From mboxrd@z Thu Jan 1 00:00:00 1970 From: festevam@gmail.com (Fabio Estevam) Date: Fri, 20 Jul 2018 17:39:19 -0300 Subject: [PATCH 4/6] ARM: dts: imx23-evk: Convert to the new display bindings In-Reply-To: <1532119161-16597-1-git-send-email-festevam@gmail.com> References: <1532119161-16597-1-git-send-email-festevam@gmail.com> Message-ID: <1532119161-16597-4-git-send-email-festevam@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Fabio Estevam imx23-evk board has a Seiko 43WVF1G parallel display. Instead of hardcoding the display timings in the device tree, use the "sii,43wvf1g" compatible instead. This aligns with the new mxsfb bindings scheme documented at: Documentation/devicetree/bindings/display/mxsfb.txt Signed-off-by: Fabio Estevam --- arch/arm/boot/dts/imx23-evk.dts | 48 ++++++++++++++++++++--------------------- 1 file changed, 24 insertions(+), 24 deletions(-) diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 494095d..ad2ae25 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -30,6 +30,26 @@ enable-active-high; }; + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + apb at 80000000 { apbh at 80000000 { gpmi-nand at 8000c000 { @@ -69,31 +89,11 @@ lcdif at 80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9200000>; - hactive = <480>; - vactive = <272>; - hback-porch = <15>; - hfront-porch = <8>; - vback-porch = <12>; - vfront-porch = <4>; - hsync-len = <1>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; @@ -135,7 +135,7 @@ }; }; - backlight { + backlight_display: backlight { compatible = "pwm-backlight"; pwms = <&pwm 2 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; -- 2.7.4