From: festevam@gmail.com (Fabio Estevam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: imx51: Add aipstz nodes
Date: Wed, 20 Jun 2018 15:06:19 -0300 [thread overview]
Message-ID: <1529517979-6406-1-git-send-email-festevam@gmail.com> (raw)
From: Fabio Estevam <fabio.estevam@nxp.com>
Currently when trying to use the 'devmem' tool to read/write
registers the following bus error is observed:
# devmem 0x73fa80c4 32
[ 82.689185] Unhandled fault: external abort on non-linefetch (0x1018) at 0xb6ff10c4
[ 82.697071] pgd = (ptrval)
[ 82.699920] [b6ff10c4] *pgd=a87c5831, *pte=73fa8383, *ppte=73fa8a33
Bus error
Add the aipstz nodes, so that the following function from
imx51_dt_init() can work properly:
imx_aips_allow_unprivileged_access("fsl,imx51-aipstz");
After adding these nodes, 'devmem' tool can work correctly,
which is very useful for debugging purposes.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm/boot/dts/imx51.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index fe01b89..55e4174 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -250,6 +250,11 @@
};
};
+ aipstz1: bridge at 73f00000 {
+ compatible = "fsl,imx51-aipstz";
+ reg = <0x73f00000 0x60>;
+ };
+
usbotg: usb at 73f80000 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80000 0x0200>;
@@ -435,6 +440,11 @@
reg = <0x80000000 0x10000000>;
ranges;
+ aipstz2: bridge at 83f00000 {
+ compatible = "fsl,imx51-aipstz";
+ reg = <0x83f00000 0x60>;
+ };
+
iim: iim at 83f98000 {
compatible = "fsl,imx51-iim", "fsl,imx27-iim";
reg = <0x83f98000 0x4000>;
--
2.7.4
next reply other threads:[~2018-06-20 18:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-20 18:06 Fabio Estevam [this message]
2018-07-01 3:17 ` [PATCH] ARM: imx51: Add aipstz nodes Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1529517979-6406-1-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).