From mboxrd@z Thu Jan 1 00:00:00 1970 From: l.stach@pengutronix.de (Lucas Stach) Date: Wed, 11 Jul 2018 14:29:46 +0200 Subject: [PATCH v3 1/2] soc: imx: gpc: Disable 6sl display power gating for ERR006287 In-Reply-To: <1cc67fd7d1214f93f7ace6f0c2a46303f79a828e.camel@nxp.com> References: <1531311392.3163.47.camel@pengutronix.de> <1cc67fd7d1214f93f7ace6f0c2a46303f79a828e.camel@nxp.com> Message-ID: <1531312186.3163.52.camel@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Am Mittwoch, den 11.07.2018, 15:21 +0300 schrieb Leonard Crestez: > On Wed, 2018-07-11 at 14:16 +0200, Lucas Stach wrote: > > Am Mittwoch, den 11.07.2018, 15:11 +0300 schrieb Leonard Crestez: > > > Handle this in the safest possible way by keeping the DISP domain > > > always-on. > > > > > > Signed-off-by: Leonard Crestez > > > > Reviewed-by: Lucas Stach > > > > Can you send a follow on patch to switch the i.MX6QP errata > > workaround > > to use GENPD_FLAG_ALWAYS_ON and remove the -EBUSY stuff in the > > power > > down path? > > Sure. > > I was thinking of converting it to a new GENPD_FLAG which allows > power_off in suspend (as suggested by Ulf) but switching to > GENPD_FLAG_ALWAYS_ON in order to simplify the code could be done > first. Sure, if you are going to work on this I'm fine with converting it over to this without first going for GENPD_FLAG_ALWAYS_ON. Just wanted to make sure that things are consistent. > The -EBUSY stuff is not very harmful. It's dead code once the appropriate flags have been added to the domain, so should be removed. Regards, Lucas