* [PATCH] reset: uniphier: add reset control support for SPI
@ 2018-07-19 6:18 Keiji Hayashibara
2018-07-19 8:13 ` Masahiro Yamada
2018-07-19 9:22 ` Philipp Zabel
0 siblings, 2 replies; 3+ messages in thread
From: Keiji Hayashibara @ 2018-07-19 6:18 UTC (permalink / raw)
To: linux-arm-kernel
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Add reset control for SPI controller on UniPhier SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
drivers/reset/reset-uniphier.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index e9030ff..5605745 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -202,6 +202,12 @@ static const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
#define UNIPHIER_PERI_RESET_FI2C(id, ch) \
UNIPHIER_RESETX((id), 0x114, 24 + (ch))
+#define UNIPHIER_PERI_RESET_SCSSI(id) \
+ UNIPHIER_RESETX((id), 0x110, 17)
+
+#define UNIPHIER_PERI_RESET_MCSSI(id) \
+ UNIPHIER_RESETX((id), 0x114, 14)
+
static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_UART(0, 0),
UNIPHIER_PERI_RESET_UART(1, 1),
@@ -212,6 +218,7 @@ static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_I2C(6, 2),
UNIPHIER_PERI_RESET_I2C(7, 3),
UNIPHIER_PERI_RESET_I2C(8, 4),
+ UNIPHIER_PERI_RESET_SCSSI(11),
UNIPHIER_RESET_END,
};
@@ -227,6 +234,8 @@ static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_FI2C(8, 4),
UNIPHIER_PERI_RESET_FI2C(9, 5),
UNIPHIER_PERI_RESET_FI2C(10, 6),
+ UNIPHIER_PERI_RESET_SCSSI(11),
+ UNIPHIER_PERI_RESET_MCSSI(12),
UNIPHIER_RESET_END,
};
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH] reset: uniphier: add reset control support for SPI
2018-07-19 6:18 [PATCH] reset: uniphier: add reset control support for SPI Keiji Hayashibara
@ 2018-07-19 8:13 ` Masahiro Yamada
2018-07-19 9:22 ` Philipp Zabel
1 sibling, 0 replies; 3+ messages in thread
From: Masahiro Yamada @ 2018-07-19 8:13 UTC (permalink / raw)
To: linux-arm-kernel
2018-07-19 15:18 GMT+09:00 Keiji Hayashibara <hayashibara.keiji@socionext.com>:
> From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
>
> Add reset control for SPI controller on UniPhier SoCs.
>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> drivers/reset/reset-uniphier.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
> index e9030ff..5605745 100644
> --- a/drivers/reset/reset-uniphier.c
> +++ b/drivers/reset/reset-uniphier.c
> @@ -202,6 +202,12 @@ static const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
> #define UNIPHIER_PERI_RESET_FI2C(id, ch) \
> UNIPHIER_RESETX((id), 0x114, 24 + (ch))
>
> +#define UNIPHIER_PERI_RESET_SCSSI(id) \
> + UNIPHIER_RESETX((id), 0x110, 17)
> +
> +#define UNIPHIER_PERI_RESET_MCSSI(id) \
> + UNIPHIER_RESETX((id), 0x114, 14)
> +
> static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
> UNIPHIER_PERI_RESET_UART(0, 0),
> UNIPHIER_PERI_RESET_UART(1, 1),
> @@ -212,6 +218,7 @@ static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
> UNIPHIER_PERI_RESET_I2C(6, 2),
> UNIPHIER_PERI_RESET_I2C(7, 3),
> UNIPHIER_PERI_RESET_I2C(8, 4),
> + UNIPHIER_PERI_RESET_SCSSI(11),
> UNIPHIER_RESET_END,
> };
>
> @@ -227,6 +234,8 @@ static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
> UNIPHIER_PERI_RESET_FI2C(8, 4),
> UNIPHIER_PERI_RESET_FI2C(9, 5),
> UNIPHIER_PERI_RESET_FI2C(10, 6),
> + UNIPHIER_PERI_RESET_SCSSI(11),
> + UNIPHIER_PERI_RESET_MCSSI(12),
> UNIPHIER_RESET_END,
> };
>
> --
> 2.7.4
>
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH] reset: uniphier: add reset control support for SPI
2018-07-19 6:18 [PATCH] reset: uniphier: add reset control support for SPI Keiji Hayashibara
2018-07-19 8:13 ` Masahiro Yamada
@ 2018-07-19 9:22 ` Philipp Zabel
1 sibling, 0 replies; 3+ messages in thread
From: Philipp Zabel @ 2018-07-19 9:22 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 2018-07-19 at 15:18 +0900, Keiji Hayashibara wrote:
> From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
>
> Add reset control for SPI controller on UniPhier SoCs.
>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Thank you, applied to reset/next.
regards
Philipp
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-07-19 9:22 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-07-19 6:18 [PATCH] reset: uniphier: add reset control support for SPI Keiji Hayashibara
2018-07-19 8:13 ` Masahiro Yamada
2018-07-19 9:22 ` Philipp Zabel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).