[PATCH 2/2] ARM: imx_v6_v7_defconfig: Select ULPI support

[l.stach@pengutronix.de (Lucas Stach)]

Am Montag, den 25.06.2018, 09:34 -0300 schrieb Fabio Estevam:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that
> USB ULPI can be functional on some boards like imx51-babbge.
> 
> This fixes a kernel hang in 4.18-rc1 on i.mx51-babbage when
> the bootloader does not initialize USB.

If the kernel hangs without those options, we might want to have a
check for them in the driver, so it aborts the initialization with a
big warning if the port is using ULPI mode and those options aren't
selected.

Regards,
Lucas

> Suggested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
> ?arch/arm/configs/imx_v6_v7_defconfig | 2 ++
> ?1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/configs/imx_v6_v7_defconfig
> b/arch/arm/configs/imx_v6_v7_defconfig
> index d14de86..2da678c 100644
> --- a/arch/arm/configs/imx_v6_v7_defconfig
> +++ b/arch/arm/configs/imx_v6_v7_defconfig
> @@ -300,6 +300,7 @@ CONFIG_USB_STORAGE=y
> ?CONFIG_USB_CHIPIDEA=y
> ?CONFIG_USB_CHIPIDEA_UDC=y
> ?CONFIG_USB_CHIPIDEA_HOST=y
> +CONFIG_USB_CHIPIDEA_ULPI=y
> ?CONFIG_USB_SERIAL=m
> ?CONFIG_USB_SERIAL_GENERIC=y
> ?CONFIG_USB_SERIAL_FTDI_SIO=m
> @@ -336,6 +337,7 @@ CONFIG_USB_GADGETFS=m
> ?CONFIG_USB_FUNCTIONFS=m
> ?CONFIG_USB_MASS_STORAGE=m
> ?CONFIG_USB_G_SERIAL=m
> +CONFIG_USB_ULPI_BUS=y
> ?CONFIG_MMC=y
> ?CONFIG_MMC_SDHCI=y
> ?CONFIG_MMC_SDHCI_PLTFM=y