[PATCH v3 3/6] watchdog: sp805: add 'timeout-sec' DT property support

[ray.jui@broadcom.com (Ray Jui)]

Add support for optional devicetree property 'timeout-sec'.
'timeout-sec' is used in the driver if specified in devicetree.
Otherwise, fall back to driver default, i.e., 60 seconds

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/watchdog/sp805_wdt.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 03805bc..1484609 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -230,7 +230,14 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
 	spin_lock_init(&wdt->lock);
 	watchdog_set_nowayout(&wdt->wdd, nowayout);
 	watchdog_set_drvdata(&wdt->wdd, wdt);
-	wdt_setload(&wdt->wdd, DEFAULT_TIMEOUT);
+
+	/*
+	 * If 'timeout-sec' devicetree property is specified, use that.
+	 * Otherwise, use DEFAULT_TIMEOUT
+	 */
+	wdt->wdd.timeout = DEFAULT_TIMEOUT;
+	watchdog_init_timeout(&wdt->wdd, 0, &adev->dev);
+	wdt_setload(&wdt->wdd, wdt->wdd.timeout);
 
 	ret = watchdog_register_device(&wdt->wdd);
 	if (ret) {
-- 
2.1.4