linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5 3/3] PCI: Mask and unmask hotplug interrupts during reset
Date: Mon,  2 Jul 2018 18:52:47 -0400	[thread overview]
Message-ID: <1530571967-19099-4-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1530571967-19099-1-git-send-email-okaya@codeaurora.org>

If a bridge supports hotplug and observes a PCIe fatal error, the following
events happen:

1. AER driver removes the devices from PCI tree on fatal error
2. AER driver brings down the link by issuing a secondary bus reset waits
for the link to come up.
3. Hotplug driver observes a link down interrupt
4. Hotplug driver tries to remove the devices waiting for the rescan lock
but devices are already removed by the AER driver and AER driver is waiting
for the link to come back up.
5. AER driver tries to re-enumerate devices after polling for the link
state to go up.
6. Hotplug driver obtains the lock and tries to remove the devices again.

If a bridge is a hotplug capable bridge, mask hotplug interrupts before the
reset and unmask afterwards.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/pci/pcie/err.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index ae72f88..5a2d410 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -285,10 +285,12 @@ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
  */
 void pcie_do_fatal_recovery(struct pci_dev *dev, u32 service)
 {
+	struct pcie_port_service_driver *hpsvc;
 	struct pci_dev *udev;
 	struct pci_bus *parent;
 	struct pci_dev *pdev, *temp;
 	pci_ers_result_t result;
+	struct device *hpdev;
 
 	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
 		udev = dev;
@@ -308,8 +310,17 @@ void pcie_do_fatal_recovery(struct pci_dev *dev, u32 service)
 		pci_dev_put(pdev);
 	}
 
+	hpsvc = pcie_port_find_service(udev, PCIE_PORT_SERVICE_HP);
+	hpdev = pcie_port_find_device(udev, PCIE_PORT_SERVICE_HP);
+
+	if (hpdev && hpsvc)
+		hpsvc->mask_irq(to_pcie_device(hpdev));
+
 	result = reset_link(udev, service);
 
+	if (hpdev && hpsvc)
+		hpsvc->unmask_irq(to_pcie_device(hpdev));
+
 	if ((service == PCIE_PORT_SERVICE_AER) &&
 	    (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
 		/*
-- 
2.7.4

  parent reply	other threads:[~2018-07-02 22:52 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-02 22:52 [PATCH V5 0/3] PCI: separate hotplug handling from fatal error handling Sinan Kaya
2018-07-02 22:52 ` [PATCH V5 1/3] PCI: pciehp: implement mask and unmask interrupt functions Sinan Kaya
2018-07-02 22:52 ` [PATCH V5 2/3] PCI: pciehp: reuse pciehp_mask/unmask_irq() in reset_slot() Sinan Kaya
2018-07-02 22:52 ` Sinan Kaya [this message]
     [not found]   ` <20180703083447.GA2689@wunner.de>
2018-07-03 10:52     ` [PATCH V5 3/3] PCI: Mask and unmask hotplug interrupts during reset poza at codeaurora.org
2018-07-03 12:04       ` okaya at codeaurora.org
2018-07-03 11:30     ` okaya at codeaurora.org
2018-07-03 13:11       ` poza at codeaurora.org
2018-07-03 13:25         ` Sinan Kaya
2018-07-03 13:31           ` Sinan Kaya
     [not found]             ` <20180703135956.GA18639@wunner.de>
2018-07-03 14:10               ` poza at codeaurora.org
2018-07-03 15:34               ` Sinan Kaya
     [not found]       ` <20180703141255.GB18639@wunner.de>
2018-07-03 14:29         ` poza at codeaurora.org
     [not found]   ` <20180703143434.GA4086@wunner.de>
2018-07-03 15:12     ` poza at codeaurora.org
2018-07-03 15:49       ` Sinan Kaya
2018-07-03 15:43     ` Sinan Kaya
     [not found]       ` <20180708171418.GA11476@wunner.de>
2018-07-09 14:48         ` Sinan Kaya
     [not found]           ` <20180709160008.GA1490@wunner.de>
2018-07-10 18:30             ` Sinan Kaya
2018-07-20 20:01               ` Bjorn Helgaas
2018-07-21  2:58                 ` Sinan Kaya
2018-07-21  6:07                   ` Sinan Kaya
2018-07-25  8:29                     ` poza at codeaurora.org
2018-07-31 18:44 ` [PATCH V5 0/3] PCI: separate hotplug handling from fatal error handling Bjorn Helgaas
2018-07-31 18:54   ` Sinan Kaya
2018-07-31 20:16     ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1530571967-19099-4-git-send-email-okaya@codeaurora.org \
    --to=okaya@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).