From mboxrd@z Thu Jan 1 00:00:00 1970 From: m.purski@samsung.com (Maciej Purski) Date: Tue, 19 Jun 2018 10:19:25 +0200 Subject: [PATCH v3 4/9] dt-bindings: display: add DT bindings for BOE HV070WSA-100 panel In-Reply-To: <1529396370-18761-1-git-send-email-m.purski@samsung.com> References: <1529396370-18761-1-git-send-email-m.purski@samsung.com> Message-ID: <1529396370-18761-5-git-send-email-m.purski@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Andrzej Hajda The patch adds bindings to BOE HV070-WSA WSVGA panel. Bindings are compatible with simple panel bindings. Signed-off-by: Andrzej Hajda Signed-off-by: Maciej Purski --- .../bindings/display/panel/boe,hv070wsa-100.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt diff --git a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt new file mode 100644 index 0000000..9e8eea8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt @@ -0,0 +1,28 @@ +BOE HV070WSA-100 7.01" WSVGA TFT LCD panel + +Required properties: +- compatible: should be "boe,hv070wsa-100" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) +- enable-gpio: GPIO pin to enable and disable panel (active high) + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in [1]. This +node should describe panel's video bus. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + panel: panel { + compatible = "boe,hv070wsa-100"; + power-supply = <&vcc_3v3_reg>; + enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; + port { + panel_ep: endpoint { + remote-endpoint = <&bridge_out_ep>; + }; + }; + }; -- 2.7.4