": found on RK3288 SoCs
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 13133b3..4b2ab71 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -61,6 +61,7 @@ struct rk_priv_data {
 	struct clk *mac_clk_tx;
 	struct clk *clk_mac_ref;
 	struct clk *clk_mac_refout;
+	struct clk *clk_mac_speed;
 	struct clk *aclk_mac;
 	struct clk *pclk_mac;
 	struct clk *clk_phy;
@@ -83,6 +84,64 @@ struct rk_priv_data {
 	(((tx) ? soc##_GMAC_TXCLK_DLY_ENABLE : soc##_GMAC_TXCLK_DLY_DISABLE) | \
 	 ((rx) ? soc##_GMAC_RXCLK_DLY_ENABLE : soc##_GMAC_RXCLK_DLY_DISABLE))
 
+#define PX30_GRF_GMAC_CON1		0X0904
+
+/* PX30_GRF_GMAC_CON1 */
+#define PX30_GMAC_PHY_INTF_SEL_RMII	(GRF_CLR_BIT(4) | GRF_CLR_BIT(5) | \
+					GRF_BIT(6))
+#define PX30_GMAC_SPEED_10M		GRF_CLR_BIT(2)
+#define PX30_GMAC_SPEED_100M		GRF_BIT(2)
+
+static void px30_set_to_rmii(struct rk_priv_data *bsp_priv)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+
+	if (IS_ERR(bsp_priv->grf)) {
+		dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+		return;
+	}
+
+	regmap_write(bsp_priv->grf, PX30_GRF_GMAC_CON1,
+		     PX30_GMAC_PHY_INTF_SEL_RMII);
+}
+
+static void px30_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+	int ret;
+
+	if (IS_ERR(bsp_priv->clk_mac_speed)) {
+		dev_err(dev, "%s: Missing clk_mac_speed clock\n", __func__);
+		return;
+	}
+
+	if (speed == 10) {
+		regmap_write(bsp_priv->grf, PX30_GRF_GMAC_CON1,
+			     PX30_GMAC_SPEED_10M);
+
+		ret = clk_set_rate(bsp_priv->clk_mac_speed, 2500000);
+		if (ret)
+			dev_err(dev, "%s: set clk_mac_speed rate 2500000 failed: %d\n",
+				__func__, ret);
+	} else if (speed == 100) {
+		regmap_write(bsp_priv->grf, PX30_GRF_GMAC_CON1,
+			     PX30_GMAC_SPEED_100M);
+
+		ret = clk_set_rate(bsp_priv->clk_mac_speed, 25000000);
+		if (ret)
+			dev_err(dev, "%s: set clk_mac_speed rate 25000000 failed: %d\n",
+				__func__, ret);
+
+	} else {
+		dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
+	}
+}
+
+static const struct rk_gmac_ops px30_ops = {
+	.set_to_rmii = px30_set_to_rmii,
+	.set_rmii_speed = px30_set_rmii_speed,
+};
+
 #define RK3128_GRF_MAC_CON0	0x0168
 #define RK3128_GRF_MAC_CON1	0x016c
 
@@ -1042,6 +1101,10 @@ static int rk_gmac_clk_init(struct plat_stmmacenet_data *plat)
 		}
 	}
 
+	bsp_priv->clk_mac_speed = devm_clk_get(dev, "clk_mac_speed");
+	if (IS_ERR(bsp_priv->clk_mac_speed))
+		dev_err(dev, "cannot get clock %s\n", "clk_mac_speed");
+
 	if (bsp_priv->clock_input) {
 		dev_info(dev, "clock input from PHY\n");
 	} else {
@@ -1424,6 +1487,7 @@ static int rk_gmac_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(rk_gmac_pm_ops, rk_gmac_suspend, rk_gmac_resume);
 
 static const struct of_device_id rk_gmac_dwmac_match[] = {
+	{ .compatible = "rockchip,px30-gmac",	.data = &px30_ops   },
 	{ .compatible = "rockchip,rk3128-gmac", .data = &rk3128_ops },
 	{ .compatible = "rockchip,rk3228-gmac", .data = &rk3228_ops },
 	{ .compatible = "rockchip,rk3288-gmac", .data = &rk3288_ops },
-- 
2.7.4

             reply	other threads:[~2018-05-16  3:38 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-16  3:38 David Wu [this message]
2018-05-16  6:34 ` [PATCH] ethernet: stmmac: dwmac-rk: Add GMAC support for px30 Shawn Lin
2018-05-17 14:52   ` David Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526441925-12654-1-git-send-email-david.wu@rock-chips.com \
    --to=david.wu@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).