[PATCH V5 0/5] add iwdg2 support for stm32mp157c

[PATCH V5 0/5] add iwdg2 support for stm32mp157c

[Ludovic Barre]

From: Ludovic Barre <ludovic.barre@st.com>

This patch series updates stm32_iwdg driver to manage pclk
clock by compatible. stm32mp1 requires a pclk clock.

v5:
-update stm32f429.dtsi

v4:
-dt-bindings: split and review

v3:
-remove stm32_iwdg_config structure, just assign the
 boolean directly to .dat

Ludovic Barre (5):
  dt-bindings: watchdog: add stm32mp1 support
  watchdog: stm32: add pclk feature for stm32mp1
  ARM: dts: stm32: add iwdg2 support for stm32mp157c
  ARM: dts: stm32: add iwdg2 support for stm32mp157c-ed1
  ARM: dts: stm32: update iwdg with lsi clock name for stm32f429

 .../devicetree/bindings/watchdog/st,stm32-iwdg.txt |  13 ++-
 arch/arm/boot/dts/stm32f429.dtsi                   |   1 +
 arch/arm/boot/dts/stm32mp157c-ed1.dts              |   5 +
 arch/arm/boot/dts/stm32mp157c.dtsi                 |   8 ++
 drivers/watchdog/stm32_iwdg.c                      | 116 +++++++++++++--------
 5 files changed, 98 insertions(+), 45 deletions(-)

-- 
2.7.4

[PATCH V5 1/5] dt-bindings: watchdog: add stm32mp1 support

[Ludovic Barre]

From: Ludovic Barre <ludovic.barre@st.com>

This patch adds support of stm32mp1.
stm32mp1 requires 2 clocks lsi and pclk.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 .../devicetree/bindings/watchdog/st,stm32-iwdg.txt          | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
index cc13b10a..d8f4430 100644
--- a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
+++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
@@ -2,9 +2,15 @@ STM32 Independent WatchDoG (IWDG)
 ---------------------------------
 
 Required properties:
-- compatible: "st,stm32-iwdg"
-- reg: physical base address and length of the registers set for the device
-- clocks: must contain a single entry describing the clock input
+- compatible: Should be either:
+  - "st,stm32-iwdg"
+  - "st,stm32mp1-iwdg"
+- reg: Physical base address and length of the registers set for the device
+- clocks: Reference to the clock entry lsi. Additional pclk clock entry
+  is required only for st,stm32mp1-iwdg.
+- clock-names: Name of the clocks used.
+  "lsi" for st,stm32-iwdg
+  "lsi", "pclk" for st,stm32mp1-iwdg
 
 Optional Properties:
 - timeout-sec: Watchdog timeout value in seconds.
@@ -15,5 +21,6 @@ iwdg: watchdog at 40003000 {
 	compatible = "st,stm32-iwdg";
 	reg = <0x40003000 0x400>;
 	clocks = <&clk_lsi>;
+	clock-names = "lsi";
 	timeout-sec = <32>;
 };
-- 
2.7.4

[PATCH V5 1/5] dt-bindings: watchdog: add stm32mp1 support

[Rob Herring]

On Mon, Jun 25, 2018 at 05:42:59PM +0200, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@st.com>
> 
> This patch adds support of stm32mp1.
> stm32mp1 requires 2 clocks lsi and pclk.
> 
> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
> ---
>  .../devicetree/bindings/watchdog/st,stm32-iwdg.txt          | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH V5 1/5] dt-bindings: watchdog: add stm32mp1 support

[Guenter Roeck]

On 06/25/2018 08:42 AM, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@st.com>
> 
> This patch adds support of stm32mp1.
> stm32mp1 requires 2 clocks lsi and pclk.
> 
> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>

Following Rob's lead here.

Reviewed-by: Guenter Roeck Linux at roeck-us.net>

> ---
>   .../devicetree/bindings/watchdog/st,stm32-iwdg.txt          | 13 ++++++++++---
>   1 file changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
> index cc13b10a..d8f4430 100644
> --- a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
> +++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
> @@ -2,9 +2,15 @@ STM32 Independent WatchDoG (IWDG)
>   ---------------------------------
>   
>   Required properties:
> -- compatible: "st,stm32-iwdg"
> -- reg: physical base address and length of the registers set for the device
> -- clocks: must contain a single entry describing the clock input
> +- compatible: Should be either:
> +  - "st,stm32-iwdg"
> +  - "st,stm32mp1-iwdg"
> +- reg: Physical base address and length of the registers set for the device
> +- clocks: Reference to the clock entry lsi. Additional pclk clock entry
> +  is required only for st,stm32mp1-iwdg.
> +- clock-names: Name of the clocks used.
> +  "lsi" for st,stm32-iwdg
> +  "lsi", "pclk" for st,stm32mp1-iwdg
>   
>   Optional Properties:
>   - timeout-sec: Watchdog timeout value in seconds.
> @@ -15,5 +21,6 @@ iwdg: watchdog at 40003000 {
>   	compatible = "st,stm32-iwdg";
>   	reg = <0x40003000 0x400>;
>   	clocks = <&clk_lsi>;
> +	clock-names = "lsi";
>   	timeout-sec = <32>;
>   };
> 

[PATCH V5 2/5] watchdog: stm32: add pclk feature for stm32mp1

[Ludovic Barre]

From: Ludovic Barre <ludovic.barre@st.com>

This patch adds compatible data to manage pclk clock by
compatible. Adds stm32mp1 support which requires pclk clock.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
---
 drivers/watchdog/stm32_iwdg.c | 116 +++++++++++++++++++++++++++---------------
 1 file changed, 74 insertions(+), 42 deletions(-)

diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c
index c97ad56..e00e3b3 100644
--- a/drivers/watchdog/stm32_iwdg.c
+++ b/drivers/watchdog/stm32_iwdg.c
@@ -11,12 +11,13 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/watchdog.h>
 
@@ -54,11 +55,15 @@
 #define TIMEOUT_US	100000
 #define SLEEP_US	1000
 
+#define HAS_PCLK	true
+
 struct stm32_iwdg {
 	struct watchdog_device	wdd;
 	void __iomem		*regs;
-	struct clk		*clk;
+	struct clk		*clk_lsi;
+	struct clk		*clk_pclk;
 	unsigned int		rate;
+	bool			has_pclk;
 };
 
 static inline u32 reg_read(void __iomem *base, u32 reg)
@@ -133,6 +138,44 @@ static int stm32_iwdg_set_timeout(struct watchdog_device *wdd,
 	return 0;
 }
 
+static int stm32_iwdg_clk_init(struct platform_device *pdev,
+			       struct stm32_iwdg *wdt)
+{
+	u32 ret;
+
+	wdt->clk_lsi = devm_clk_get(&pdev->dev, "lsi");
+	if (IS_ERR(wdt->clk_lsi)) {
+		dev_err(&pdev->dev, "Unable to get lsi clock\n");
+		return PTR_ERR(wdt->clk_lsi);
+	}
+
+	/* optional peripheral clock */
+	if (wdt->has_pclk) {
+		wdt->clk_pclk = devm_clk_get(&pdev->dev, "pclk");
+		if (IS_ERR(wdt->clk_pclk)) {
+			dev_err(&pdev->dev, "Unable to get pclk clock\n");
+			return PTR_ERR(wdt->clk_pclk);
+		}
+
+		ret = clk_prepare_enable(wdt->clk_pclk);
+		if (ret) {
+			dev_err(&pdev->dev, "Unable to prepare pclk clock\n");
+			return ret;
+		}
+	}
+
+	ret = clk_prepare_enable(wdt->clk_lsi);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to prepare lsi clock\n");
+		clk_disable_unprepare(wdt->clk_pclk);
+		return ret;
+	}
+
+	wdt->rate = clk_get_rate(wdt->clk_lsi);
+
+	return 0;
+}
+
 static const struct watchdog_info stm32_iwdg_info = {
 	.options	= WDIOF_SETTIMEOUT |
 			  WDIOF_MAGICCLOSE |
@@ -147,49 +190,42 @@ static const struct watchdog_ops stm32_iwdg_ops = {
 	.set_timeout	= stm32_iwdg_set_timeout,
 };
 
+static const struct of_device_id stm32_iwdg_of_match[] = {
+	{ .compatible = "st,stm32-iwdg", .data = (void *)!HAS_PCLK },
+	{ .compatible = "st,stm32mp1-iwdg", .data = (void *)HAS_PCLK },
+	{ /* end node */ }
+};
+MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
+
 static int stm32_iwdg_probe(struct platform_device *pdev)
 {
 	struct watchdog_device *wdd;
+	const struct of_device_id *match;
 	struct stm32_iwdg *wdt;
 	struct resource *res;
-	void __iomem *regs;
-	struct clk *clk;
 	int ret;
 
+	match = of_match_device(stm32_iwdg_of_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->has_pclk = match->data;
+
 	/* This is the timer base. */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(regs)) {
+	wdt->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wdt->regs)) {
 		dev_err(&pdev->dev, "Could not get resource\n");
-		return PTR_ERR(regs);
+		return PTR_ERR(wdt->regs);
 	}
 
-	clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "Unable to get clock\n");
-		return PTR_ERR(clk);
-	}
-
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to prepare clock %p\n", clk);
+	ret = stm32_iwdg_clk_init(pdev, wdt);
+	if (ret)
 		return ret;
-	}
-
-	/*
-	 * Allocate our watchdog driver data, which has the
-	 * struct watchdog_device nested within it.
-	 */
-	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
-	if (!wdt) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	/* Initialize struct stm32_iwdg. */
-	wdt->regs = regs;
-	wdt->clk = clk;
-	wdt->rate = clk_get_rate(clk);
 
 	/* Initialize struct watchdog_device. */
 	wdd = &wdt->wdd;
@@ -217,7 +253,8 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
 
 	return 0;
 err:
-	clk_disable_unprepare(clk);
+	clk_disable_unprepare(wdt->clk_lsi);
+	clk_disable_unprepare(wdt->clk_pclk);
 
 	return ret;
 }
@@ -227,23 +264,18 @@ static int stm32_iwdg_remove(struct platform_device *pdev)
 	struct stm32_iwdg *wdt = platform_get_drvdata(pdev);
 
 	watchdog_unregister_device(&wdt->wdd);
-	clk_disable_unprepare(wdt->clk);
+	clk_disable_unprepare(wdt->clk_lsi);
+	clk_disable_unprepare(wdt->clk_pclk);
 
 	return 0;
 }
 
-static const struct of_device_id stm32_iwdg_of_match[] = {
-	{ .compatible = "st,stm32-iwdg" },
-	{ /* end node */ }
-};
-MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
-
 static struct platform_driver stm32_iwdg_driver = {
 	.probe		= stm32_iwdg_probe,
 	.remove		= stm32_iwdg_remove,
 	.driver = {
 		.name	= "iwdg",
-		.of_match_table = stm32_iwdg_of_match,
+		.of_match_table = of_match_ptr(stm32_iwdg_of_match),
 	},
 };
 module_platform_driver(stm32_iwdg_driver);
-- 
2.7.4

[PATCH V5 2/5] watchdog: stm32: add pclk feature for stm32mp1

[Guenter Roeck]

On 06/25/2018 08:43 AM, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@st.com>
> 
> This patch adds compatible data to manage pclk clock by
> compatible. Adds stm32mp1 support which requires pclk clock.
> 
> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>

I take it that everyone is aware that this patch will result in a window
where the driver won't work anymore since the DT files are not updated
yet and the clock name is now mandatory. This goes in line with my
unhappiness about the now mandatory clock names, even if there is only
a single clock.

Having said that, since everyone else is ok with it,

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   drivers/watchdog/stm32_iwdg.c | 116 +++++++++++++++++++++++++++---------------
>   1 file changed, 74 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c
> index c97ad56..e00e3b3 100644
> --- a/drivers/watchdog/stm32_iwdg.c
> +++ b/drivers/watchdog/stm32_iwdg.c
> @@ -11,12 +11,13 @@
>   
>   #include <linux/clk.h>
>   #include <linux/delay.h>
> -#include <linux/kernel.h>
> -#include <linux/module.h>
>   #include <linux/interrupt.h>
>   #include <linux/io.h>
>   #include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
>   #include <linux/of.h>
> +#include <linux/of_device.h>
>   #include <linux/platform_device.h>
>   #include <linux/watchdog.h>
>   
> @@ -54,11 +55,15 @@
>   #define TIMEOUT_US	100000
>   #define SLEEP_US	1000
>   
> +#define HAS_PCLK	true
> +
>   struct stm32_iwdg {
>   	struct watchdog_device	wdd;
>   	void __iomem		*regs;
> -	struct clk		*clk;
> +	struct clk		*clk_lsi;
> +	struct clk		*clk_pclk;
>   	unsigned int		rate;
> +	bool			has_pclk;
>   };
>   
>   static inline u32 reg_read(void __iomem *base, u32 reg)
> @@ -133,6 +138,44 @@ static int stm32_iwdg_set_timeout(struct watchdog_device *wdd,
>   	return 0;
>   }
>   
> +static int stm32_iwdg_clk_init(struct platform_device *pdev,
> +			       struct stm32_iwdg *wdt)
> +{
> +	u32 ret;
> +
> +	wdt->clk_lsi = devm_clk_get(&pdev->dev, "lsi");
> +	if (IS_ERR(wdt->clk_lsi)) {
> +		dev_err(&pdev->dev, "Unable to get lsi clock\n");
> +		return PTR_ERR(wdt->clk_lsi);
> +	}
> +
> +	/* optional peripheral clock */
> +	if (wdt->has_pclk) {
> +		wdt->clk_pclk = devm_clk_get(&pdev->dev, "pclk");
> +		if (IS_ERR(wdt->clk_pclk)) {
> +			dev_err(&pdev->dev, "Unable to get pclk clock\n");
> +			return PTR_ERR(wdt->clk_pclk);
> +		}
> +
> +		ret = clk_prepare_enable(wdt->clk_pclk);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Unable to prepare pclk clock\n");
> +			return ret;
> +		}
> +	}
> +
> +	ret = clk_prepare_enable(wdt->clk_lsi);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Unable to prepare lsi clock\n");
> +		clk_disable_unprepare(wdt->clk_pclk);
> +		return ret;
> +	}
> +
> +	wdt->rate = clk_get_rate(wdt->clk_lsi);
> +
> +	return 0;
> +}
> +
>   static const struct watchdog_info stm32_iwdg_info = {
>   	.options	= WDIOF_SETTIMEOUT |
>   			  WDIOF_MAGICCLOSE |
> @@ -147,49 +190,42 @@ static const struct watchdog_ops stm32_iwdg_ops = {
>   	.set_timeout	= stm32_iwdg_set_timeout,
>   };
>   
> +static const struct of_device_id stm32_iwdg_of_match[] = {
> +	{ .compatible = "st,stm32-iwdg", .data = (void *)!HAS_PCLK },
> +	{ .compatible = "st,stm32mp1-iwdg", .data = (void *)HAS_PCLK },
> +	{ /* end node */ }
> +};
> +MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
> +
>   static int stm32_iwdg_probe(struct platform_device *pdev)
>   {
>   	struct watchdog_device *wdd;
> +	const struct of_device_id *match;
>   	struct stm32_iwdg *wdt;
>   	struct resource *res;
> -	void __iomem *regs;
> -	struct clk *clk;
>   	int ret;
>   
> +	match = of_match_device(stm32_iwdg_of_match, &pdev->dev);
> +	if (!match)
> +		return -ENODEV;
> +
> +	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> +	if (!wdt)
> +		return -ENOMEM;
> +
> +	wdt->has_pclk = match->data;
> +
>   	/* This is the timer base. */
>   	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	regs = devm_ioremap_resource(&pdev->dev, res);
> -	if (IS_ERR(regs)) {
> +	wdt->regs = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(wdt->regs)) {
>   		dev_err(&pdev->dev, "Could not get resource\n");
> -		return PTR_ERR(regs);
> +		return PTR_ERR(wdt->regs);
>   	}
>   
> -	clk = devm_clk_get(&pdev->dev, NULL);
> -	if (IS_ERR(clk)) {
> -		dev_err(&pdev->dev, "Unable to get clock\n");
> -		return PTR_ERR(clk);
> -	}
> -
> -	ret = clk_prepare_enable(clk);
> -	if (ret) {
> -		dev_err(&pdev->dev, "Unable to prepare clock %p\n", clk);
> +	ret = stm32_iwdg_clk_init(pdev, wdt);
> +	if (ret)
>   		return ret;
> -	}
> -
> -	/*
> -	 * Allocate our watchdog driver data, which has the
> -	 * struct watchdog_device nested within it.
> -	 */
> -	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> -	if (!wdt) {
> -		ret = -ENOMEM;
> -		goto err;
> -	}
> -
> -	/* Initialize struct stm32_iwdg. */
> -	wdt->regs = regs;
> -	wdt->clk = clk;
> -	wdt->rate = clk_get_rate(clk);
>   
>   	/* Initialize struct watchdog_device. */
>   	wdd = &wdt->wdd;
> @@ -217,7 +253,8 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
>   
>   	return 0;
>   err:
> -	clk_disable_unprepare(clk);
> +	clk_disable_unprepare(wdt->clk_lsi);
> +	clk_disable_unprepare(wdt->clk_pclk);
>   
>   	return ret;
>   }
> @@ -227,23 +264,18 @@ static int stm32_iwdg_remove(struct platform_device *pdev)
>   	struct stm32_iwdg *wdt = platform_get_drvdata(pdev);
>   
>   	watchdog_unregister_device(&wdt->wdd);
> -	clk_disable_unprepare(wdt->clk);
> +	clk_disable_unprepare(wdt->clk_lsi);
> +	clk_disable_unprepare(wdt->clk_pclk);
>   
>   	return 0;
>   }
>   
> -static const struct of_device_id stm32_iwdg_of_match[] = {
> -	{ .compatible = "st,stm32-iwdg" },
> -	{ /* end node */ }
> -};
> -MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
> -
>   static struct platform_driver stm32_iwdg_driver = {
>   	.probe		= stm32_iwdg_probe,
>   	.remove		= stm32_iwdg_remove,
>   	.driver = {
>   		.name	= "iwdg",
> -		.of_match_table = stm32_iwdg_of_match,
> +		.of_match_table = of_match_ptr(stm32_iwdg_of_match),
>   	},
>   };
>   module_platform_driver(stm32_iwdg_driver);
> 

[PATCH V5 3/5] ARM: dts: stm32: add iwdg2 support for stm32mp157c

[Ludovic Barre]

From: Ludovic Barre <ludovic.barre@st.com>

This patch adds independent watchdog support for stm32mp157c.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 7d17538..95cc166 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -784,6 +784,14 @@
 			status = "disabled";
 		};
 
+		iwdg2: watchdog at 5a002000 {
+			compatible = "st,stm32mp1-iwdg";
+			reg = <0x5a002000 0x400>;
+			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+			clock-names = "pclk", "lsi";
+			status = "disabled";
+		};
+
 		usbphyc: usbphyc at 5a006000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.7.4

[PATCH V5 3/5] ARM: dts: stm32: add iwdg2 support for stm32mp157c

[Guenter Roeck]

On 06/25/2018 08:43 AM, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@st.com>
> 
> This patch adds independent watchdog support for stm32mp157c.
> 
> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>

Acked-by: Guenter Roeck <linux@roeck-us.net>

Presumably this and the following patches will be pushed upstream
through an ARM tree.

Guenter

> ---
>   arch/arm/boot/dts/stm32mp157c.dtsi | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
> index 7d17538..95cc166 100644
> --- a/arch/arm/boot/dts/stm32mp157c.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157c.dtsi
> @@ -784,6 +784,14 @@
>   			status = "disabled";
>   		};
>   
> +		iwdg2: watchdog at 5a002000 {
> +			compatible = "st,stm32mp1-iwdg";
> +			reg = <0x5a002000 0x400>;
> +			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
> +			clock-names = "pclk", "lsi";
> +			status = "disabled";
> +		};
> +
>   		usbphyc: usbphyc at 5a006000 {
>   			#address-cells = <1>;
>   			#size-cells = <0>;
> 

[PATCH V5 4/5] ARM: dts: stm32: add iwdg2 support for stm32mp157c-ed1

[Ludovic Barre]

From: Ludovic Barre <ludovic.barre@st.com>

This patch activates independent watchdog support for
stm32mp157c board.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 arch/arm/boot/dts/stm32mp157c-ed1.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index ae33653..8af263a 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -68,6 +68,11 @@
 	status = "okay";
 };
 
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
-- 
2.7.4

[PATCH V5 4/5] ARM: dts: stm32: add iwdg2 support for stm32mp157c-ed1

[Guenter Roeck]

On 06/25/2018 08:43 AM, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@st.com>
> 
> This patch activates independent watchdog support for
> stm32mp157c board.
> 
> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   arch/arm/boot/dts/stm32mp157c-ed1.dts | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
> index ae33653..8af263a 100644
> --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
> @@ -68,6 +68,11 @@
>   	status = "okay";
>   };
>   
> +&iwdg2 {
> +	timeout-sec = <32>;
> +	status = "okay";
> +};
> +
>   &uart4 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&uart4_pins_a>;
> 

[PATCH V5 5/5] ARM: dts: stm32: update iwdg with lsi clock name for stm32f429

[Ludovic Barre]

From: Ludovic Barre <ludovic.barre@st.com>

This patch updates iwdg watchdog to use lsi clock name.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index ede77e0..39ea13a 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -310,6 +310,7 @@
 			compatible = "st,stm32-iwdg";
 			reg = <0x40003000 0x400>;
 			clocks = <&clk_lsi>;
+			clock-names = "lsi";
 			status = "disabled";
 		};
 
-- 
2.7.4

[PATCH V5 5/5] ARM: dts: stm32: update iwdg with lsi clock name for stm32f429

[Guenter Roeck]

On 06/25/2018 08:43 AM, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@st.com>
> 
> This patch updates iwdg watchdog to use lsi clock name.
> 
> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>

Acked-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   arch/arm/boot/dts/stm32f429.dtsi | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index ede77e0..39ea13a 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -310,6 +310,7 @@
>   			compatible = "st,stm32-iwdg";
>   			reg = <0x40003000 0x400>;
>   			clocks = <&clk_lsi>;
> +			clock-names = "lsi";
>   			status = "disabled";
>   		};
>   
> 

[PATCH V5 0/5] add iwdg2 support for stm32mp157c

[Alexandre Torgue]

Hi Guenter

On 06/25/2018 05:42 PM, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@st.com>
> 
> This patch series updates stm32_iwdg driver to manage pclk
> clock by compatible. stm32mp1 requires a pclk clock.
> 
> v5:
> -update stm32f429.dtsi
> 
> v4:
> -dt-bindings: split and review
> 
> v3:
> -remove stm32_iwdg_config structure, just assign the
>   boolean directly to .dat
> 
> Ludovic Barre (5):
>    dt-bindings: watchdog: add stm32mp1 support
>    watchdog: stm32: add pclk feature for stm32mp1
>    ARM: dts: stm32: add iwdg2 support for stm32mp157c
>    ARM: dts: stm32: add iwdg2 support for stm32mp157c-ed1
>    ARM: dts: stm32: update iwdg with lsi clock name for stm32f429

I will take DT patches in my tree.

Thanks
alex

> 
>   .../devicetree/bindings/watchdog/st,stm32-iwdg.txt |  13 ++-
>   arch/arm/boot/dts/stm32f429.dtsi                   |   1 +
>   arch/arm/boot/dts/stm32mp157c-ed1.dts              |   5 +
>   arch/arm/boot/dts/stm32mp157c.dtsi                 |   8 ++
>   drivers/watchdog/stm32_iwdg.c                      | 116 +++++++++++++--------
>   5 files changed, 98 insertions(+), 45 deletions(-)
> 

[PATCH V5 0/5] add iwdg2 support for stm32mp157c

[Alexandre Torgue]

Hi Ludovic

On 06/25/2018 05:42 PM, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@st.com>
> 
> This patch series updates stm32_iwdg driver to manage pclk
> clock by compatible. stm32mp1 requires a pclk clock.
> 
> v5:
> -update stm32f429.dtsi
> 
> v4:
> -dt-bindings: split and review
> 
> v3:
> -remove stm32_iwdg_config structure, just assign the
>   boolean directly to .dat
> 
> Ludovic Barre (5):
>    dt-bindings: watchdog: add stm32mp1 support
>    watchdog: stm32: add pclk feature for stm32mp1
>    ARM: dts: stm32: add iwdg2 support for stm32mp157c
>    ARM: dts: stm32: add iwdg2 support for stm32mp157c-ed1
>    ARM: dts: stm32: update iwdg with lsi clock name for stm32f429
> 
>   .../devicetree/bindings/watchdog/st,stm32-iwdg.txt |  13 ++-
>   arch/arm/boot/dts/stm32f429.dtsi                   |   1 +
>   arch/arm/boot/dts/stm32mp157c-ed1.dts              |   5 +
>   arch/arm/boot/dts/stm32mp157c.dtsi                 |   8 ++
>   drivers/watchdog/stm32_iwdg.c                      | 116 +++++++++++++--------
>   5 files changed, 98 insertions(+), 45 deletions(-)
> 

STM32 DT patches applied on stm32-next.

Regards
Alex