From mboxrd@z Thu Jan 1 00:00:00 1970 From: clabbe@baylibre.com (Corentin Labbe) Date: Fri, 13 Jul 2018 11:03:04 +0000 Subject: [PATCH v3 7/9] dt-bindings: ata: ahci-platform: document port-supply In-Reply-To: <1531479786-4911-1-git-send-email-clabbe@baylibre.com> References: <1531479786-4911-1-git-send-email-clabbe@baylibre.com> Message-ID: <1531479786-4911-8-git-send-email-clabbe@baylibre.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch document the new optional port-supply Signed-off-by: Corentin Labbe --- Documentation/devicetree/bindings/ata/ahci-platform.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 47652521a6ed..40a636b9851e 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -31,6 +31,7 @@ Optional properties: - dma-coherent : Present if dma operations are coherent - clocks : a list of phandle + clock specifier pairs - target-supply : regulator for SATA target power +- port-supply : regulator for SATA port - phys : reference to the SATA PHY node - phy-names : must be "sata-phy" - ahci-supply : regulator for AHCI controller @@ -51,6 +52,7 @@ Sub-nodes required properties: And at least one of the following properties: - phys : reference to the SATA PHY node - target-supply : regulator for SATA target power +- port-supply : regulator for SATA port Examples: sata at ffe08000 { -- 2.16.4