From: manish.narani@xilinx.com (Manish Narani)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] iio: adc: xilinx: Use devm_ functions while requesting irq
Date: Wed, 18 Jul 2018 16:42:11 +0530 [thread overview]
Message-ID: <1531912331-26431-5-git-send-email-manish.narani@xilinx.com> (raw)
In-Reply-To: <1531912331-26431-1-git-send-email-manish.narani@xilinx.com>
This patch adds support for using devm_ functions for requesting irq.
This will let the core free irq itself whenever the error condition
happens in probe or when xadc_remove is called.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
drivers/iio/adc/xilinx-xadc-core.c | 18 +++++++-----------
1 file changed, 7 insertions(+), 11 deletions(-)
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 47eb364..7cadcc77 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1229,8 +1229,8 @@ static int xadc_probe(struct platform_device *pdev)
if (ret)
goto err_clk_disable_unprepare;
- ret = request_irq(irq, xadc->ops->interrupt_handler, 0,
- dev_name(&pdev->dev), indio_dev);
+ ret = devm_request_irq(&pdev->dev, irq, xadc->ops->interrupt_handler, 0,
+ dev_name(&pdev->dev), indio_dev);
if (ret)
goto err_clk_disable_unprepare;
@@ -1240,7 +1240,7 @@ static int xadc_probe(struct platform_device *pdev)
ret = xadc_write_adc_reg(xadc, XADC_REG_CONF0, conf0);
if (ret)
- goto err_free_irq;
+ goto err_clk_disable_unprepare;
bipolar_mask = 0;
for (i = 0; i < indio_dev->num_channels; i++) {
@@ -1250,17 +1250,17 @@ static int xadc_probe(struct platform_device *pdev)
ret = xadc_write_adc_reg(xadc, XADC_REG_INPUT_MODE(0), bipolar_mask);
if (ret)
- goto err_free_irq;
+ goto err_clk_disable_unprepare;
ret = xadc_write_adc_reg(xadc, XADC_REG_INPUT_MODE(1),
bipolar_mask >> 16);
if (ret)
- goto err_free_irq;
+ goto err_clk_disable_unprepare;
/* Disable all alarms */
ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_ALARM_MASK,
XADC_CONF1_ALARM_MASK);
if (ret)
- goto err_free_irq;
+ goto err_clk_disable_unprepare;
/* Set thresholds to min/max */
for (i = 0; i < 16; i++) {
@@ -1281,14 +1281,12 @@ static int xadc_probe(struct platform_device *pdev)
ret = iio_device_register(indio_dev);
if (ret)
- goto err_free_irq;
+ goto err_clk_disable_unprepare;
platform_set_drvdata(pdev, indio_dev);
return 0;
-err_free_irq:
- free_irq(irq, indio_dev);
err_clk_disable_unprepare:
clk_disable_unprepare(xadc->clk);
err_free_samplerate_trigger:
@@ -1310,7 +1308,6 @@ static int xadc_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct xadc *xadc = iio_priv(indio_dev);
- int irq = platform_get_irq(pdev, 0);
iio_device_unregister(indio_dev);
if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
@@ -1318,7 +1315,6 @@ static int xadc_remove(struct platform_device *pdev)
iio_trigger_free(xadc->convst_trigger);
iio_triggered_buffer_cleanup(indio_dev);
}
- free_irq(irq, indio_dev);
clk_disable_unprepare(xadc->clk);
cancel_delayed_work(&xadc->zynq_unmask_work);
kfree(xadc->data);
--
2.1.1
next prev parent reply other threads:[~2018-07-18 11:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-18 11:12 [PATCH 0/4] iio: adc: xilinx: XADC driver enhancements and bug fixes Manish Narani
2018-07-18 11:12 ` [PATCH 1/4] iio: adc: xilinx: Rename 'channels' variable name to 'iio_xadc_channels' Manish Narani
2018-07-18 11:18 ` Lars-Peter Clausen
2018-07-18 11:52 ` Manish Narani
2018-07-19 8:22 ` Michal Simek
2018-07-21 16:18 ` Jonathan Cameron
2018-07-21 16:22 ` Joe Perches
2018-07-21 16:33 ` Jonathan Cameron
2018-07-18 11:12 ` [PATCH 2/4] iio: adc: xilinx: Remove dead code from xadc_zynq_setup Manish Narani
2018-07-21 16:22 ` Jonathan Cameron
2018-07-18 11:12 ` [PATCH 3/4] iio: adc: xilinx: Check for return values in clk related functions Manish Narani
2018-07-19 16:40 ` Lars-Peter Clausen
2018-07-21 16:24 ` Jonathan Cameron
2018-07-23 9:34 ` Manish Narani
2018-07-18 11:12 ` Manish Narani [this message]
2018-07-19 16:37 ` [PATCH 4/4] iio: adc: xilinx: Use devm_ functions while requesting irq Lars-Peter Clausen
2018-07-23 9:27 ` Manish Narani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1531912331-26431-5-git-send-email-manish.narani@xilinx.com \
--to=manish.narani@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).